Question about 1997 Volkswagen Golf

1 Answer

Wauxhall Vectra B ECU err. code 1528

I have an error code on my '97 Wauxhall Vectra B X18XE engine with simtec 56.5 error code: 1528. I could'nt find in ECU codes what it's mean.There are 1503 and the next code is 1530 only.

Posted by on

  • bela_cseke Jun 19, 2009

    Many thanks for "emissionwiz" for quickly answer. I have to ask under Wolkswagen 'cos there have no choice for Opel/Vauxhall cars.
    I have just one more question: where do you find the explanation for this code? Is this a secret code? What I find as ECU error codes, there I fund nothing between P1503 and P1530.

    Bela from Ireland

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Volkswagen Master
  • 81,342 Answers

P1528 Subsidiary Throttle Valve Solenoid Circuit Malfunction
P1503 Auxillary Speed Sensor Fault
P1530 A/C Clutch Circuit Malfunction

Posted on Jun 19, 2009

  • Marvin
    Marvin Jun 19, 2009

    on the net

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vsc: err: 56 pump does not come on


This usually requires an ECU flash. Your nearest mechanic should be able to help you out with it, or if you have ECU translator to see which codes are coming up.

Jul 02, 2018 | Cars & Trucks

1 Answer

K14b ecu swift check engine light on short in ecu


the operators guide is clear. CEL on , get car serviced. (at a real ASE service shop)
or if savvy DIY person?, scan it your self.?
with a thing called a scan tool.
(barrow, beg ,rent or buy) avoid the zone.

what does SHORT mean.
lamp flashes short.
blowing fuse due to an electrical SHORT?
which fuse.

post more symptoms, the above is not clear.

Jul 29, 2015 | 2010 Suzuki Swift

1 Answer

TRUCK WONT START


the P1693 is a companion code ,not a big deal as for not starting are you getting fuel to the injectors prime your filter and try this
I'm going to point out to everyone there is NO WAY to have just a P1693 code present during error code dumping. Yes the P1693 is a companion code and has no really meaning but...

"This code indicates there is more code present in the other computer" So if the P1693 is in the P PCU that means there is more codes present in the P ECU. So if there is a P1693 in the P ECU that means there is more codes present in the P PCU. Then even in rare cases seeing the P1693 code in both computers pointing out that both computers have codes. But there is NO WAY for the P1693 to be the only codes present during error code dump. It's totally impossible!

The reason I'm posting this is because it seem like everyone is cancelling out at the first P DONE thinking its done. WRONG! There is TWO computers in the truck .

P PCU = Powertrain Controller Unit (Passenger side firewall)
P ECU = Engine Controller Unit (Driver side of engine block)

You should always see both P PCU and P ECU displayed and 2 P DONE's in the display. If you want to see a video of this and how to properly do it please reffer to my web site and watch the video I produced so you can give us acurrate information on your problems your having with your truck.As worded by my Cummins certified friend., try http://igotacummins.com/showthread.php/178-P1693-my-trucks-at-it-again-i-think-my-luck-just-ran-out site too ,

Mar 07, 2015 | Cars & Trucks

1 Answer

Ecu error code 121. p code 1693


go on line to the following sites ask about the error message.

www.ask.com
www.info.com
www.wiki.org
www.about.com

type the following : ecu error code 121.p code 1693 mean

thank you rod

Mar 04, 2015 | 2002 Dodge Ram 3500 Truck

1 Answer

How to fix a 1.9 tdci 05 vauxhall vectra with a po602 code and what is it meaning ?


Your code would be "P0602: Control Module Programming Error". Have u jump started the car or had a battery/alternator changed recently? The code sounds like the ecu has had a power spike or lost it's programming

Jun 28, 2014 | Vauxhall Vectra Cars & Trucks

1 Answer

I bought a 97 Toyota camry with a bad motor an a good motor came with it I installed it the car will nt start unless u jump the starter relay an when u put it in neutral the car dies every time u start it...


can you supply the engine numbers. engines can be the same from some years but the electrics can be of a different type 97 is on borderline when they changed the ecu and sensors. your ecu would read everything as normal but will not start. if you swap over the sensors from the old engine to the new engine it should work after this. as long as no sensor problems are on the old engine. check the part numbers and change the ones that are a different number to you old engine. there will be a few the same but most will have changed there number like cam crank and maf and prob knock sensors

Feb 12, 2014 | Cars & Trucks

1 Answer

P 1230 vectra b 1998 year i think i must find


P1230 is fuel pump fault. You need to check the fuel system instead. check fuel presure, fllter and lines then the pump itself

Sep 26, 2013 | Opel Vectra Cars & Trucks

1 Answer

What do trouble codes 14 and 24 mean


Code 14 means igniter signal to ECU missing and a code 24 means intake air temperature signal fault or your air temperature sensor is bad and needs replaced.As for the igniter i would check all of the connections and the ground going to it.If it still does'nt work replace the igniter.

Jan 11, 2012 | 1995 Toyota Corolla

1 Answer

I need the reason for the ecu error codes for a 2001 firebird 3.8L code #01 P0601,#02 P0606,#3 P1518


P0601 means your engine computer has an internal error; P0606 means that the engine computer has stored in memory exactly the running condition( much like a "black box") that the vehicle was in when the P0606 was triggered. P1518 also relates to the PCM in the matter of low voltage.

Try testing the battery as improper voltage can cause all of these codes. Otherwise it means that your PCM has failed and either needs to be reprogrammed or replaced.

Oct 31, 2010 | 2001 Pontiac Firebird

1 Answer

Have a 97 dodge ram 1500 with check engine light on . mil codes are 12 21 56 what are they ?


12,, battery feed to ecm...... low battery voltage
21,,02 senser,,,,, replace the o2 senser
56...End Of Diagnostic Mode

Jul 11, 2010 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
1997 Volkswagen Golf Logo

Related Topics:

904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Marvin
Marvin

Level 3 Expert

81294 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...