Question about 1998 Plymouth Neon

Open Question

Codes p1899 plymouth neon - 1998 Plymouth Neon

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: need to know what the trouble code numbers are

P0743 is the Torque Converter Circuit Solenoid.The solenoid plug is on the front of the transmission and has a dark green/white and orange/black wire. The dark green/white should have 12V on it from fuse #10 when the ignition is on. The orange/black is a grounding wire from pin 79 of the powertrain controller which should only be grounded when the car is going over 45 mph or so. You could check that the wire is patent between the plug and the powertrain plug (near 0 ohms). The solenoid is a coil or wire so it would have a low, but non-0 resistance, maybe less than an ohm, but still not 0. To really test it you would need an impedence meter, but a good digital ohmmeter should show it to be slightly more resistance than is shown when you test the resistance of the meter leads themselves.If the resistance, the patency, and the 12V supply is all shown to be OK, then I would suspect the solenoid is not functing properly. If you are getting torque converter lock up when you accelerate slowly from 40 to 50 mph then it is working and the code is false. P1899 Park or neutral position switch stuck in park or gear. Recap: P0743 Torque converter clutch circuit faulty, P1899 Position switch to park and nutral stuck. Check the wire harness and look for any clips may be lose or disconnected and wires condition. Good luck and keep me posted. be glad to help

Posted on Jun 06, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1899 code for1998 Plymouth voyager


The p1899 code is for a faulty park/neutral switch which is located on your transmission. Changing it involves disconnecting the wiring harness that goes to it, unbolting the switch, losing some transmission fluid, installing the new switch and topping the fluid off. Big problems arise from having too much or too little fluid in a transmission. Even a small amount or under the proper level can pose a threat. I'd take it to a repair shop and let them handle the job.

Feb 20, 2015 | 1998 Plymouth Voyager

2 Answers

Why wont my 2001 plymouth neon start 562 code


Low voltage ,check battery and connection.

Aug 08, 2014 | 2001 Plymouth Neon

1 Answer

2000 plymouth neon p1899


According to my source, code 1899 is a problem with the governor pressure sensor. But 4 digit codes are model specific, so you may be right about the selector switch.
If the switch tests out to be faulty, it would need to be replaced and the code erased.

May 04, 2013 | 2000 Plymouth Neon

1 Answer

1999 plymouth neon error code 13


Generic code is Camshaft Position Sensor

Apr 24, 2010 | 1999 Plymouth Neon

1 Answer

What is an engine code 37 for a 1999 plymouth neon ?


If the code you read is a P0037 that indicated HO2S heater control circuit low ( bank 1sensor 2)

Mar 26, 2010 | 1999 Plymouth Neon

1 Answer

Car codes


manufacturer control fuel air metering, p1237.

Aug 01, 2009 | 1999 Plymouth Neon

1 Answer

P1193 code obd2


Inlet air temperature sensor needs replacement.

Jun 29, 2009 | 2001 Plymouth Neon

2 Answers

Need to know what the trouble code numbers are


P0743 is the Torque Converter Circuit Solenoid.The solenoid plug is on the front of the transmission and has a dark green/white and orange/black wire. The dark green/white should have 12V on it from fuse #10 when the ignition is on. The orange/black is a grounding wire from pin 79 of the powertrain controller which should only be grounded when the car is going over 45 mph or so. You could check that the wire is patent between the plug and the powertrain plug (near 0 ohms). The solenoid is a coil or wire so it would have a low, but non-0 resistance, maybe less than an ohm, but still not 0. To really test it you would need an impedence meter, but a good digital ohmmeter should show it to be slightly more resistance than is shown when you test the resistance of the meter leads themselves.If the resistance, the patency, and the 12V supply is all shown to be OK, then I would suspect the solenoid is not functing properly. If you are getting torque converter lock up when you accelerate slowly from 40 to 50 mph then it is working and the code is false. P1899 Park or neutral position switch stuck in park or gear. Recap: P0743 Torque converter clutch circuit faulty, P1899 Position switch to park and nutral stuck. Check the wire harness and look for any clips may be lose or disconnected and wires condition. Good luck and keep me posted. be glad to help

Jun 06, 2009 | 2000 Plymouth Neon

Not finding what you are looking for?
1998 Plymouth Neon Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...