Question about 2003 Pontiac Vibe

Open Question

1.8 liter dohc serpentine belt routing on 2003 pontiac vibe

Serpentine belt routing diagram

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
geraldo14200
  • 48 Answers

SOURCE: Serpentine belt diagram for

Usually and on most cars there's a belt diagram on the inside of the engine compartment near the radiator housing

Posted on Apr 04, 2009

Ad
michigan man
  • 3533 Answers

SOURCE: 97 pontiac sunfire 2.2 liter serpentine routing diagram needed

this is normally located under the hood next to the hood release lever if it is missing from yours then try www.autozone.com or go to your local Pontiac dealership in the parts department or an auto parts store like Napa or Autozone

Posted on Apr 26, 2009

KCGTODAD
  • 169 Answers

SOURCE: replacing the serpentine belt on a 2003 pontiac

Hello! Here you go.


a61d047.gif



Hope this helps!

Posted on Sep 25, 2009

  • 2448 Answers

SOURCE: 2006 Pontiac Vibe need serpentine belt routing

THIS SHOUD BE ON A DECAL SOME WHERE T UNDER THE HOOD IF NOT GO TO YOUR LOCAL PARTS STORE

Posted on Oct 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing for 2001 Sebring 2.4 engine


Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

Jul 31, 2016 | Cars & Trucks

1 Answer

2003 ford taurus serpentine belt route 3.0 ohc


There was a dual overhead cam so I'm guessing that's the engine you are talking about The other 3.0 liter engine wasn't an overhead cam engine. I went on to be on the safe side and provided belt diagrams for both engines because they were different. The first picture and description of which pulley is which is for the DOHC 3.0L engine which is what I'm guessing you have. The second set of pictures/descriptions is for the other 3.0L engine. Hope this helps....

2_9_2013_5_17_32_am.jpg2_9_2013_5_17_53_am.jpg2_9_2013_5_18_23_am.jpg2_9_2013_5_18_46_am.jpg

Feb 09, 2013 | Ford Taurus Cars & Trucks

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    1 Answer

    2006 Pontiac Vibe need serpentine belt routing diagram


    THIS SHOUD BE ON A DECAL SOME WHERE T UNDER THE HOOD IF NOT GO TO YOUR LOCAL PARTS STORE

    Oct 10, 2010 | 2006 Pontiac Vibe

    2 Answers

    Trailblazer serpentine belt diagram


    Hi, first, keep this diagram around as you will need it to route the serpentine belt when you reinstall it. There may also be a diagram under the hood by the radiator.
    7e98dff.jpg Next, follow this link and watch the video that shows you how to replace a serpentine belt...
    http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/
    Take care

    Aug 03, 2010 | 2002 Chevrolet TrailBlazer

    1 Answer

    97 pontiac sunfire 2.2 liter serpentine routing diagram needed


    this is normally located under the hood next to the hood release lever if it is missing from yours then try www.autozone.com or go to your local Pontiac dealership in the parts department or an auto parts store like Napa or Autozone

    Apr 26, 2009 | Pontiac Sunfire Cars & Trucks

    5 Answers

    Serpentine belt replacement


    2.0L Engines
    See Figures 11, 12 and 13
    The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
    Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
    The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
    0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

    Jul 24, 2008 | 1999 Ford Escort

    Not finding what you are looking for?
    2003 Pontiac Vibe Logo

    Related Topics:

    57 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pontiac Experts

    yadayada
    yadayada

    Level 3 Expert

    77499 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22306 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8825 Answers

    Are you a Pontiac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...