Question about 1995 Ford Contour

Open Question

Locate central timer module

Location and description of Central Timer Modiule

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 87 Answers

SOURCE: battery draining down when parked but no lights on

the central timer module is located in the back of the main central fuse box. This module contains the time contol elements for the heated rear window, interior lights and intermittent wiper operation, the module also activates a warning buzzer when the lights are left on

Posted on May 14, 2009

  • 157 Answers

SOURCE: where is the central fuse located in the fuse

located on driver side under steering litle to left .top of brake padle

Posted on Nov 01, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is location of lighting control module on 2002 Dodge Dakota?

It's called the Central Timer Module (CTM) and it's either on the left side next to the driver's feet behind the trim panel, or behind the glove box on the right side. They changed the location sometime between 2001 and 2003.

Feb 18, 2017 | Dodge Dakota Cars & Trucks

1 Answer

2001durango and the rear wiper will not work the relays and fuses are good and their is no corrosion on the plugs what possibly be causing it not to work? Only one of the pins is getting constant 12

Which pin is get the constant 12 volts ? How many pin's are there ? two ? Brown with pink stripe an brown with lite green stripe. The brown with pink comes from the rear wiper relay when energized by the central timer module (computer ) fuse J 20 amp in power distribution center . The black wire is ground , is it good ? Pin three ,brown with lite green is control from central timer module . The Central Timer Module or CTM is just another name for a body computer.Sorry but your best bet is to take your vehicle to a qualified repair shop . 1998 2003 Dodge Durango electrical systems and electronics in detail

Jul 30, 2016 | Cars & Trucks

1 Answer

Where is the body control module on a 1999 Dodge

The actual name of the part is Central Timer Module or CTM. I would get a Haynes manual. I was unable to get a part location for that. Haynes manuals are very accurate with pics and descriptions.

Aug 29, 2014 | Cars & Trucks

1 Answer

Headlight relay

On your truck, the headlight switch sends a ground signal to the central timer module. The module powers the headlights and other circuits.
The module should be behind the driver side kick panel under the dash.

May 30, 2013 | 2002 Dodge Durango

1 Answer

Cant find the body control module on my 1998 dodge ram 1500

your truck does not have a body control module,it has a central timer module located directly behind the cup holders in center of dash

Jan 30, 2013 | 1999 Dodge Ram

1 Answer

Central timer module

It's behind the fuse box

Mar 31, 2012 | 2001 Ford Focus

1 Answer

I have 2002 dodge Dakota I sparked the battery and now the headlights taillights cargo and dome and dash lights don't work I replaced headlights switch checked fuses and replaced computer idk what to do...

Check these fuses again:
In the Power Distribution Center (in the engine compartment, left fender panel) Fuse #3 (20 Amp) Fuse #7 (40 Amp), Fuse #12 (20 Amp) and in the Junction Block (on the left end of the dash) Fuse #1 (15 Amp)
Use a test lamp and make sure that these fuses have power. All of these fuses should all have power at all times, regardless of ignition switch position. If they are all good and have power, then you probably need to replace your Central Timer Module. All of the circuits you listed are dependant on this module for operation.

The Central Timer Module is located at the left kick panel.

Central Timer Module System

The CTM is available in a BASE or a HIGHLINE configuration. The BASE and HIGHLINE CTM provide the following features:
• Battery saver functions for exterior and interior lights
• Cargo lamps chime warning
• Courtesy lamps
• Dome lamps
• Dome lamp defeat
• Door ajar switch state
• Fog lamps
• Headlamp time delay
• Intermittent wiper controls
• Low and high beam head lamps
• Optical horn
• Park lamps

In addition, the HIGHLINE CTM provides the following features:

• Central locking
• Door lock inhibit
• Driver door unlock
• Enhanced accident response
• Horn chirp
• Optical chirp
• Power door locks
• Remote keyless entry (VTSS)
• Remote radio

May 03, 2011 | Dodge Dakota Cars & Trucks

1 Answer

No headlights dash lights inside lights four wheel light

Check the central timer module for water intrusion, the module is located behind the sill plate/ kick panel to the left of the brake pedal. Disconnect the three connectors and check for corrosion. The CTM controls all body related functions. If corrosion is present replace the CTM and repair/relace wiring as needed.

Feb 05, 2011 | 2002 Dodge Durango

1 Answer

Battery draining down when parked but no lights on

the central timer module is located in the back of the main central fuse box. This module contains the time contol elements for the heated rear window, interior lights and intermittent wiper operation, the module also activates a warning buzzer when the lights are left on

May 12, 2009 | 2000 Ford Focus

1 Answer

I need installation directions for installation of a gem module

here it is but you must have it configured.

Generic Electronic Module (GEM) —Generic Electronic/Central Timer (GEM/CTM) Removal
NOTE: The GEM must be reconfigured upon replacement. Refer to the scan tool help screen on the Ford Service Function (FSF) card to program tire size and axle ratio.
  1. syo~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
    Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  2. syo~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care when removing the instrument panel steering column cover (044F08) or damage to the cover locating tab may occur.
    Remove the instrument panel steering column cover.
    1. Unlock the retainers.
    1. Remove the instrument panel steering column cover.
  3. Disconnect the bulkhead connectors from the instrument panel fuse junction panel.
    1. Loosen the bolts.
    1. Disconnect the bulkhead connectors.
  4. Position the instrument panel fuse junction panel aside.
  5. Remove the nuts.
  6. Remove the bolts.
  7. Remove the generic electronic module/central timer module (GEM/CTM).
    1. Disconnect the electrical connectors.
    1. Remove the screws.
    1. Remove the GEM/CTM.

Feb 20, 2009 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
1995 Ford Contour Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides