Question about 2005 Fiat Stilo

Open Question

Fiat selespeed selespeed gearbox keeps going into neutral from most gears

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: selespeed gearbox

Check that you have oil in the gearbox and that the drive shfts are securely fitted in the box. If all this is ok, then a reconditiond, second hand or new replacement box is the order of the day. Before you buy another box, when the box is off the engine, dismantle the clutch and inspect it. It may be the preasure plate is breaking up. Anyway it is only another ten minutes on the job. If you find wear in the clutch, repace it at the same time as you change the box. Sorry for the bad news.

Posted on Nov 29, 2008

Ad
  • 7 Answers

SOURCE: 52 plate fiat stilo abarth 2.4 selespeed gear box fult

CLUTCH SLAVE CYLINDER OR MASTER CYLINDER AS FAILED

Posted on Dec 18, 2008

  • 184 Answers

SOURCE: can only go forward when red gearbox light come on dash

i know these have a common problem with the spindles from the gearbox locating into flyheel for corroding badly and seizing up sounds if you need new spindle to solve this problem also think you are catching it a early stage suggest getting this looked at.

Posted on Mar 08, 2009

alicantecoli
  • 22246 Answers

SOURCE: how do the gear box

they just push on

Posted on Sep 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Selespeed gearbox


When was the transmission last serviced it may be the oil is low or old causeing it not to select gear straight away or it could be the bands inside the box may be worn i would try the service first before jumping into worn bands
hope this helps good luck

Jan 15, 2014 | Fiat Cars & Trucks

1 Answer

Fiat stilo abarth 2.4 semi-automatic gearbox what type of clutch fluid is used


The clutch in the Fiat stilo abarth selespeed uses the same fluid as the braking system. Just find the container in the engine bay with the braking fluid. And top up with ''DOT 4 Brake & Clutch Fluid'' Note it's not the oild for the Gearbox or selespeed. You should never touch the container that holds the fluid for the Selespeed.

Jan 28, 2013 | Cars & Trucks

1 Answer

Hi i have a problem with my selespeed gearbox.The light on dashboard flashing and it not going into the gear, when it parked or stoped on uphill! I has changed the oil in the gearbox, the problem persist!...


i had the same problem with mine and noticed that its not the oil,its actually the automatic gearbox fluid(red), its more than likely leaking as the injector(small metal fitting at end of tube) below the filter(big black long tube like thing that clicks over air filter) has a crack in and causes small leaks,the fluids not totally getting into the engine so it misses a gear or goes to neutral at the oddest of times(especially when you stop) new tube doesnt cost too much labour on the other hand does....

havent had a problem since

Jul 05, 2009 | 2000 Alfa Romeo 156

1 Answer

Selespeed failure code


First try to replace the gearbox oil and do transmission flush (cheapest solution). This is how to do it
http://www.fiatforum.com/ritmo-strada/42918-gearbox-repair-manual.html
http://www.fiatforum.com/ducato/62598-checking-gearbox-oil.html
If problem persists you need to have the gearbox fixed/replaced
hope that helps
Good Luck

Feb 21, 2009 | 2006 Fiat 124

2 Answers

Reverse gear fiat x1/9 doesn't go in ?


These gearboxes were notorious for failing the reverse gear. The reverse gear wears out easily and keeps popping out. You can try shifting the gearbox into 3rd gear before going into reverse. This helps align the syncros in the tranny. Of course make sure you are not moving or if you are have the clutch depressed when shifting. You can also try http://www.international-auto.com/ for parts. They may be able to help you.

Feb 08, 2009 | 2006 Fiat X1/9

3 Answers

52 plate fiat stilo abarth 2.4 selespeed gear box fult


CLUTCH SLAVE CYLINDER OR MASTER CYLINDER AS FAILED

Dec 16, 2008 | 2006 Fiat 124

1 Answer

Selespeed gearbox


Check that you have oil in the gearbox and that the drive shfts are securely fitted in the box. If all this is ok, then a reconditiond, second hand or new replacement box is the order of the day. Before you buy another box, when the box is off the engine, dismantle the clutch and inspect it. It may be the preasure plate is breaking up. Anyway it is only another ten minutes on the job. If you find wear in the clutch, repace it at the same time as you change the box. Sorry for the bad news.

Sep 15, 2008 | 2006 Fiat 124

2 Answers

Transmission/gearbox


hi have a 2000 2l 156 selespeed problem with gearbox is light comes on dash and gears won't select have replaced the gearbox pump at great expense but has now stopped working again can any one advise if this could be other issue

Aug 03, 2008 | 2000 Alfa Romeo 156

Not finding what you are looking for?
2005 Fiat Stilo Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...