Question about Ford F-250

Open Question

Orange rectangle on trip a dash display

I can't get display to clear from dash.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the main relay in a 1992 Honda accord


Remove the dash cover under the steering column and look up it is a rectangle shaped, orange color.

Oct 05, 2014 | 1992 Honda Accord

Tip

2008 Highlander Maint Req'd reset proceedure


This is the reset proceedure for a 2008 Highlander with a key-type ignition:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

on Nov 17, 2008 | 2008 Toyota Highlander

1 Answer

Reset maintenance light


Try this...
Turn the key to the 'on' position.

Press the trip button meter until it displays the "Trip A" odometer.

Turn they key to the off position.

Then while holding the trip meter down, turn the key to the 'on' position. 4 blinking dashes will display and they will count down.

When the last dash disappears 000000 is displayed to indicate the maintenance counter has been reset.

May 14, 2014 | 2005 Toyota RAV4

1 Answer

Have a 90 series prado and a broken belt on the alternator the batt light is no charge but what is the warning light bottom left of dash orange arrow passing through rectangle with dots is that relate


My solution is it is indicating that the water pump is driven by the same belt and there is no water being pumped around your engine
Good luck LennyG

Dec 26, 2012 | Cars & Trucks

1 Answer

How to reset trip meter to zero for every journey on jaguar s type and also where the button to reset is please?


The two buttons that control the trip options are on the dash adjacent to the hazard warning button. Press the TRIP button untill it shows a small A or B in the top left (say average mpg) then press the upper part of the toggle switch marked RESET/CLEAR and hold it for about four seconds, this will display A or " B resetting" depending on which trip you are currently in, then everything on that trip is reset to zero (mileage/mpg/ave.speed etc). I use A for the full tank recording and B for individual journeys that I wish to record.

Jul 21, 2011 | 2000 Jaguar S-Type

2 Answers

Hi, how do i put off ''maintenance required'' sign on my toyota camry 2007 car dashboard?Just did the servicing, the sign is still there?


with the key in the off position press and hold the odometer trip reset button on the dash. Turn the key to the run position while continueing to hold the reset button, do not start the car. The odemeter display should change to all dashes and then the dashes will start to go off one at a time. Once they are all out the odometer will display all zeros and then return to its normal display. Sometimes the trip A odometer needs to be displayed before starting and sometimes the trip B.

Your owners manual will give you some more insight if needed.

Sep 29, 2010 | 2007 Toyota Camry

1 Answer

Clearing service message on dash


Turn the ignition to position 1 Push and hold trip reset while holding. Turn to position 2 hold trip reset till the service light flashes 3 times and then release. You should hear a beep to let you know it is reset. It might take you 2 times sometimes. If you have the message in the text window the little triangle in the center of the speedo assy. will flash. Also another trick to help you is when the milage returns the light should be reset.

Jan 22, 2009 | 2004 Volvo S60

3 Answers

Orange symbol on dash


What does the light resemble?

Sep 30, 2008 | 2003 Saab 9-3

1 Answer

Resetting maintenance light for toyota yaris


Turn the key on.

Observe the odometer

Is it displaying ODO/total miles traveled? If not, depress the trip reset button until ODO is displayed

Key off

Press & hold the trip reset button, keep pressing it until advised to release it.

Key on

Observe the odometer display

you should see 5 dashes, then 4, then 3, then 2, then 1, and then 5 zeros, and then the mileage you started with.

Release the button.

You are done,

If you do NOT see 5 dashes, 4-3-2-1, set the trip meter to "trip 'A'"
and retry as instructed above. Some Toyotas use either method.

Sep 24, 2008 | Toyota Yaris Cars & Trucks

4 Answers

Reset maint req


Reset - step 1 turn the key to the 'on' position. using the trip meter button, toggle the lcd until 'ODO' is displayed. step 2 turn the key off. now, push and hold the trip meter button. while holding the trip meter button, turn the key to 'on'. step 3 while you continue to hold the trip meter button, you will see on the lcd disply five (5) small dashes and they will begin to 'count down' rather quickly. step 4 continue holding the trip meter button and once all the dashes have been cleared, your lcd will display six zeros (000000) - release the trip meter button now - and then the lcd will display 'ODO' and your current mileage. at this time, your 'maintenance required'/oil change light has been reset.

May 15, 2008 | 2005 Scion tC

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...