Question about 2003 Dodge Caravan

1 Answer

How do i install electrctrical portion of ignition switch for my 2003 dodge intrepid

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 752 Answers

Hi Robert, I'm glad to help. Here's how to remove and replace the Ignition Switch on your 2003 Dodge Intrepid. FIRST: remove the steering wheel shaft covers that rest over your ignition swtch. Once the covers are removed you now have access to the screws that hold the ignition switch in place. NOW: unplug the electrical connector, then take out the screws that hold it in place. NEXT: You'll need to turn the key to the proper position to release the switch while pulling the switch backward. Once its out install the new one and your done. Hope this helps and have an awesome day Robert.

Posted on Jun 13, 2014

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2920 Answers

SOURCE: dodge intrepid 2003 power steering resevior has hole in it

there are 2 bolts that hold the reserviour on the vehicle once you remove those bolts you will need to take the hoses loose they should unscrew and then you can put the new one in the bolts are at the top and bottom of the reseviour

Posted on Jan 20, 2009

  • 297 Answers

SOURCE: dodge intrepid 2002 where is the ignition switch located

Check fuses, and check to ensure the AC compressor is running while the engine runs!

Posted on Aug 15, 2009

  • 312 Answers

SOURCE: Chrysler intrepid 2003 obd 2 code P0441

Most common problem causing this code is the purge solenoid. A quick smoke test will show if you have any leaks in the system. If no leaks and the fuel cap is installed properly it's the purge solenoid.

Posted on Sep 16, 2009

  • 1244 Answers

SOURCE: axcle shaft 2003 dodge intrepid

remove tire/wheel and remove axle nut!! i thinks its a 32 mm socket and then take the upper strut bolts out of the knuckle theres 2 bolts 18mm if not there 15 mm bolt heads and tilt the knuckle outwards then drive the axle back with a hammer til it clears then take a flat tip bar and pry the axle out of the tranny

Posted on Jan 21, 2010

  • 512 Answers

SOURCE: INSTALL 2003 2.7 Dodge intrepid oil pump

You are not going to like my suggestion. Either go online and search for a maintenance manual for your vehicle and purchase it or go to a local parts store and purchase one there.

The procedure to do what you are asking is very long, many pages of typing and photos a required to accomplish what you ask and it is different for every vehicle.

You can also do a search online about doing this and you might get lucky and find a procedure already written up, but I'm betting on you needing the manual in hand to accomplish this task, even with online instructions.

Or you can pay a mechanic to do it for you and if you do not have all the tools required to pull the oil pan and even possibly the engine from the vehicle, it might be cheaper.

Good luck.

Posted on Sep 17, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dtc Code P2314

2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ... > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

Oct 29, 2015 | 2002 Dodge Intrepid

1 Answer

How do i replace an ignition switch on a 94 dodge intrepid

What is a KS6555? If it is aftermarket we don't have any info. Contact the manufacturer. You also can check youtube for a video.

Feb 28, 2015 | 1994 Dodge Intrepid

1 Answer

2003 dodge intrepid

Code 700 means you have a problem with the transmission or the control module. Code 340 is for the cam sensor for bank one.
Code 841 is for a problem with the low reverse pressure switch and that probably also set the 700 code.
Code 1776 is brand and sometimes model specific, generally speaking it is for a timing or ignition issue which could be connected with the 340 code.
I would clear the codes, drive the car, and see how many codes are reset again. Then go from there.

Jul 22, 2013 | Cars & Trucks

1 Answer

How to install an oil pressure switch on a 2003 chrysler intrepid

remove the oil filter to access the pressure switch. then get a oil pressure switch socket to remove the switch and to install the new one.

May 07, 2012 | 2003 Dodge Intrepid

3 Answers


When you removed the alarm unit you cut the line to the Starter kill switch that was installed. Remove the starter kill switch which is most likely located under the dash spliced into the ignition wiring harness.

Jul 08, 2011 | 1999 Dodge Intrepid

1 Answer

Ignation switch won't turn on, dodge 2003 intrepid

Wow your going to have to take a trip to the dealer for this one only they can help you

Apr 01, 2010 | 2003 Dodge Intrepid

1 Answer

Chrysler intrepid 2003 obd 2 code P0441

Most common problem causing this code is the purge solenoid. A quick smoke test will show if you have any leaks in the system. If no leaks and the fuel cap is installed properly it's the purge solenoid.

Sep 16, 2009 | 2003 Dodge Intrepid

1 Answer

2000 Dodge Intrepid needs new Ignition

hey all you do is go down to like napa or autozone and tell them u need the complete ignition switch and the diagram to install it and then you are set. you dont need any special tool to do this or anything.

Jan 14, 2009 | 2004 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides