Question about 1994 Ford Bronco
Has no fire or fuel
The spark problem is first because the computer uses the same signals to control injection Ford used two types of ignition systems #1 closed bowl this has the control module mounted on a heat sink next to the drivers hood hinge and 6 wires coming out of distributor or thick film where the module is mounted on distributor on both systems need to test the pick up coil with a logic probe for cycling voltage ok replace module if not ok replace pick-up coil.
Posted on Apr 20, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It is fairly easy to do. remove rear wheels and brake drums, remove the differential cover, rotate the diff to access the diff pin bolt and remove, remove pin, push axles inward and remove c clips, slide out axles and replace seals. reverse procedure
Posted on Dec 29, 2008
The problem is most likly the sending unit in the fuel tank but check the float. drain tank, there are two bolt in the straps on the fuel tank lossen enuf to lower tank to get to top to unplug wires and fuel lines once tank is on the ground thee is a ring on the top of tank holding the pump and sending unit in tap ring around with a screw driver to lossen once you have that off just pull unit out of tank and follow directions that come with sending unit. reverse removal procedure. good luck.
Posted on Apr 07, 2009
could be many things , but fuel and fire are a good sign. check the ESC, and that you have a full 12vdc in the vehicle, then check that all cyl have fire, poss bad coil pack
Posted on Oct 04, 2009
Tips for a great answer:
Apr 16, 2015 | 1987 Ford Bronco
Jan 03, 2015 | 1994 Ford Bronco
May 04, 2014 | 1994 Ford Bronco
Mar 29, 2014 | 1987 Ford Bronco
Jan 09, 2011 | Ford Bronco Cars & Trucks
Jan 31, 2009 | 1994 Ford Bronco
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: