Question about Mitsubishi Endeavor
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Sounds like the timing belt broke. Unfortunately this vehicle was not equiped with no contact valves so if that is the case you will need to have the engine and Head rebuilt. If the crank position sensor can't sense the position of the crank it should shutdown the electrical to keep you from damaging your engine.
Posted on Oct 09, 2009
Bank 1 sensor 2 is on the firewall side of the engine, and is the bottom O2 sensor (the one furthest from the engine). It is accessed from below the vehicle.
Posted on Jan 08, 2010
did you use aftermarket crank sensor? if so that might be your problem. dealer has several different ones, by providing vin number, but there is only one after market for all optimas 01-05. try to connect thick pink wire and thick orange wire together on the ignition failure sensor. you might have the same problem as me. good luck.
Posted on Jan 15, 2010
Tips for a great answer:
Nov 28, 2016 | 2004 Mitsubishi Endeavor
Feb 09, 2016 | Mitsubishi Cars & Trucks
Nov 01, 2015 | Cars & Trucks
Feb 09, 2013 | 2004 Mitsubishi Endeavor
Sep 28, 2012 | 2004 Mitsubishi Endeavor
Mar 18, 2011 | 2007 Mitsubishi Endeavor
May 01, 2010 | 2004 Mitsubishi Endeavor
Mar 08, 2010 | 2004 Mitsubishi Endeavor
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: