Question about Vauxhall Astra
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: no clutch pressure
The master cylinder located under the dash and connected to the pedal may be malfunctioning. Try bleeding the slave underneath the car first, Be sure your brake fluid is clean also. If the fluid is dirty or muddy looking, it is possible the fluid has "eaten" some of the rubber parts in the master and/or slave cylinder. Flush the system and be sure & use a good quality fluid.
The pedal is directly connected to the master cylinder and if it doesn't come up then it's probably going to be a master cylinder problem if you have bled the system & it still malfunctions.
Posted on Nov 01, 2008
usually when this happen you lost fluid pressure look for a fluid leak at the clutch master cylinder under the hood ,it should be by the brake master ,it has a small plastic tank on top with a black rubber cap or underneath on the transmission there is the clutch slave cylinder it will have a small 2 inch rod that pushes the clutch fork ,look for the rubber boot on it ,see if there is fluid coming out of it ,also follow the clutch fluid lines maybe somthing has damaged one and its leaking !
Posted on Aug 08, 2009
SOURCE: no pressure on clutch pedal
Is the clutch pedal cable or does it have a crutch master cycl or slave cycl, if it is cable may need to be adjusted if it has a clutch master and slave you need to bleed it.
Posted on May 18, 2012
Tips for a great answer:
May 18, 2017 | Mazda Cars & Trucks
Nov 22, 2012 | Cars & Trucks
Jan 26, 2011 | Ford Probe Cars & Trucks
Jan 04, 2010 | 2002 Kia Sportage
Oct 19, 2009 | 1993 Toyota Paseo
Aug 19, 2009 | 1997 Mitsubishi 3000GT
Aug 08, 2009 | 2001 Ford Mustang
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: