Question about 1996 Acura Integra GS-R

Open Question

Acura integra torque specs - 1996 Acura Integra GS-R

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: acura integra engine torque specs

56 ft lbs torque main bearings, NON v-tech engine.

Posted on Jan 15, 2009

Ad
  • 71 Answers

SOURCE: what is the torque spec's on a acura integra gs 90

1990-1991 OBD0*
Engine: B18A
Cylinder Arrangement: Inline 4 Cylinders, Transverse
Type: Water cooled, 1.8L, 4 cylinder, 16 valve, DOHC
Displacement: 111.9 cu in (1834 cc)
Bore & Stroke: 3.19 in x 3.50 in (81mm x 89mm)
Compression Ratio: 9.2 : 1
Valve Train: Double Overhead Camshafts, Belt Driven
Fuel System: Programmed Fuel Injection (PGM-FI)
Horsepower: 130 hp @ 6000 rpm
Torque: 121 lbs.-ft. (16.8 kg-m) @ 5000 rpm
Redline: 6500 RPMs
Engline Block: Aluminum Alloy with Cast Iron Cylinder Liners
Cylinder Head: Aluminum Alloy

Posted on Jul 07, 2010

TDISLine
  • 1874 Answers

SOURCE: What are the torque specs

Acura Integra Wheel Bearing Replacement - '94-01


Wheel bearing replacement applies to Acura Integra models between 1994-2001.

Removal

  1. Remove steering knuckle. Using Front Hub Remover/Installer (07GAF-SE00100), Hub Remover/Installer Base (07GAF-SD40700) and hydraulic press, remove hub from steering knuckle. Remove splash guard screws and splash guard. Remove bearing retaining snap ring and knuckle ring from knuckle.
  2. Using bearing driver and Attachment (07746-0010500), base and hydraulic press, remove bearing from knuckle. Using commercially available bearing separator, remove inner bearing race from hub. Clean knuckle and hub thoroughly before reassembly.
Installation
Using press and old bearing, install NEW bearing into knuckle. Install snap ring into knuckle groove. Install bearing retaining snap ring splash guard. Invert knuckle. Press new bearing into hub. Press hub into knuckle. To complete installation, reverse removal procedure. Check alignment.


Acura Integra Hub & Knuckle Removal

How to remove and install hub and knuckle from Acura Integra 1994-2001 applies to all models.


Removal

  1. Raise and support front of vehicle. Allow suspension to hang freely. Remove wheel assembly and spindle nut. Remove brake caliper mounting bolts, and wire caliper aside.
  2. Remove brake disc 6-mm retaining screws. Screw two 8 x 10-mm bolts into disc to push disc away from hub. Turn each screw alternately, and remove disc. Without disconnecting, remove wheel sensor and wheel sensor harness from knuckle (if equipped).
  3. Clean dirt and grease from ball joints. Remove cotter pins from tie rod end ball joint, lower control arm ball joint and upper control arm ball joint. Loosen castle nut half length of ball joint threads. Using 28-mm Ball Joint Remover (07MAC-SL00200), separate in order: tie rod end ball joint, lower control arm ball joint and upper control arm ball joint. Pull hub/knuckle assembly from axle.

tdisline_882.jpg
Installation
To install, reverse removal procedure. Tighten bolts and nuts to specification. Use NEW spindle nut, and stake it after tightening.

tdisline_883.jpg Torque Specifications - Ft. Lbs. (N.m)
  • Brake Caliper Bolt: 80 (108)
  • Lower Ball Joint Castle Nut: 36-43 (49-58)
  • Lower Control Arm Anchor Bolt: 47 (64)
  • Radius Arm Bracket Anchor Bolts: 66 (89)
  • Radius Arm Nut: 61 (83)
  • Spindle Nut: 134 (181)
  • Stabilizer Bar Bushing Bracket: 16 (22)
  • Stabilizer Link-To-Control Arm Nut: 16 (22)
  • Stabilizer Link Ball Joint-To-Stabilizer Bar Nut: 22 (30)
  • Strut Fork Pinch Bolt: 32 (43)
  • Strut Fork-To-Control Arm Nut: 47 (64)
  • Strut Mounting Base Nut: 36 (49)
  • Strut Mounting Nut: 22 (30)
  • Tie Rod End-To-Knuckle Castle Nut:
    • 1997: 29-35 (39-47)
    • 1998: 32 (43)
  • Upper Ball Joint Castle Nut: 29-35 (39-47)
  • Upper Control Arm Nut: 47 (64)
  • Wheel Lug Nut: 80 (108)
  • Speed Sensor/Harness Mounting Bolts: 84 inch pounds
  • Splash Guard Bolt: 44 (5) inch pounds

Posted on Sep 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need camshaft torque specs ?


Are you doing all this work without a shop manual? It should have the info you seek.

Jul 16, 2015 | 1998 Acura Integra

1 Answer

What is the torque pattern for the head on a 96 acura integra gsr i already kno what ft. lbs they all are i just need to kno what pattern to torque them in


<P>all cylinder heads are the same start at the middle then work outwards like&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;11.9.3.1.6.8.14.</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 13.7.5.2.4.10.12.</P><P>start with 1/2 torque then 3/4 then full torque.then recheck ALL BOLTS after 250 miles.</P>

Aug 25, 2010 | 1996 Acura Integra GS-R

1 Answer

What is the torque spec's on a acura integra gs 90 motor ?


1990-1991 OBD0*
Engine: B18A
Cylinder Arrangement: Inline 4 Cylinders, Transverse
Type: Water cooled, 1.8L, 4 cylinder, 16 valve, DOHC
Displacement: 111.9 cu in (1834 cc)
Bore & Stroke: 3.19 in x 3.50 in (81mm x 89mm)
Compression Ratio: 9.2 : 1
Valve Train: Double Overhead Camshafts, Belt Driven
Fuel System: Programmed Fuel Injection (PGM-FI)
Horsepower: 130 hp @ 6000 rpm
Torque: 121 lbs.-ft. (16.8 kg-m) @ 5000 rpm
Redline: 6500 RPMs
Engline Block: Aluminum Alloy with Cast Iron Cylinder Liners
Cylinder Head: Aluminum Alloy

Jun 24, 2010 | 1990 Acura Integra Hatchback

1 Answer

I need the specs to adjust the valves on my 94 acura integra gsr


Hey mate,

I am not to sure of the specs required, however if you go here:

http://www.hondahookup.com/manuals/

You can join up for free and then you can download one of the following manuals.

You should be able to find something that helps you out.

Mar 04, 2010 | 1994 Acura Integra

1 Answer

Internal engine torque specs for DOHC zc (88-91


you can get a haynes, or chilton repair manual at most part store, this manual will have all the internal torque specs, as well as some hints!

Oct 27, 2009 | 1996 Acura Integra GS-R

1 Answer

Acura integra engine torque specs


56 ft lbs torque main bearings, NON v-tech engine.

Jan 15, 2009 | 1996 Acura Integra GS-R

2 Answers

Acura integra radio unlock code


call or stop by your local honda dealer. they should be able to help you. there shouldnt be a charge.

Aug 24, 2008 | 1993 Acura Integra Hatchback

Not finding what you are looking for?
1996 Acura Integra GS-R Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...