Question about 2006 Chrysler Pacifica

1 Answer

Feels like I'm being held back

When I put the car in drive the car does not move, when I give it gas it feels like it's hesitating. Once it goes past 10 miles it feels like whatever was holding it back just let go and it runs fine. And when I put it in reverse I feel the same thing something is holding back the car

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 128 Answers

Sounds like your brakes are sticking. Possibly the emergency brake is not disengaging entirely? Stop the car and put in park. Apply emergency brake as hard/far as possible. Then release and put in drive and try to go. Most emergency brakes are self adjusting. If the problem still persists, have it taken to your mechanic.

Posted on Apr 20, 2014

  • Juan
    Juan Apr 22, 2014

    Tried that still does it. Now once I go into 2nd gear manually it does not do the same hesitation

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2002 PT Cruiser Shifter Wont Go Into Reverse - Manual 5 speed

I had the EXACT same problem on my 01 PT. Very easy and inexpensive fix. There is a bushing that is located under the air box under the hood. It is in the shifter linkage. It falls apart from the heat of the engine and age. Mine was completely gone! The dealership didn't sell the bushing itself, they wanted to sell the whole arm for $$! I found this place that sells polyurethane bushing that work great. They sell you two, one for under the hood and one under the console. I just replaced the one under the hood.
All you have to take off is the air box, press the bushing into the sleeve then press it onto the pin and you are done. This place sells them as race parts that gives you a tighter shift.
http://www.boogerracing.com/boogerbushings.html

Posted on Sep 16, 2008

  • 1 Answer

SOURCE: P0302 Engine Code

Acroding to the codes it is a # 2 cylinder miss fire , sounds to me like there is a lot of carbon build up

Posted on Dec 06, 2008

  • 641 Answers

SOURCE: Trouble codes p0301 and p1684

It seems like P1684 is a com problem with the modules. As far as your cyl. #1 misfire try switching the coil, plug and see if the problem follows to the cyl. you swapped plug and coil with, this will help issolate the cause. Also look for oil accumulation in the plug hole, cracked coil, arcking through the plug boot.

Posted on Apr 09, 2009

  • 31 Answers

SOURCE: Engine wants to stall with A/C on or off.

its proboly is the fuel filter whic is glog

Posted on Jun 06, 2009

SOURCE: codes P0731, P1782, and P0700

It means you have some or just one sticking or defective solenoid in the trans valve body. You will need to take it in before you become stranded and or destoy the transmission. Even if the fluid was low and you had these symptoms these codes would not be related. These codes are electrical related, not pressure

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05 TrailBlazer 57,000 miles 4.2 6 cyl, bad vibration at cold startup, in idle and in drive, in reverse, smooth. Summer mornings just very slight. I live in central GA. My brother also has a TrailBlazer ...


WHEN YOU SAY THAT IT GOES AWAY IF YOU PUT IT IN REVERSE THE THERE HAS TO BE A MOUNT OR SOMETHING HITTING ON THE LEFT SIDE PUT IT ON A LIFT AND TAKE A BIG BAR AND MOVE THE MOTOR UP ON THE LEFT SIDE AND SEE IF THAT CHANGES THE FEEL CLEAN OUT THE THROTTLE PLATES AND SEE IF THAT TAKES CARE OF THE HESITATION

Oct 21, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

I have a 93 Beretta 4 cyl. When I press the aceleratior to give it gas to go it stumbles and then hesitates as the car goes faster then chokes out and dies. Once started back up it will drive several miles...


can be a few --first check fuel pressure --fuel filter,fuel pump,clean carb /vacuum lines check for cracked or disconnected line/egr valve possible carbon build up remove clean with carb cleaner/cat converter clogging when running feel exhaust if restricted possible clogging of converter

Apr 26, 2010 | 1993 Chevrolet Beretta

2 Answers

The other night I put gas in my car, about half way home the car hesitated and felt like it was going to shut off, so I gave it gas and it didn't. Now the car hesitates when I am driving. I put gas in it...


it may very well be that it is the fuel filter that is dirty, if the car bogs down when giveing it gas then it is usually the fuel filter.that needs replced or dirt could have got into injectors, put some fuel injector cleaner in tank. and change fuel filter.

Apr 14, 2010 | 1999 Toyota Camry

1 Answer

1994 Buick Skylark. Lot of hesitation and jerking, power locks


HI MY NAME IS JUAN:
I HAVE A 93 BUICK SKYLARK CUSTOM
AND I HAD THE SAME HESITATION.
I CHAGED GAS FILTER, AIR FILTER, AND USE SEA FOME IN MY GAS TANK AND USE IT ALSO TO CLEAN THE INTAKE SYSTOM, AND IT HELPED ALOT. TWO MONTHS DOWN THE LINE HADE THE SAME HESITATION AND IT WAS ONE OF THE INISION COIAL PACK WAS NOT GIVING THE ELETRICAL SPARK TO THE PLUG. I CHECK IT BY PULLING THE CABLE OFF THE SPARK PLUG WITH THE CAR RUNNING AND FOUND THE ONE THAT WAS NOT GIVING SPARK. I REPLACED THE PACK FOR THAT CILINDERS PLUG AND THE PROBLEM WAS GONE.
HOPE THIS CAN HELP YOU.

Jun 17, 2009 | Buick Skylark Cars & Trucks

1 Answer

94 buick stalls and hesitates


check fuel pump pressure.it should be 41 to 47 psi.

Apr 26, 2009 | 1994 Buick Century

2 Answers

Hesitance when pushing on the gas pedal


Is it a Twin Cam?? Does it Have a sharp miss at launch??

Mar 20, 2009 | 1995 Saturn Sl

Not finding what you are looking for?
2006 Chrysler Pacifica Logo

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...