Question about GMC Jimmy
Most ignition switches are fastened with Break bolts , which means they are tightened until the head breaks off .,This is to stop theft.
You have to drill out the old bolts ,
Posted on Feb 02, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I don't know that specific vehicle, but if its a hydraulic clutch it sounds like either you have a leak and your clutch fluid is low, or the master or slave cylinder could be bypassing internally. Check the fluid level in your clutch master cylinder. If its low, you should top it off with brake fluid and will probably have to bleed the system. Also look for leaks. You can probably find info or a video online of how to bleed the system. Its a bit hard to explain without illustrations or pictures. Not really very difficult to perform. Good luck.
Posted on Dec 22, 2009
You'll need a bench vice for this. A few sockets help as well. Once you get the shaft off the truck, put a smaller diameter socket on one side and a much larger diameter socket on the other and sandwich in a vice. Compress vice to drive the U-Joint through shaft (smaller socket will drive the one side through the other with the much larger socket). Installation is the reverse of removal.
Posted on Aug 02, 2010
SOURCE: I need manual for 1987
the best thing for you to do is stop by your local library and get your hands on a Haynes auto repair manual for your truck wish you the best of luck Michigan Man.also like to give you this information if you every have any hard to find GM-parts its Schram auto & truck parts they only sells GM- parts 1-800-292-1032 and they website is www.schramauto.com
Posted on Oct 09, 2010
Posted on Oct 02, 2011
Tips for a great answer:
Apr 19, 2014 | GMC Jimmy Cars & Trucks
Oct 02, 2011 | 1987 GMC S-15 Pickup
Aug 10, 2011 | 1987 GMC S-15 Pickup
Jun 11, 2011 | 1987 GMC S-15 Pickup
Jun 06, 2011 | 1987 GMC S-15 Pickup
Jan 24, 2011 | 1987 GMC S-15 Pickup
Jan 31, 2010 | 1987 GMC S-15 Pickup
Dec 22, 2009 | 1987 GMC S-15 Pickup
Oct 02, 2009 | 1987 GMC S-15 Pickup
Jul 20, 2009 | 1987 GMC S-15 Pickup
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: