Question about 2009 Ford F-450 Super Duty
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try checking all of your fuses and see which ones are blown. you have two sets of fuses and they are under the hood of the vehicle and under the dash on the driverside or in the glove box. if the don't work after changing the fuses then your wiring for the turn signals and brake lights need to be cheked from the fuse boxes to the swith for the trurn signal and to your brake lights
Posted on Mar 24, 2009
the fuel pump and radio are not on the same circuit, most liokely the fuel pump is shorted, that is the most common cause, get under the truck and disconnect the fuel pump connector at the tank, if the fuse doesn't blow then u need a new pump.
Posted on Dec 05, 2009
SOURCE: motor will idle but when
The cat. should not be plugged on a truck that is only 3 years old. might be faulty ignition component(s). Check inside distributor cap for moisture or metal particles. dim or turn off lights in garage and spray a fine mist of water from a spray bottle over cap and spark plug wires take note of any arcing of spark. this could indicate faulty plug wires. GOOD LUCK. If it is the cat. that is bad on a truck this new it is a symptom of a bigger problem.
Posted on Mar 14, 2011
Tips for a great answer:
Dec 31, 2014 | 2008 Chevrolet Hhr
Aug 14, 2014 | 2004 Ford Ranger Super
Mar 14, 2011 | 2008 Ford F 450 Super Duty
Dec 28, 2010 | 2008 Toyota Sienna
Dec 05, 2009 | 2008 Ford F 450 Super Duty
Mar 24, 2009 | 1999 Ford Super Duty F 450
Feb 19, 2009 | 2008 Dodge Ram 3500
Dec 23, 2008 | 2001 Daewoo Leganza
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: