Question about 2002 Pontiac Grand Prix

Open Question

Windshield wipers flop clear over driver's side of car

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: windshield wiper arm

I've got the same problem. Some of the auto stores I saw like Autozone only carry driver side. But I did see a passenger side wiper arm at Rockauto.com for $16. They designate it as front right. Needless to say it is out of stock and takes 34 days to deliver.

It does have a different curvature, keep checking the internet.

Posted on Jan 12, 2009

landsend
  • 1066 Answers

SOURCE: windshield wipers wont work

the linkage on the arms has broken.

Posted on Mar 27, 2009

  • 6982 Answers

SOURCE: windshield wiper on car iced up during snow/driving could not see

You can usually avoid that by using a good quality winter mix washer fluid that resists freezing, making sure the wipers are cleared of ice before beginning the drive and using the defroster to keep the windshield warm. In extreme conditions you just need to pull over and manually clean the ice off by hand.(only do that where it's safe). There are also specially designed wiper blades that will also help a bit.

Posted on Jan 03, 2010

ftw1952
  • 10319 Answers

SOURCE: 2004 grand prix driver side wind shield wiper

The arm is stripped onto the stud its pressed into which is call a wiper transmission. That part mounts to eack ww blade then to the wiper motor. You need a new transmission and maybe a new wiper are as well

Posted on Jan 20, 2010

  • 3911 Answers

SOURCE: Windshield wipers The driver's side arm is not

you need to pull the plastic cap off the wiper arm base, remove the nut holding the arm to the splined shaft. then pull the arm off and turn the wipers on. if the little splined shaft is turning back and forth with the remaining wiper arm, then you have a bad wiper arm. the splines or serrations on the inside of the base get stripped and the little shaft cannot grip it to move it anymore. take your wiper arm to a local junkyard and have them find you a replacement which is not stripped. put it on in reverse order, if you have some loctite around this would be a good time to use it when you tighten the nut back down.

if the little shaft is not turning back and forth, then your wiper linkage or transmission is bad and this will most likely be a job you will want a shop to to. do not pry on the glass or use the window as a pry point to lift the arm off, it may need some gentle rocking to come loose but not prying.

Posted on Dec 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger side windshield wiper working slow


there is 2 wiper motors . 1 for the drivres side and the other for the passenger. sounds like a bad passenger side motor

Dec 21, 2012 | 2005 Chrysler Pacifica

1 Answer

HOW DO YOU ADJUST THE WIPER ARM TENSION HAD WINDSHEILD REPLACE AND NO WIPER IS BLOWING AROUND NOT CLEANING OF WINDSHEILD WHEN DRIVING OVER 45 MPH EVERYTIME A TRUCK GOES BY THE WIPER FLOPS


Hello: From your description of the problem it sounds like the wiper arm is bent. This could have occurred when the windshield was replaced. You might take truck back to who ever replaced windshield and DEMAND they correct the problem. The w/w arm will have to be replaced.

Jan 24, 2011 | 2002 Ford Windstar Cargo

2 Answers

Passenger side wiper does not work


If the driver side wiper is working then the linkage under the long thin grille at the lower of the windshield has disconnected. You can remove the screws from the wiper cover assy cover and usually snap the link rod back on fairly easy. This usually happens when folks do not take the time in winter to clear the windshield of ice before turning on the wipers. If the wiper blades are stuck to the windshield and you turn them on this linkage will pop off and you can also strip out the wiper arm where it bolts on to the pivot, you can should try and tighten this nut first and get lucky. See if the pivot is moving is so tighten the nut at the bottom of the wiper arm. If the pivot is not turning it is the link rod.

Nov 16, 2010 | 2004 Pontiac Grand Am

1 Answer

Windshield wiper on car iced up during snow/driving could not see


You can usually avoid that by using a good quality winter mix washer fluid that resists freezing, making sure the wipers are cleared of ice before beginning the drive and using the defroster to keep the windshield warm. In extreme conditions you just need to pull over and manually clean the ice off by hand.(only do that where it's safe). There are also specially designed wiper blades that will also help a bit.

Jan 03, 2010 | 2000 Pontiac Bonneville

2 Answers

2002 Chevy Tahoe-Drivers Side windshield wiper not working


There is a bar that connects both your windshield wipers together check that to see if it is broke or has come unscrewed. Should be underneath the hood upagainst the firewall.

Sep 22, 2009 | 2002 Chevrolet Malibu

2 Answers

Drivers side wiper


If it is only the driver's side that doesn't work, it is a mechanical problem. There is one motor that operates both blades, so if one is working, it's not the motor or fuse. The two most common problems would be a stripped out gear where the wiper arm attaches at the bottom of the windshield, or a detached linkage. There is a metal bar running under the cowl, and it has pins that attach it to each wiper. See if these are loose. Hope this helps :)

May 05, 2009 | 1988 Plymouth Reliant

3 Answers

Wiper arm goes off of the windshield when it is raining


Sounds like you just nee to remove them and reinstall them in the correct position. Take them off, run the wipers for one cycle until they park. Install the arms so the blade is about an inch above the bottom of the windshield.

May 02, 2009 | 1995 Honda Accord

1 Answer

Driver side wiper blade doesn't sync with passenger side blade


the wiper arm assembly is stripped for the knurled knob that is sits on.  replace the wiper arm with a new one.

Mar 30, 2009 | 1995 Geo Prizm

1 Answer

Windshield Wiper spring broke on 97 Chrysler Concorde


You need to go to the dealer and buy a new arm. Sometimes some local part stores will have them.

Mar 12, 2009 | 1997 Chrysler Concorde

1 Answer

Windshield wiper problem


this could be a result of the linkage coming apart this is located under the cowel and not easy to service. It could also be a result of bad splines between the wiper arm adn wiper arm shaft. if the later is the case you can sometimes tighten the 15 mm nut that holds the arm to the shaft. but this will only work once or twice before the arm requires repolacement. remember folks, wipers are your friend in the winter, they are not ice chippers or snow plows, always clear your windshield with an ice scraper and make sure the wiper blades are not frozen to the glass. this small form of torture in the cold will save you big $$$ in the auto repair shops.

Dec 09, 2008 | 2008 Chevrolet Malibu

Not finding what you are looking for?
2002 Pontiac Grand Prix Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...