Question about 2002 Lincoln Town Car

Open Question

Electrical Problems Door locks, trunk latch, and power mirror isn't working. Do you know what could be the problem?

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 56 Answers

SOURCE: 1995 Town Car Signature driver side power lock doesn't work

Yes there is a fuse, from the eletrical diagram i am seeing power comes from the power distrubtion box and also fuse in the Fuse box,

Check your fuses for any blown ones. Im seeing a 15amp and 20 amp fuse and a 40amp feed from the distrubtion box.

Posted on Feb 16, 2009

Ad
  • 2 Answers

SOURCE: Trunk latch pull down

You could try setting release to work manually. I have had the same problem. Take tne motor off set the catch clip at the right height. This should work with no cost.

Posted on Jun 04, 2009

  • 30 Answers

SOURCE: 1997 lincoln continental power seats do not move

do u hear the motor for the seat humming when you press the button??.. If you don't the wire connector may be detached from the motor...it is located under the seat.... check to make sure it is fully connected ...if it is you'll need to check if it has power...worst case is that the motor is burnt... good luck

Posted on Apr 05, 2010

badfish6686
  • 563 Answers

SOURCE: my 2006 lincoln navigator windows, mirror or door locks won't work

I would guess the problem would be located with the drivers door harness. All of these items are controlled from the same place, remove door panel and check harness connectors for tightness and water damage.

Posted on Apr 10, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Would it be a fuse


Colin, always good to check fuses/relays first. Your trunk lock may be seizing up and need lubricated, damaged/pinched wires/loose plug to actuator, power lock actuator could be weak and faulty, etc.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.automotiveforums.com/t504960-discuss2003_towncar_trunk_problem.html
http://www.driveaccord.net/forums/4-problems-solutions/9064-power-trunk-release-not-working-via-key-fob.html
Mercedes Trunk Actuator Lock Repair DIY how to fix car door latch

May 03, 2016 | Cars & Trucks

1 Answer

Replace passengers side rear electronic door lock


Instructions
    • Remove the two Phillips screws in the arm rest and the singular screw holding the cover in front of the door handle. Remove the outside mirror cover by prying it off with the common screwdriver.
    • 2Remove the door panel by inserting the common screwdriver in between the door panel and the door. Slide the screwdriver along the outside circumference of the door and pry the trim fasteners out of their recess.
    • 3
    • Remove the door panel and disconnect the electrical connectors to the switches.
      Remove the electrical connector from the power door lock through the access panel in the door.
    • 4Remove the power lock mechanism located below the door latch. The power lock mechanism is in a bracket attached to the back-side of the door below the door striker. The door lock is snapped into its bracket with the rubber bushings. It has a vertical rod running from the door lock to the door latch. Unsnap the door lock and then lift it up and turn it so the rod can be removed from the door latch.
    • 5Install the door lock and door panel in reverse order of removal

Sep 17, 2012 | 1999 Toyota Corolla

1 Answer

2002 Saturn SL200 Electrical Problems


Well, you can have a try of autocam pro, it is very useful.

Jul 23, 2012 | 2002 Saturn Sl

1 Answer

Electrical problems with a 2002 Satun SL 200, the electrical door locks dosn't work, the mirror adjustments dosn't work, the dome light dosn't work. The engine runs good. head lights work


check all your fuses in engine compartment and under dashboard engine check light comes on every 3000 miles for oil change reminder

Jul 23, 2012 | Cars & Trucks

2 Answers

Trunk release button on 2001 ford focus will not work


So your trunk release button on the dash dpesn't seem to open the trunk.
Does your key fob button open the trunk? yes....then could be problem with switch but read on.
no......are your power door locks not working as well. not working.....check
fuse, on 2001 Focus the fuse is a 20amp number 63 on the back of the fuse panel under the dash. Pop cover off and undue the rwo screws. hold plastic retainers and pull off the fuse panel from metal frame. pull fuse panel down toand turn over so you can see the fuse.check fuse. blown? yes.......replace fuse with good one. test all door locks open/close then check fuse...if its blown the problem is something to do with the door lock circuits. if the fuse is still ok...try pushing the trunk open button. fuse still ok? then I am a loss toas to whats the problem but if the fiuse blew when trying the trunk button your problem is the trunk latch circuit.
Now if the trunk latch button is popping the fuse then disconnect wiring to
trunk latch (in trunk) and try the button again. Still blowing the it is the electrical before the trunk latch unit. If it did now blow the problem is something to do with the part of the circuit you disconnected.
How to go farther and find the problem exactly is not covered in this answer. You have to take it from here. JAG

Mar 17, 2012 | 2001 Ford Focus

1 Answer

The trunk lock latch is in the lock position in the trunk and the key will not open the trunk in a 1994 pontiac grand am


Often,the trunk latch does not get lubricated enough(I can tell you from my dealer tech experience that places like Jiffy Lube NEVER service the body latches).Try pulling the release handle while some else "slaps" the trunk lid.This usually works on the hood,trunk,and remote fuel door release.I would see many Grand Ams that were only 2-3 years old with these problems.

Feb 24, 2012 | 1994 Pontiac Grand Am

2 Answers

1996 lincoln continental door latch does not lock/unlock door from inside or outide...door stays open basically...door latch has no response, unlock/lock switch works


I have the same problem.(Door will not stay closed) The door latch itself seems worn to the point where the linkage from both the actuator or door handle causes the latch to get stuck. I can free it with a screw driver applied where linkage connects to the latch, but it will stick again. Dealer wants over 300 with actuator. I am looking in junk yard for part. Remove door panel, somehow disconnect linkage from latch. It makes more sense to remove 3 hex or star screws 1st (27mm) so latch will be more accessible. My problem is the door latch, not anything else. Good luck

Jan 24, 2011 | 1996 Lincoln Continental

1 Answer

New Battery, Electrical Problems


Some newer vehicles will need resetting of computer after messing with battery. Check owners handbook or repair manual for your specific vehicle.

Jan 26, 2010 | 2000 Chrysler 300M

1 Answer

Replace drivers door due to crash. old door had 3


You have to examine and compare the two doors. I am just guessing but I would bet that it is the power mirror that your new door is lacking.

Just follow the wiring into each door.

1. Power locks wires should run to a region near the latch mechanism.
2. Power Windows wires should run to somewhere in the middle of the door.
3. Power mirror should run almost straight up towards the mirror assembly.

If it is the power mirror assembly you should be able to transplant your old one provided that it is not damaged.

If it is power windows, adapting power windows will be much harder as the new door may or may not have the provisions for mounting the regulator, etc.

If it is power locks you may need to transplant the latch and actuator assembly along with its wiring.

Jan 25, 2010 | 1991 Honda Accord

Not finding what you are looking for?
2002 Lincoln Town Car Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...