Question about Mitsubishi MT160, MT160D, MT180, MT180D, MT180H, MT180HD, MT210, MT210D, MT250, MT250D, MT300, MT300... (TRM1)

1 Answer

Mt180d hrdraulic problem

How do i change the hydraulic oil in my tractor

Posted by on

  • kevinball369 Jun 19, 2009

    i just want to change the oil, as it has become contaminated with water

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Since you are not saying which hydraulic oil you want to change I will give you a site where you can log in and they can help you with the oil and any problems you have had since you didn't say what the problem was. You will have to become a member but costs nothing except your e-mail address’s go to http://www.tractorbynet.com/forums/mitsubishi-satoh/101519-welcome-hydraulics-forum.html and you can find what you need.

Posted on Jun 19, 2009

  • Bruce Hathcock Jun 19, 2009

    you remove the plug on the bottom side of the transaxle and rasie the seata nd pull out the plug to fill it with oil the web page shows the oil to use and the plugs you need to unscrew.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford 7810 series 2 hydraulics have gone very slow have pressure tested tractor and it is OK until you rev it up the pressure goes oil sound like it is sergin in back end of tractor oil level OK ?


Best advice is for you to list this in Lawn and Garden or Construction equipment section for Tractors. There is a valve knob on a 4000 series that proportions hydraulic flow from more in back than front depending on the setting. If you have a front loader or if you have rear attachments you can get more action on the end you want. On a 4000 the knob is by the right heel of the driver. Could work like this for 7810.

Jul 20, 2017 | Ford Cars & Trucks

2 Answers

What type of oil do you use in a david brown 880 selectomatic?


hydraulic oil suitable for the tractor
contact a service dealer for the exact type and viscosity

May 26, 2016 | Cars & Trucks

1 Answer

Don't know how to read the hydraulic dipstick for a 1944 ford 2n tractor


Ford Tractor Hydraulic System - My Ford Tractors

www.myfordtractors.com/hydraulics.shtml
All N-Series Tractors - Ford-Ferguson 9N, 2N, and Ford 8N ... 6 - How long has it been since you changed the hydraulic fluid? ... If that didn't do it, read on. ... then remove the bottom bolt from the inspection plate that has the hydraulic dip-stick.

Yesterday's Tractors - Fifty Tips for Ford 9N, 2N and 8N ...

www.yesterdaystractors.com/articles/artint268.htm
I'd like to say that the reason I have an 8N Ford tractor is because that's the tractor ... The N tractors have a common sump for the rear end, hydraulic pump andtransmission. ... (Read the label.) .... Take the inspection plate with the dipstick off.

Ford 8N, 9N, 2N, NAA Tractors Information - SSB Tractor ...

www.ssbtractor.com/wwwboard/messages15/
Helpful information and resources on Ford 8N, 9N, 2N, NAA tractors from SSB Tractor, a leading provider of tractor parts, manuals, implements ... 1944 ford 2n: What type of oil to use? and whats the oil pressure should be? ...... N Series Trans/Hydro Fluid - Interesting To Read ... Ford NAA/Jubilee Hydraulic dipstick location?

Jan 01, 2016 | Ford Cars & Trucks

1 Answer

How to check the hydrolick fluid on a 1972 ford 5000 it has no dipstick I just got this tractor


Ford Tractors Information - SSB Tractor Forum

www.ssbtractor.com/wwwboard/messages4/
Helpful information and resources on Ford tractors from SSB Tractor, a leading provider of tractor ... tractor pumps oil but won't pump hydraulic fluid ..... 1972 Ford LGT165 lawn and garden tractor hydraulics ..... Ford 5000 transmission oil level

Aug 17, 2015 | Ford Cars & Trucks

1 Answer

What oil should i put in Fiat 411r hydraulics?


I read someplace the hydraulics use the engine oil. I have the same question. It looks like the hydraulic pump is located at the right hand side of the engine block, forward and is connected to it. Although the previous owner of my tractor used hydraulic fluid.

Apr 10, 2012 | Cars & Trucks

1 Answer

How to drain the hydraulic oil fron my mitsubish mt 250d?


Why do you want to?, most hyd. oil does't need changed just the filter!

Mar 10, 2011 | Mitsubishi MT160, MT160D, MT180, MT180D,...

1 Answer

Correct procedure for starting tractor?


Just till the plug / light glows then start, if you hold it too long the glow plugs wil burn out causing hard starting.

Apr 10, 2010 | Mitsubishi MT160, MT160D, MT180, MT180D,...

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

738 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...