Question about 2001 Ford Explorer Sport
Don't know how to check the sensors or coil pack this was a sudden problem. ran one day wouldnt start next day
Parts stores can test ignition module. You can check ignition fuse and tap on relay. Crank sensor is common failed part, but harder to test. If you know how to access it, you can test for continuity by back probing connector.
Posted on Dec 28, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 Ford Explorer, 4.0 SOHC No
You are at thhe right trail what controls spark is coil pack crank sensor sparkplugs and plug wire but the most important is power . I mean 12 volt connections and ground This includes checking fuses you need a simple volt meter doesnt have to expensive or fancy just to pick up 12 volts let start with fuses in the engine juction box (there not mark to what it belongs to) make sure none are open. especially fuse 19 and 24 , next go to the crank sensor make sure the tabs are snuggly on now to the coil pack there is a red and light green wire this comes from ignition and feeds 12 volts at the coil pack measure that voltage is it 12 volts if not correct it this is from ignition switch ( you can make a tool that feed 12 volt with a wire and a fuse in series and attatch it to battery and the primary wire this is known as hot wire) next go to the ECM wiggle the wires see if that get a connection going if not go back to the ICM here are the wire you are to measure the tan light green, this is from ECM and it is pulsed it measure 5vlts to 0 volts switched then measure the tan orange the same thing 5 volts to zero,then tan white again 5vlts to zero. any one of these 5 to zero fails you fix is the ecm
Posted on Aug 21, 2011
follow this link and take your pick of many diagrams for the crank sensor. http://images.search.yahoo.com/search/images?_adv_prop=image&fr=yfp-t-900&va=2000+ford+taurus+crank+sensor+wiring+diagram
Posted on Apr 06, 2013
Tips for a great answer:
Feb 27, 2015 | 2000 Dodge Stratus
Apr 11, 2014 | 2000 Honda Accord
Jul 19, 2013 | Cars & Trucks
Apr 05, 2013 | 2000 Ford Taurus
Jul 21, 2012 | 2000 Mazda MPV
Jul 20, 2010 | 2000 Jeep Grand Cherokee
Jun 05, 2010 | 2001 GMC Safari
Jan 16, 2010 | 2000 Nissan Sentra
Dec 14, 2008 | 2001 Ford Focus
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: