Question about 2010 Dodge Journey

Open Question

Uconnect paired with new cell phone bell Alcatel but no one can hear me i got can hear them very good what to do

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 Dodge Journey radio music will stream from phone but cannot hear phone call can the radio be reset?


Push the uconnect button and at the same time when the voice
says uconnect ready adjust the volume knob

Apr 08, 2016 | 2013 Dodge Journey

1 Answer

Can I pair my phone with my new car? (Alcatel A382G Tracfone) and if so, what do I do?


You probably can't because it looks like it does not have Bluetooth. If I am wrong and it does, look in the phones settings menu for Bluetooth pairing.

Oct 05, 2014 | 2014 Honda CR-Z

1 Answer

Why won't uconnect work in 2013 chrysler200


There are a few things to note. The pairing has to occur between the Uconnect device in the Chrysler 200 and the Samsung S3 using bluetooth. I noticed there are 4 possible Uconnect systems available. Depending on which one you have you can check the recommended cell phone to go with it. Samsung S4 is defnitely compatible to all of the of them and SIII also with some. But that does not mean SIII will not work with others. It just means it may not have been tested.

Go to this link and select the vehicle model and year and then follow the instructions to get to the correct pairing instruction. If SIII is not listed I would still check S4. Should not be much different.
Chrysler Uconnect

Aug 07, 2014 | Chrysler Cars & Trucks

1 Answer

Reset uconnect


did you RTM yet, the operators guide, and this dont work
and try other phones?
if it really is malfunctioning, then read the FSM for how to service it and not mess up all the other complex stuff. (no year stated so we cant really help you, sorry)
most new cars if you pull the battery , the NAV and Radio Brick.
do not pull the battery cable or end in radio code H3LL.
the FSM cover this.
alldata.com may.
or get the car serviced any time the MAGIC fails or end up with bad magic and a car then dont run, right.
some cars have other calibrations that are lost at battery pull.
dont do it, or post the year.

RTM or get help, for magic.
uconnect is magic.

Jun 18, 2014 | Chrysler aspen receiver, sirius satellite...

1 Answer

Need set-up Information for Blue Tooth phone in Chrysler Pacifia 2005


I found the link below containing a download of the .pdf file and also pasted the phone pairing portion below it. These instructions are exactly the same as when pairing to my system in my '08 Caliber,so they're probably universal. Keep in mind, though, that the system just may not be fully compatible with your phone. EVERYTHING that Chrysler makes is EXTREMELY finicky-and you may be doing everything right! Before you begin, set your phone into its pairing or "find me" mode, then press the UConnect button. I hope this helps! Good luck.
http://dcxtraining1.com/dcxtraining1/docs/ExperienceFreedom_UConnect.pdf

Linking to UConnect – Required for First-time Use of Each Mobile Phone
To complete the pairing process, the mobile-phone owner’s manual will need to be referenced. One of the following vehicle-specific Web sites will also provide detailed instructions for pairing with the phone: www.chrysler.com/uconnect, www.dodge.com/uconnect and www.jeep.com/uconnect.
• Press the Phone icon button to begin
• After the Ready prompt and subsequent beep, say Set Up Phone Pairing
• When prompted, after the voice or beep, say Pair a Phone
• You will be asked to say a four-digit PIN that will be needed later to enter into your mobile phone. You can use any four-digit PIN. You will not need to remember the PIN after the initial pairing process
• For identification purposes, you will be prompted to give the UConnect system a name for your mobile phone. Each mobile phone that is being paired should be given a unique phone name
• You then will be asked to give your mobile phone a priority level between one and seven, one being highest priority. The priority allows the UConnect system to know which mobile phone to use if multiple mobile phones are in the vehicle at the same time
Making a Phone Call
• Press the Phone icon button to begin
• After the Ready prompt, say Dial
• The system will prompt you to say the number you wish to dial
Making a Phone Call Using Your UConnect Phonebook
• Press the Phone icon button to begin
• After the Ready prompt, say Call followed by the name and designation of a phonebook entry you wish to dial – for example Call, then John Doe, then Work
Terminating a Phone Call
To end a call in progress, press the Phone icon button. All calls in progress will
be terminated.
Phone Redial
• Press the Phone icon button to begin
• After the Ready prompt, say Redial
• The UConnect system will call the last number that was dialed on your mobile phone. This may not be the last number dialed by the UConnect system
Answering or Rejecting an Incoming Call - No Call Currently in Progress
When you receive a call on your mobile phone, the UConnect system will interrupt the stereo audio to ask if you would like to answer the call. Press the Phone icon button to answer the call. To reject the call, press the Phone icon button until you hear a single beep indicating that the incoming call was rejected.
UCONNECT
CHRYSLER GROUP TECHNOLOGY 17
moz-screenshot.pngmoz-screenshot-1.png

Dec 29, 2009 | 2005 Chrysler Pacifica

1 Answer

My 2006 Jeep Grand Cherokee uconnect will provide prompts-voice or otherwise so I cannot connect my compatible Samsung Phone. My phone shows Uconnect on screen but when I do search on my phone it fails to...


check jeep.com/uconnect just to make sure the model is ok. Sometime your cell phone provider can update the software to make it work better with the device.

Oct 28, 2009 | 2006 Jeep Grand Cherokee

2 Answers

My 2005 jeep grand cherokee limited uconnect on the rearview mirror dosent work, wondering what i can check to fix this


9 time out of 10 it is the phone not the Uconnect. Try to pair a different phone on the device then see what happens.

Oct 25, 2009 | 2006 Jeep Grand Cherokee

1 Answer

Uconnect auto pairing


Check with jeep.com/uconnect to make sure it is compatible. The phone is the problem 9 time out of 10. The cell phone provider can upgrade the software to make it compatible with the uconnect.

Oct 24, 2009 | 2006 Jeep Commander

Not finding what you are looking for?
2010 Dodge Journey Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...