Question about 2000 Chevrolet Blazer
How many relays for ac compressor
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Fuel Pressure Relay location
Hello, There is no fuel pressure relay. If you mean fuel pump relay, you can find this by opening hood, look towards driver's area, on the firewall just below the cowl vents you should see a relay with 5 wires going to it.
Posted on Feb 09, 2009
There is no release, you just pull up on the relay with a little bit of rocking back and forth. You can use a pair of pliers to get a better grip, but be very gentle and do not crack or warp the relay cover, they are very brittle.
Good luck, let me know.
Posted on Apr 24, 2009
SOURCE: No power for AC compressor
try removing the plug off the low pressure switch on the accumalator plug a paper clip into the plug and turn ac on if it comes on then your low pressure switch is bad or your low on refigerant.
Posted on May 28, 2009
On 95-97 and 1998, both the turn signal and hazard flashers are located behind the lower dashboard trim just to the left of the cigarette lighter. You can not get to it without taking apart the trim (stupid design). Or you have to drill a 2" diameter hole in the trim with a velcro cover so you would never have to do it again1999 and later it is under the glove compartment
to disassemble it without drilling
It's behind the panel to the left of the cigarrette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size. First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom. The panels overlap, so be prepared for a lot of unscrewing. You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw. Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Autozone, and DON'T get the $184 Flasher switch, all you need is the signal flasher. It's shaped like a cylinder with TWO prongs on it.
Posted on Nov 03, 2009
Tips for a great answer:
Apr 23, 2014 | 1998 Cadillac DeVille
Sep 22, 2011 | 1993 Chevrolet S-10 Blazer
Aug 09, 2010 | 1996 Chevrolet Blazer
Jul 29, 2010 | 1997 Chevrolet Blazer
Apr 08, 2010 | 1986 Chevrolet S-10 Blazer
Jun 19, 2009 | 2000 Chevrolet S-10
Feb 09, 2009 | 1993 Chevrolet S-10 Blazer
30 people viewed this question
Usually answered in minutes!