Question about 2002 Ford Windstar Cargo

Open Question

2002 windstar powerseat

Power driver seat not working

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bestdarngood
  • 3037 Answers

SOURCE: My driver side power seats and side power mirrors don't work!

sounds like a bad fuse, have a look at your manual and see which fuse controls those parts, they are most likely on the same fuse, the fuse box may also say which fuse is for what, If the fuse in the first box doesn't fix it, try a new fuse in the box under the hood, let me know how this goes, you may also have corrosion in a wire but check the fuses first.

Posted on Jul 03, 2008

Ad
jim9813
  • 124 Answers

SOURCE: 2004 Supercrew Lariat no driver power seat or pedal adjust

Maybe, you can diag yourself with a test light and an ohmmeter. These will cost less at sears than having a dealer diag it. Check fuse 109 in the cab, that's the fuse for the driver's seat module. If that fuse is ok, then check power at the module. It's a little black box under the driver's seat with i think 3 connectors. Back probe the dark green wire at the connector with a test light, you should have power, even with the key off. If not, repair the circuit. Clamp the test light to battery positive and back probe the black wire, if the light does not light, repair that ground circuit. Test the memory set switch by measuring with an ohmmeter points 7 and 2, 7 and 6, 7 and 5 resistance should be less than 5 ohms, if not replace it. If all these tests pass, disconnect the connectors from the module and give 12v to the red and white wire. If the seat moves, have the module replaced at the dealer, it will have to be programmed.

Posted on Aug 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Powerseat on 2002 ford windstar blowes 40amp fuse with motor unpluged


You have a dead short to ground on that circuit ! Passenger seat ? Do you know what a wiring diagram is ? How to test for a short to ground ? Free wiring diagrams here http://www.bbbind.com/free-tsb Enter vehicle info. year , make , model an engine size . Under system click on body & accessories , then under subsystem click on power seat . Click the search button then the blue link . Somewhere between the fuse box an the power seat connector that wire is touching ground ( metal on the vehicle body ) . Videos on youtube showing how to find short .

Feb 23, 2018 | Ford Cars & Trucks

1 Answer

Powerseat switch does not work on 1993 bonnivillehow to manually move seat or jump switch out


Get another switch from a junk yard. the seat will not move manually. If you're going to try to jump the switch it's easier to just replace it.

Dec 23, 2012 | 1993 Pontiac Bonneville

2 Answers

The driver seat will not go forward


if going backward is working,and foward is not,, easy
,1st determine what is defective-so u know what to replace/repair-2 things only ,[1-switch or 2- motor under d seat]
by presing the backward swicth,, you can hear the sound of the motor running and u can see the seat is going backward...
1-now by pressing the foward switch, and you hear the motor running but not that strong like the rear ..and the seat move an inche /a little and stop,,.then u have a defect weak motor,
2- now by pressing the foward swicth and u dont hear any motor running then the switch is most likely defective
defective switch -repair- spray contact cleaner,remove cover switch,penetrate inside
defective motor-repair-remove motor replace inside carbon,,.chiepest way not to spend to much money..
i suggest even once a month,lubricate all power seat/even not powerseat/,door hinges/.trunk door/.power antenna./ .by spraying lubricating oil,. for maintanace,..you can save a lot..

Oct 14, 2012 | Cars & Trucks

1 Answer

Lincoln town car driver's side powerseat and the lights when door is open do not work. if that is a fuse problem which is the fuse?


Check the accessories fuse. Keep in mind that there are two fuse panels one inside the car and one under the hood.

Sep 17, 2012 | 2002 Lincoln Town Car

1 Answer

How do I remove the power drivers seat in a 2003 Windstar. The support frame is broken and it needs to be replaced.


on the seat rail on either side of the seat on the floor itself there are 4 bolts,2 bolts on each of the front rails(1each) and 2 on the back of the seat rails.remove these bolts and disconnect all connectors for the power seat and remove the seat assembly.

Mar 15, 2011 | 1998 Ford Windstar

1 Answer

2004 Supercrew Lariat no driver power seat or pedal adjust


Maybe, you can diag yourself with a test light and an ohmmeter. These will cost less at sears than having a dealer diag it. Check fuse 109 in the cab, that's the fuse for the driver's seat module. If that fuse is ok, then check power at the module. It's a little black box under the driver's seat with i think 3 connectors. Back probe the dark green wire at the connector with a test light, you should have power, even with the key off. If not, repair the circuit. Clamp the test light to battery positive and back probe the black wire, if the light does not light, repair that ground circuit. Test the memory set switch by measuring with an ohmmeter points 7 and 2, 7 and 6, 7 and 5 resistance should be less than 5 ohms, if not replace it. If all these tests pass, disconnect the connectors from the module and give 12v to the red and white wire. If the seat moves, have the module replaced at the dealer, it will have to be programmed.

Aug 09, 2009 | 2004 Ford F150

1 Answer

1995 Ford WIndstar LX 3.8l power windows do not work.


replace the relay. for power windows for the power seat check fuse and relay.

Apr 08, 2009 | 1995 Ford Windstar

1 Answer

03 passat wagon driver side powerseat


check the connections first / if its still not connecting then it needs a motor for the seat/ Please rate my response thank you very much

Jan 31, 2009 | 2003 Volkswagen Passat

1 Answer

1994 volvo 850 turbowagon power seats


Hey cm_szasz!
Here's a diagnostic procedure for the power seats: http://www.volvoclub.org.uk/tech/service/850/PowerSeats.pdf

And here's a load of wiring diagram including power seats: http://www.volvoclub.org.uk/tech/service/850/SystemWiringDiagrams.pdf

The above links are for '95 models, but as far as I know they're identical.
Get the multimeter out and start checking voltages :)
Good luck mate!

Oct 21, 2008 | 2000 Ford Mustang

1 Answer

Driver powerseat wont work 2000 Lincoln LA


Look under driver seat for any plugs not plug in.

Jul 29, 2008 | Lincoln LS Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...