Question about 1969 Plymouth Barracuda

Open Question

Clutch diagram pedal - 1969 Plymouth Barracuda

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need a clutch pedal diagram for a 1999 s10 2.2 4cyl manual trans


Sorry no diagram. But here is how it works. In the start position(Power) the wire goes to the start fuse, from the fuse it goes to the clutch pedal switch. Push the pedal and it goes to the starter relay. On the other end is ground. If it is good it pulls the relay closed. On the closed end is battery power to the starter.

Mar 09, 2016 | 1999 Chevrolet Silverado 1500

1 Answer

Just bought a 1996 jeep Cherokee didnt get it a mile then a noise no clutch.the cable didnt break just the bracket that holds the cable to pedal.help please


Here's a link to one of many parts places, complete with a diagram you can use to identify and order the broken part. There are several components to the clutch pedal unit. Study this diagram and see if you can identify the broken piece. Then you can order it, and either take it to a trusted mechanic or do it yourself. Your local auto parts store can order as well.

PEDAL CLUTCH CHEROKEE Fits 1996 JEEP CHEROKEE

Apr 02, 2015 | 1996 Jeep Cherokee

1 Answer

I need a diagram for clutch linkage for 1966 chevy impala


Its pretty simple set up, you go from the pedal assembly to the rod in the back down to the frame rocker, the linkage from the frame rocker to the clutch fork, you will also have a return spring there

Jan 08, 2015 | Chevrolet Impala Cars & Trucks

1 Answer

95 Tacoma clutch pedal assembly diagram


is this what you wanted ? if not go to auto zone library . if this helped you please check box below (helpfull)

Oct 15, 2014 | 1995 Toyota Tacoma

1 Answer

Is there a diagram of where the clutch return spring is on a 2008 Hyundia Santa Fe?


The clutch don't have spring to return. hydraulic pressure return the pedal. if you pedal go down to the flour and don't return you lost the pressure. First look in the reservoir for fluid. add DOT3 brake fluid and bleed the system. inspect for leak
Good luck

Apr 15, 2014 | 2007 Hyundai Santa Fe Limited

1 Answer

Clutch cable connected to pedal assembly broken or disconnected


I have never seen a cable operated clutch on this model, only hydrolic, with a master cylinder and slave.

Nov 01, 2009 | 1991 Nissan Pickup

1 Answer

Need diagram of routing for the clutch cable


check connection at or right before clutch connection point

Oct 04, 2009 | Volkswagen Cabriolet Cars & Trucks

1 Answer

Daigram of 1995 Honda Civic EX plug clutch pedal ?


95 civic coupe ex brake lights wont work and the shifter locks in park position, what's wrong?

Sep 09, 2009 | 1995 Honda Civic

1 Answer

Broken clutch pedal


The shaft attached to the pedal connects to a device that changes the forward motion of the pedal to a backward motion to the clutch. These shafts are attached with cotter pins and you might be lucky and simply broke one. Check this site for how a clutch works: http://auto.howstuffworks.com/clutch.htm

Reattaching the shafts with new cotter pins isn't hard. But if one is broken, you have to get a replacement. Try a junk yard, it's cheaper.

May 26, 2009 | 1994 Jeep Wrangler

Not finding what you are looking for?
1969 Plymouth Barracuda Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...