Question about 2011 Chevrolet Traverse

Open Question

Low beams don't come on but high beams do

I've replaced the bulbs checked the fuses and there not burnt out. Don't know where to go from here

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 98 caviler low beam

98 caviler high beam left side dosent work canged bulb checked fuse and all good

Posted on Feb 15, 2010

Ad
ryanlutton
  • 1131 Answers

SOURCE: Our low beam lights just

Switch relay #45 with relay #46 in the fuse box under the hood. Do you now have lights? If so, replace the relay. Very common problem.

Posted on Jun 05, 2011

  • 1243 Answers

SOURCE: Both Low beam headlights aren't working in my 2002

my suggestion is that you check/ replacr the HDM(headlight driver module) relay in the main fuse box located under the hood near the battery.

Posted on Jul 30, 2011

cautionflag1
  • 116 Answers

SOURCE: i got a 2004 chevy

If it is anything like my 04 GMC Sierra, there is a relay panel under the hood. In that underhood box where you found the fuses, there are also relays. They pop out (the diagram is on the lid of the box). After the GMC hit 200k, the relays started going out. The high beams are on a relay, the lowbeams are on a different one. You can pop one out and replace it with the horn or foglight relay if you want to check it out. I am betting that the DRL bulb just happened to go at the same time. Mine go out regularly..I would say around every 10-15k miles. I don't know if this helps, it is just something that I have run across with a similar vehicle.

Posted on Aug 16, 2011

  • 4044 Answers

SOURCE: high beam headlights don't work, changed the bulbs, and checked the fuses, help

This is going to be a problem with your light switch or dimmer switch. Replace the light switch and see if that resolves the issue.

Posted on Nov 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 mazda 6 low beams don't work but high beams do


its probably the switch inside on the steering column check fuses first

Mar 20, 2013 | Cars & Trucks

1 Answer

Low beam headlight drivers side don`t work. high beam it works.


Check tour bulbs first and replace if blown. If OK then check wiring backwards from light to dip switch.

Oct 05, 2012 | 1996 Ford Explorer

1 Answer

Is there any fuses or relays that are not in the fuse box on a 2002 buick rendezvousfor the bright lights


The high and low beam lights use the same power source, so if the low beams work the high beams have power.
There is a low and high beam relay controlled by the dimmer switch.
If the low beams work and the high beams don't, and the bulbs are good, check the dimmer switch and the high beam relay.

Aug 04, 2012 | Buick Rendezvous Cars & Trucks

1 Answer

The low-beam headlights don't work. The fuses are fine as I replaced them with those of the high-beams and the high-beams worked. Other than both bulbs burning out at the same time what else could be...


Possibly the bulbs. Take a look at them; they have 2 coils per bulb, one for the low beam and one for the high beam. So it is possible that the more used low beam burns out before the lesser used high beam.

Aug 19, 2011 | 2000 Chrysler 300M

1 Answer

The low beams of my 2006 pontiac grand prix don't work only high beams work


mdsarnes, The first thing that I would check is the fuse for the low beams located in the engine compartment power distribution box. (Fuse box) GM does have a legend written right on the cover so you know which fuse to check. Also, when the low beams are on try and wiggle the connectors to each bulb. If these dont work, replace one bulb and see if it works. If it does then take the same bulb and try it on the other side. If you have a test light then you can test for power at the plugs before you purchase any bulbs. Good luck with this.

May 22, 2011 | 2006 Pontiac Grand Prix

1 Answer

High beams work low beams do not


you don`t say if you have checked the fuses for the headlights.if the fuses are okay and you know that the low beam filaments are working.you may have to feed power and ground directly to the proper headlight prongs from the battery to make sure the bulbs are good.then it could be a relay for the low beams or a switch for the headlights.you don`t say if you have daytime running lights on this car as there is a module for this system that may be the problem for the now low beams.

Mar 28, 2011 | 2006 Chrysler PT Cruiser

3 Answers

Low beam head lights not working - The low beams, both stopped working. The high beams work fine. I checked the fuses and all 4 are good. I even swapped the low and high beam fises just in case. No...


if the fuses are good then you need to check for power and ground at the headlight plug that attaches to the headlight bulb if you have a good power and ground there and the connections are good then the bulbs are both no good.or if you can tell the bulbs are burnt out by looking at them then you don`t have to check powers and grounds.you also can directly feed power and ground to the bulb and check both the terminals for high beam and low beam as you cannot tell which is which by looking at the terminals

Mar 04, 2011 | 2001 Ford Focus

2 Answers

98 volvo S70 low beam bulb replaced still no light


Easiest way would be to go back to where you bought it and make sure the bulb is installed that you bought....and show them. Ask if you can get a new bulb and change it in front of him. Call the dealership and talk to parts, ask if, indeed the hi and lo are interchangeable.

Mar 12, 2009 | 1998 Volvo S70

Not finding what you are looking for?
2011 Chevrolet Traverse Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...