Question about 1999 Dodge Ram 2500 4WD
Control knob will not come off for power mirror on 1999 Dodge Ram 250.
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
very easy take the mirror inside cap off if you can not get to the 3 bolts then you will have to take trim panel off to take trim panel off look for plastic caps take them out and unscrew them then pop out the bottom of the door and pop the sides out then lift up and out should be loose enough for the bolts now/ 10mm bolts 3 Please rate my response thank you very much
Posted on Feb 02, 2009
The controls for fan speed, temp and air flow are contained in a self-contained control module attached to the center dash. To get to the lights, you have to remove the center dash unit (refer to the 1st diagram for removal). Once the center dash is removed, turn it over and you will see three bulbs (you will actually see the base of the bulbs--refer to the 2nd attachment for illustration).
Simply remove the bulbs with a narrow blade, flat screwdriver. The Mopar Part Number for the bulbs is: 50138115AA. I paid about $2.25 for each bulb. Let me know if you need more info.
Posted on Mar 05, 2009
I recently had the same issue, but my airbag warning lights also turned on. If this is the case, it might be the clockspring. There is a recall on clocksprings for Caravans 1998 - 2000 I believe. I got it replaced for free in the dealership. Enter your VIN in this site and it will tell you if you are covered in the free replacement warranty.
Hope this helps.
Posted on Mar 06, 2009
SOURCE: power windows
THERE IS A WINDOW LOCK BUTTON ON THE DRIVER WINDOW SWITCH PANEL. IF THIS IS PRESSED ONCE IT SHOULD ALLOW THE OTHER PASSENGER SWITCHES TO OPERATE. IF IT WON'T ALLOW THE PASS. BUTTONS TO WORK THEN THE LOCKOUT BUTTON MUST BE DEFECTIVE. HOPE THIS HELPS YOU. KEEP ME POSTED PLEASE. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK
Posted on May 18, 2009
Tips for a great answer:
Feb 23, 2014 | 2004 Dodge Ram 2500
Jun 20, 2017 | 1999 Dodge Ram
Sep 14, 2010 | 1993 Dodge Ram 250
Feb 27, 2010 | 1999 Dodge Ram
Feb 15, 2010 | 1992 Dodge Ram 250
Jun 12, 2009 | 1998 Dodge Ram
May 24, 2009 | 1998 Dodge Ram 1500 4WD
Dec 28, 2008 | 2004 Dodge Ram 1500
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: