Question about 2004 Dodge Ram 2500

Open Question

Error code P581 for a Dodge Ram 2004 - 2004 Dodge Ram 2500

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75797 Answers

SOURCE: error codes

Her is the definition and a list of possiable causes.


Code P1740-Torque converter clutch did not lock up when the PCM sent the command. Enabling conditions: No engine or transmissions codes are present, vehicle speed was under 70 MPH, TPS was under 33% open. When the PCM commanded the torque converter to lock, no change was detected in engine speed. Blocking action: This code can block the following monitors: none.
Testing: Check torque converter solenoid for proper operation.
P1740 TCC O/D SOL PERFORMANCE (GAS)
Theory of Operation
The Torque Converter Clutch (TCC) Solenoid is used to engage the TCC which improves fuel economy.
When Monitored
The Torque Convertor Clutch (TCC) and Overdrive Clutch (OD) will be tested each time the PCM requests TCC engagement in 3rd gear and OD.
Set Condition
The DTC will set if the expected RPM drop is not achieved while attempting to engage TCC or OD. This indicates a malfunctioning torque convertor or overdrive clutch.
Possible Causes
* ENGINE DTCS PRESENT
* TRANSMISSION DTCS PRESENT
* TRANSMISSION TEMPERATURE TOO COLD
* OIL PAN CONTAINS EXCESSIVE DEBRIS
* 3-4 SHIFT SOLENOID
* SHAFT OR SEAL DAMAGE
* TCC SOLENOID
* TORQUE CONVERTER

Posted on Sep 25, 2008

  • 83 Answers

SOURCE: error code c 00 00

DTC C0000 Vehicle Speed Information Circuit, I hope that helps. Link to 2004 Dodge Ram Service Manual

Posted on Sep 27, 2009

wireguy212
  • 1627 Answers

SOURCE: ecu 2098 1500 ram

You need to replace the o2 senser that comes off the rihgt side of the truck.

Posted on Nov 01, 2009

  • 33 Answers

SOURCE: Dodge Ram 3500 Diesal 2004 keeps throwing code

contact your dealer service department with the code and they should have no problem hooking you up with the problem

Posted on Dec 29, 2009

kapishtech
  • 2272 Answers

SOURCE: 2004 Dodge Ram 1500 error

P0442 & P0456= Evaporative Emission Control System Leak Detected (small leak)

Basically this code means that the Powertrain Control Module (PCM) has recorded an event where the fuel tank could not be negatively pressurized (vacuum).

This could be caused by refueling with the engine on, or this vehicle has a leak in the evaporative fuel system. On Dodge trucks the first suspect is usually the fuel cap is either not tighten correctly to 1/4 turn, or defective.
Those codes are for the EVAP system, the 442 & 456 is a medium leak, check
the gas cap. Check all of your EVAP lines and the charcoal canister. Also check the lines and overflow line from the gas cap to the gas tank. check the inlet hose on the purge selenoid, if you find little black grains of sand (charcoal) the evaporative canister has failed, and it will have to be replaced. You may also have to clean out the selenoid by taking it off and tapping it to get the charcoal out so it will work properly. obviously it will also have to be replaced if you can't get all of the charcoal out.------------

Thanks. keep updated for any more query.you can rate this solution and show your appreciation.

Posted on Sep 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the PO 441 code on a 2004 dodge ram 1500 5.7 automatic 4x4


P0441 is a "purge flow error" which can be a result of a small leak or some other problem with the hoses to the canister. Here is a good reference site for more info: http://motorage.search-autoparts.com/motorage/data/articlestandard/motorage/102005/149558/article.pdf

Dec 17, 2010 | 2004 Dodge Ram 1500

1 Answer

Dodge Ram 3500 Diesal 2004 keeps throwing code


contact your dealer service department with the code and they should have no problem hooking you up with the problem

Dec 29, 2009 | 2004 Dodge Ram 3500 Truck

1 Answer

2004 Dodge Ram Diesel. Check engine light comes


You will need to have a diagnostic test on this vehicle which will then provide you some error codes.Then once you get the error code you can start looking where the fault is.Hope this helps.

Dec 08, 2009 | 2004 Dodge Ram 2500

1 Answer

Ecu 2098 1500 ram


You need to replace the o2 senser that comes off the rihgt side of the truck.

Nov 01, 2009 | 2004 Dodge Ram 1500

1 Answer

What is the most common cause of an error code: 0040 and 0041 in a 2003 dodge ram 1500?


no such codes, it would be something like a po 441 or po 045. recheck your codes,good luck.

Oct 28, 2009 | 2004 Dodge Ram 1500

1 Answer

Error code c 00 00


DTC C0000 Vehicle Speed Information Circuit, I hope that helps. Link to 2004 Dodge Ram Service Manual

Sep 25, 2009 | 2004 Dodge Ram 2500

1 Answer

Knock Sensor location on a 2004 Dodge ram 1500 5.7 hemi


2 knock sensors are used..small black plastic sensor bolted into engine block below each exhaust manifold..be careful not to over torque bolts upon installation

Feb 24, 2009 | 2003 Chrysler PT Cruiser

2 Answers

04 Dodge Ram 1500 Hemi 2WD O2 Seneor


change up and down stream o2 senors

Dec 15, 2008 | 2004 Dodge Ram 1500

3 Answers

2004 DODGE RAM 2500 DESIEL


the transfer pump is going bad ...dodge has an intank replacement for your vehicle

Nov 11, 2008 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...