Question about 1989 Ford F 250

Open Question

How to remove headlight assembly from 1989 ford f 250

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tneubauer
  • 437 Answers

SOURCE: Broken headlight assembly

Remove the upper bolt

2f19891.jpg

Then the 3 lower ones. Then this assembly should slide out.

cf1104f.jpg

Posted on Jun 09, 2009

  • 93 Answers

SOURCE: Need to replace headlight assembly on 2005 Ford Escape

ithere are 4 bolts that hold it in...the top 2 are obvious..the others are behind the bumper. the bumper must be removed to acces them...here are the manuals instructions..

n0037234.gif
Item Part Number Description 1 — Headlamp assembly bolts (3 required) 2 — Headlamp assembly nut 3 13008 Headlamp assembly 4 14290 Electrical connectors
Removal and Installation
NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

  1. Remove the front bumper cover. For additional information, refer to Section 501-19.
  1. Remove the 3 headlamp assembly bolts.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the headlamp assembly nut and the headlamp assembly.
    • Disconnect the electrical connectors.
    • To install, tighten to 5 Nm (44 lb-in).
  1. To install, reverse the removal procedure.

Posted on Jun 10, 2009

billandrade
  • 6 Answers

SOURCE: will wheels from 1989 Ford F-250 4x4 bolt on to

Hello,
Sorry the 1989 F250 4wd wheels are not interchangeable with the 2000 F250 4WD.. The hubs where changed to a new design and (Bolt Pattern: 8 x 170MM) From 1999 to present...

Bill Andrade

Posted on Sep 22, 2009

ZX2Fast
  • 547 Answers

SOURCE: How do you remove a headlight 'assembly' (not the

You have to remove the front bumper cover. Put the car on jack stands (the front) and remove the inner fender plastic. You'll need a long extension and a 10mm socket to remove the nuts and bolts holding the bumper cover in place. Once the cover is off removal of the headlight becomes obvious.

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal of head light assy 1989 ford ranger.


Hello,

To remove the front head light please follow the steps below:
  1. Place the Ford Ranger in "Park." Turn the engine off. Turn the headlights off. Remove the key from the ignition. Allow the truck to cool for about 20 minutes.
  2. Open the hood of the vehicle. Locate the two retainer pins on the headlight assembly of the light that needs to be replaced. Pry the retainer pins open with your finger. This releases the headlight assembly from the Ranger.
  3. Pull the headlight assembly forward. Unplug the electrical connector from the back of the assembly by hand. Rotate the retaining ring counterclockwise and slide it off the plastic bulb base.
  4. Pull the burned out bulb straight out of the headlight assembly. Discard the used bulb. Insert a replacement bulb into the headlight assembly and push it straight into the socket until it clicks into place. Slide the retaining ring around the bulb and rotate it clockwise to secure it.
  5. Plug the electrical connector into the back of the unit. Slide the headlight assembly back into the Ranger. Push the retaining pins back down to secure the headlight assembly.
Hope this helped. thank You for using FixYa!!!

Jan 19, 2011 | 1989 Ford Ranger

1 Answer

1989 F 250 no dash lights, no tail lights. Have replaced 15 amp fuse even though it was not blown. Head light switch? Thanks for any input or ideas. Bob


I've had this problem twice on my Truck and it had the same exact symptoms as you do. It was the headlight switch.

Dec 21, 2010 | 1989 Ford F 250

1 Answer

I have a ford f350 and am trying to remove the old headlight assembly and replace with new one, can't seem to find out how to detach it from the truck


this for aero headlamp, plastic lens. please rate.

SECTION 417-01: Exterior Lighting 1999 F-Super Duty 250-550 Workshop Manual
REMOVAL AND INSTALLATION Lamp Assembly —Headlamp, Aerodynamic Removal
  1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
    Remove the headlamp assembly.
    1. Pull up and remove the two upper headlamp clips.
    1. Release the lower headlamp clip.
    1. Position the headlamp so the connector can be accessed.
    1. Disconnect the headlamp connector.
Installation
  1. Install the headlamp assembly.
    1. Position the headlamp assembly.
    1. Connect the headlamp connector.
    1. Install the lower headlamp clip.
    1. Install the two upper headlamp clips.
      • If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment—Photometric Aiming or Headlamp Adjustment—Screen Method Aiming in this section.
      • d1d723b.gif

Aug 09, 2010 | 1999 Ford F350 Regular Cab

1 Answer

How to remove driver side headlight on 2003 ford ranger


should have 4 screws at each corner of the light from the front.

Jan 15, 2010 | 1989 Ford F 250

1 Answer

Will wheels from 1989 Ford F-250 4x4 bolt on to 2000 Ford F-250 4x4 ? I am told that Ford changed the bolt pattern in 1999. Thanks.


Hello,
Sorry the 1989 F250 4wd wheels are not interchangeable with the 2000 F250 4WD.. The hubs where changed to a new design and (Bolt Pattern: 8 x 170MM) From 1999 to present...

Bill Andrade

Sep 22, 2009 | 1989 Ford F 250

1 Answer

Headlight lens removal


1997 F-250/350/Super Duty Headlamp Assembly Removal
  1. Remove two screws and two nuts retaining headlamp door (13064).
  1. Pull headlamp door from vehicle. Remove three bulbs and sockets.
  1. Disconnect engine control sensor wiring (12A581) from headlamp bulb (13007).
  1. Remove two retainers attaching upper two attachments of headlamp (13008).
  1. Turn horizontal headlamp adjusting screw (13032) completely out of the adjusting nut.
  1. Pull headlamp from vehicle

Jul 18, 2009 | 1995 Ford F250

2 Answers

Headlight lens removal


Open hood and look at top back of the assembly and you will see 2 clips. Pull them up and remove,then release the lower clip and pull assembly out.

Apr 08, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

1989 F-250 Headlights wont come on


pull the headlight switch out and check for a burnt connector, if the connector is heat damaged replace it and the headlight switch, the repair connectors are avail from your local dealer.

Mar 31, 2009 | 1989 Ford F 250

1 Answer

Headlights


Under the hood, on the back of headlight you will find a electrical plug. That plug can be taken and turned about 90° counter clockwise and poped out. It holds the actual bulb for the headlight, which you just pull out and push in the new one. Push the connector back into the headlight assembly and twist it back to lock it in. There may not be much room, so small hands are a plus.

Oct 20, 2008 | 1989 Ford Ranger

1 Answer

F 250 is dead


Check for the Gounding Lug on the engine Block being loose or dirty,most Fords have a central location for all their Gounds to be going to. Also Check that Fuse pael has not come loose and seperated as they are bolted together

Aug 06, 2008 | 1989 Ford F 250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...