Question about 2005 Dodge Stratus

2 Answers

Won't start I changed the crank and cam sensors but my truck still won't start what else could it be there is no spark

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

Have you tested the ignition moduls?

Posted on Apr 20, 2014

Testimonial: "Well that's what I am left to check I was hoping it was something else for why it won't turn over"

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Dodge Master
  • 354 Answers

What makes you certain it is secondary ignition related and not fuel or compression?

Posted on Apr 20, 2014

Testimonial: "Because my fuel pump is bran new and my motor was running perfectly fine and just died at the stop light so how can it be compression"

  • 1 more comment 
  • KrazyKyngeKorny Apr 20, 2014

    >What makes you certain it is secondary ignition related and not fuel or compression?<

  • KrazyKyngeKorny Apr 20, 2014

    >What makes you certain it is secondary ignition related and not fuel or compression?<

  • KrazyKyngeKorny Apr 20, 2014

    Add a CommentI'm not. Are you certain it isn't? I said test it. You want her to bring it to you, without testing, so you can charge for testing an auto parts will test for free.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 100 Answers

SOURCE: i have an 02 dodge ram 1500 4x4 it started

You probably have a bad ignition coil. Which engine is in this truck? 3.7, 4.7, 5.7 or hemi

Posted on Jan 07, 2011

  • 2 Answers

SOURCE: no start, no spark, no cam reference signal at

crankshaft sensor had same problem

Posted on Apr 02, 2010

  • 155 Answers

SOURCE: sputtered & died

this happened to me on my 1999 dodge ram and it ended up being the fuel pump

Posted on Apr 08, 2010

dragonstaff
  • 31 Answers

SOURCE: Okay the next morning after changing battery cable

Your friend has probably blown a fusible link ( usually in the low-tension (thin) wires from the battery close to the terminal)

Posted on Aug 01, 2011

  • 1207 Answers

SOURCE: I have a 1992 dodge dakota, won't start,no power to coil or engine light

do you check the battery???
_________
FGTech Galletto 2-Master

Posted on Sep 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 v8 1998 dodge truck won't start


well if ur not getting spark and u changed all of the ignition components lets think about the computer in order for the ignition to work you have crankshaft position sensor that fires the fuel injectors and the spark change that and if still nothing then change the camshaft postion sensor that sensor tells the computer that the 1 piston has came all the way up and it tells the crankshaft sensor to do its thing

Feb 21, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

My 1996 F450 7.3 diesel engine crank over but won't start, I have change the cam sensor, but still doesn't start


First, check the condition and operation of the following:

1) Spark plugs, leads and coil(s)
2) Air filter
3) Fuel filter and pump operation.

Nov 18, 2012 | Ford Cars & Trucks

2 Answers

My 2000 honda civic wont turn over and has no spark but the ignition coil and modual are both fine


Won't turn over? Do you mean the starter won't crank the engine over?

Or the engine cranks over and won't start, and you have tested for spark when cranking and have no spark? And then you have tested the coil and ignition module, and they tested out good? Am I on the right page here? If so, maybe the next thing to check would be the crank position sensor. The ecu (computer) signals the ignitor (ignition module) when to initiate spark after it digests the signals from the crank position sensor and the cam position sensor.

Nov 04, 2012 | 2000 Honda Civic

1 Answer

2002 sebring won't start


crank shaft position sensor

Sep 23, 2012 | 2003 Lexus LS 430

1 Answer

2000 sable won't start. Battery good, gets fuel, tries to start, but won't fire.


Does the vehicle gets spark? if yes check with scanner whether is there any problem with crank or cam sensor failure.

Sep 16, 2012 | 2000 Mercury Sable

1 Answer

1992 mx-3 v6 won't start. will hit sparaticly as if about to start but just won't catch. checked crank pos. sensor. need suggestions on how to proceed.


Check for a blue snapping spark on 2 or 3 plug wires(or all of them). If you get good spark, then ignition is likely not the problem. A weak or sporadic spark could be a bad coil or coil pack, or a bad ignition module (the ignitor).Check the coils with a volt-ohmmeter per the specs for your car. The ignitor can be tested at a parts store.
If spark is good, check fuel filter, fuel pressure, check timing marks on crank pulley and cam marks, Try a little starting fluid in the air intake and see if it runs for a moment. If so, then it's likely a fuel delivery problem. If no change, then it's likely an ignition circuit problem.
Good luck.

Dec 30, 2011 | 1992 Mazda MX-3

1 Answer

My 91 eagle talon won't get a spark it just cranks


try crank position sensor.cam sensors are mostly for monitoring misfires. cam sensor doesnt determine spark timing

Dec 17, 2011 | 1991 Eagle Talon

1 Answer

It cranks but it won't start. I got a new battery, cam position senor and crank position sensor. took out the ignition control was told that was still good.


Check for spark at the plug wires to spark plugs, no spark on anything, then suspect a fouled job replacing the cam position sensor.

Oct 03, 2011 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

What is wrong with my explorer if it cranks but won't go? I can crank it and when going down the highway it won't accel I can push the accelerator all the way down and it won't accelerate....


check plug wires and coil all spark in all plugs should be blue spark no orange spark if any orange replace coil i have a 2003 explorer so i know if that dont sove anything try a crankshaft postion sensor and or cam postion sensor as they tell cars ecu when to fire spark and what cylider to fire it to lmk what happens we can go from there


if it helps i would love a thumb up review

May 08, 2011 | 2002 Ford Explorer

Not finding what you are looking for?
2005 Dodge Stratus Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...