Question about 2006 Ford Mondeo 1.8

Open Question

P132b fault code on 2006 mondeo tdci

Glow plug light flashing and car goes into limp mode. fault clears by turning ignition off and back on.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: mondeo tdci

hi there, you will need a diagnostic check carried out to locate the exact fault, most garages have the equipment to carry out these checks so you won't need to visit your ford agent, a common fault on the engines is the camshaft sensor these cost around £20 and are very easy to replace, however once you have it tested you will now your exact fault, hope this helps

Posted on Oct 24, 2008

peterrance19
  • 399 Answers

SOURCE: i have a problem on my mondeo st tdci withthe

hi check your coil first if this faulty it can cause all these problems please rate this answer good luck

Posted on Nov 20, 2009

  • 1 Answer

SOURCE: diesel mondeo glow plug indicator keeps flashing when driven

Hi Shaunbarry, Have you been able to fix the problem changing the EGR valve?

Posted on Dec 27, 2009

  • 504 Answers

SOURCE: hi i have ford mondeo

check engine on scanner for fault code

Posted on Mar 10, 2011

matt_sams
  • 124 Answers

SOURCE: mondeo engine goes into limp mode when driving

I would check and change fuel filter first.

Posted on Jun 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Glow plug light flashing


did you use the interface to cancel limp mode
you know its in limp mode

what was the printout of the diag

its aok to post i have a problem and this is the issues
but in limp mode you have no choice but too use software too fix the ecu etc to reset the mode fault etc

i think its the cold start system with air has an issue

if the glow plug light is flashing and the glow plugs are ok then its a sensor problem and a needed reset of the mcu to clear the error and retest...

from cold...!!

warm engine is prob aok
something air related

Apr 25, 2015 | 2005 Jaguar X-Type

1 Answer

Ford mondeo faults


the flashing orange light is the glowplug light that telling you there is a engine managment problem. you need to get the fault code out of the engine control module with a obd code reader to determine the cause but the common cause of the flashing glow plug warning is a air leak after the turbo charger

Jun 04, 2017 | 2006 Ford Mondeo 1.8

1 Answer

Ford mondeo faults


Get the codes read.it will tell you whats wrong. That is why it is on.

Jun 04, 2017 | 2006 Ford Mondeo 1.8

1 Answer

Ford Mondeo tdci fault code says speed sensor causing loss of power?


replace the speed sensor and rerun the fault codes as this unit may be restricting the engine operation and put it in limp mode.

Apr 12, 2014 | 2004 Ford GT

1 Answer

Engine managment light flashes (glow plugs light)


the car is going into limp mode due to an engine management fault. have to check what the fault is with a code reader. if the milage is high 100,000+ could be a turbo fault (overboosting), as this will put the car into limp mode.

Feb 21, 2010 | 2005 Volkswagen Passat

1 Answer

Glowplug light


Hi ,
You need to have the fault codes read,this will point you in the right direction,the revs die as it is going into limp home mode to protect itself,by turning the ignition off and then on you reset the ecu untill it detects the fault again.

Jul 13, 2009 | 2000 Ford Focus

1 Answer

Mondeo diesal 2002, glow plug light


Hi

The glow plug coming on on the Diesel Mondeo is an engine management fault indicator. The car goes into "limp mode" when this happens or in other words safety mode is triggered. This explains your loss of power.

To find the cause of this light coming on - the car will have to go on an OBD scanner at a service shop which will read the codes stored in the cars computer and give you an answer as to what is causing the fault to show.

Hope this helps - please remember to rate my answer as ratings are important to me as an expert on the site. Thank You.

Jul 13, 2009 | 2000 Ford Focus

1 Answer

Mondeo tdci


hi there, you will need a diagnostic check carried out to locate the exact fault, most garages have the equipment to carry out these checks so you won't need to visit your ford agent, a common fault on the engines is the camshaft sensor these cost around £20 and are very easy to replace, however once you have it tested you will now your exact fault, hope this helps

Oct 23, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2006 Ford Mondeo 1.8 Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...