Question about 2003 Chevrolet Cavalier

Open Question

Crankshaft pulley wobbles - 2003 Chevrolet Cavalier

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 462 Answers

SOURCE: crankshaft pulley wobbles

TAKE THE BELT OFF OF IT AND SEE IF IT WOBBLES EXCESSIVELY. IF IT DON'T YOUR OK. IF IT DOES YOU WILL HAVE TO REPLACE IT.

Posted on Jul 14, 2009

  • 188 Answers

SOURCE: how do I tighten the vibration dampening pulley on

Using a air impact gun would be quick and simple. Check the pulley, sometimes the rubber seperates from the actual pulley. Crankshft pulleys usually don`t walk off. I think it seperated. Have your service shop take alook..

Posted on Feb 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could cause my crankshaft pulley to wobble if it just has the 1 bolt in the center of it holding it in


Year/make/model?? Check to see if bolt is loose. Some crank pulleys have a rubber insert that can seperate causing a wobble.

Mar 09, 2016 | Cars & Trucks

1 Answer

What could cause my crankshaft pulley to wobble on my v10 dodge 3500


Loose or missing attaching bolts. The bolt holding the pulley and the harmonic balancer to the crankshaft may be loose too.

Mar 09, 2016 | Dodge Cars & Trucks

1 Answer

Crankshaft Pulley wobbles on 1997 ford aspire


make sure the pulley bolt is tight then check the pulley for being bent. if these 2 things are good then you may have a bent crankshaft at the pulley end or worn crank bearing causing it to wobble.

Mar 01, 2015 | Ford Cars & Trucks

1 Answer

Pulley wobble on front of 1991 Mazda MX5 Miata engine with short nose crank


Hello, Unless Mazda forges the pulley onto the crankshaft, the pulley is usually a separate piece. You do not know which piece is bent and there may be a possibility that the pulley is coming loose attributing to the wobble.

Clearance is a big issue in working on these transverse mounted motors. You may possibly be able to get a socket on the crankshaft bolt to tighten it. Its a guess on whether there is enough room to switch the crankshaft pulley without dropping the engine cradle out of the body.

I can not say whether the crank bolt is a left or right handed thread. But with a little more research you may be able to find out. Use the Web Browser for a specific part search.

A site called Car-parts.com is a Salvage network which links Salvage yards across the U.S. They have good contact info, price comparisions, and sometimes photos.

Jul 03, 2012 | Cars & Trucks

1 Answer

Loud rattling sound top of engine near or below the alternator when idling, goes away if accelerator is pressed


Hello: Remove the serpentine belt, see if the waterpump pulley wobbles/makes noise when you spin it. If thats not it then start the engine, belt still off see if noise is there also while engine is running see if vthe crankshaft pulley wobbles. Also check the A/C compressor pulley (engine off, belt off) spin it by hand and check for noise and wobble. If all the previous is ok then it could be the balance shaft front bearing and or the timing chain.

Oct 18, 2011 | 1998 Buick LeSabre

2 Answers

Discernable wobble/ vibration at crankshaft pulley? I can see small pieces of rubber like material sticking out, and it starts to smoke/smell as well as vibrate. Is this the correct name for this part? And...


Harmonic balancer, Yes, but the original may need to be removed with a puller, after the belt is removed. The rubber is an insulator between layers, and may be failing.

Jul 06, 2011 | 2002 Nissan Sentra

1 Answer

Crankshaft pulley has the wobble not spinning in a even manner


Most likely the rubber part of the harmonic balancer has deteriorated causing the twin pulleys to separate. Tightening would not help if this is the case. A replacement would be needed.

Jul 11, 2010 | 2006 Suzuki Grand Vitara

1 Answer

Crankshaft pulley wobbled loose an alternator belt wont stay on...


dear friend-as this crankshaft pulley is cast iron it is impossible that it could be bent so you will have to remove it and look for damage inside the pulley and on the crankshaft,if this is not repaired the fanbelt will never stay on.

Jul 18, 2009 | 1991 Hyundai Sonata

Not finding what you are looking for?
2003 Chevrolet Cavalier Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...