Question about 2000 Chevrolet Impala
I replaced the turn signal assembly in the steering column and all problems went away. My give away was when I could not use the high beams
Posted on Apr 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have the same issue (which comes and goes often).
It is caused by a loose wire connection, used for the drivers side airbag located in the seat.. The connector for mine is located under the front drivers seat. There are a couple of connectors that are connected to a bar under the front of the seat. I don't recall which one is used for the Airbag sensor.
Posted on Mar 04, 2009
When the airbag light is on it means a fault has occurred in the system and the airbag diagnostic monitor has disabled the system, the most common problem that turns the light on is a break in the connection to the steering wheel mounted airbag, this is due to a rotating ribbon contact that breaks under the steering wheel that connects the airbag to the wiring harness and the diagnostic monitor, the part is called th clock spring contact, a coiled up ribbon electrical contact that turns with the wheel
Posted on Sep 29, 2009
there is a computer chip in your key this is not actually a chip but in the ignition its self has thin white security wires and one of them is braking if you take your car to the shop they will tell you it will cost around 300.00 to fix but the new ignition will cost you around 100 dollars and to get the new key made you will have to take new key the dealer and buy new key with chip in it this will cost around 85 dollars so all and all it will cost you 185 and time and energy of course Tools needed Wheel puller, backing plate compressor , snap ring pliers, Philips head screw driver. Long story short pull wheel and change ignition cylinder get new key made at dealer
Posted on Dec 22, 2009
Tips for a great answer:
Sep 24, 2013 | 2002 Chevrolet Impala
Mar 16, 2010 | 2003 Chevrolet Impala
Sep 29, 2009 | 2003 Chevrolet Impala
Sep 16, 2009 | 2000 Chevrolet Blazer
May 30, 2009 | 2000 Chevrolet Impala
Feb 15, 2009 | 2000 Chevrolet Impala
Dec 07, 2008 | 2000 Chevrolet Impala
Jul 15, 2008 | 2000 GMC Jimmy
111 people viewed this question
Usually answered in minutes!