Question about 2007 GMC Sierra 1500

1 Answer

Stabilitrack light is on

The service stabilitrack light is on. after you drive about 50 yards it will go off.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 167 Answers

This is a common occurrence for some random reason. It can be due to overheating of the wire harness, dirt on a sensor, or a couple other things too. If you do not have the factory owner's manual, you may not be aware of this. It is addressed in the owner's manual.

The good news is that the owner's manual says that unless the indicator stays lit, the problem is not really a problem requiring a trip to a mechanic, but a transient thing as a result of operating environment.

Posted on May 07, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can I reset abs light and service stabilitrack light?

Check for power and ground from the harness first. After that check continuity of the plug and wire of the sensor, After that replace the bearing. It comes with the sensor.

Mar 18, 2016 | Cars & Trucks

1 Answer

Reduced power and service stabilitrack on my 2007 equinox.

The reduced power light is most likely responsible for the stabilitrack light to illuminate as it will shut it down as a safety feature. The reduced engine power light is normally set by a defective throttle control motor. In some cases, the sensor on the gas pedal can also cause this message to display, but, in my experience, the throttle control motor is most likely the problem.

Feb 22, 2016 | Cars & Trucks

1 Answer

Service stabilitrack message

you have one of your wheel sensor wires either shorted or a bad sensor.. usually your scan will tell you which one.

Apr 13, 2014 | 2011 Chevrolet Silverado 1500

1 Answer

Stabilitrack icon comes on frequently whilte drivin, turn ignition off and itdoes not appear again. Driving the next day it likely will. Is there any harm while driving with the icon on?

Probably going to be the steering wheel position sensor. Keep track of how you park, keep wheel straight when you park will keep the light off. Most of us just live with it and park with wheels straight.

Aug 02, 2017 | 2008 Chevrolet TrailBlazer LT

1 Answer

2008 impala stabilitrak

You seem to have an issue with the traction control system and you will need a shop with the capability of accessing those modules to read them.

Aug 28, 2013 | Cars & Trucks

1 Answer

How to service stabilitrak on my 2008 chevy impala

Service stabilitrack can mean a number of things . When my 08 impala ss stabilitrack light came on it was just a spark plug that was bad

Nov 20, 2012 | Cars & Trucks

1 Answer

How to perform a traction control an stabilitrack service

traction control and stabilitrack service

Sep 23, 2010 | 2007 GMC Yukon

1 Answer

Can't resolve Indicator light for service stabilitrack & ABS..?

Ask your dealer if he has reviewed any "service bullitens" that might be related to the issue. There could be a known issue that has been published by GM that will fix the problem. There could be a field software re-flash needed for the ABS controller or one of the other electronic modules. If he is unable to find such a bulletin or information, personally, I would insist a " Field Engineer" be brought in to review the issue and get it fixed.
Typically the Field Engineer has all the current information from the factory to help resolve the issue.
Good luck and let me know what transpires.

Apr 03, 2009 | 2007 GMC Acadia SLE

3 Answers

How to reset Service 4wheel drive warning light on 2005 ChevTahoe

I have a 2005 Tahoe that recently had a similar problem. To resolve, I did the following.
  1. Change the transfer case fluid (Which you already did)
  2. Change Gears to 4L while in neutral, change back to drive, and drive slowly 50 yards or so.
  3. Change Gears to 4H while in neutral, change back to drive, and drive slowly 50 yards or so.
  4. Change Gears to 2H while in neutral, change back to drive, and drive normally for a couple of miles.
This will cycle the fluid within your transfer case, and hopefully clean out the sensor. I did this, and my Service 4WD light went away after one day of normal driving. Hope this helps. Note: When I went into 4L the first go around, it had a hard time shifting due to non use. I changed between 4H and 4L a few times until it got smoother.

Mar 23, 2009 | 2005 Chevrolet Tahoe

Not finding what you are looking for?
2007 GMC Sierra 1500 Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76846 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides