Question about Mitsubishi Montero Sport

1 Answer

My pajero transfer lever has locked up coming out of 4LL and has locked trasfer in neutral

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Put in forward and subsequently in reverse, problem could be caused by not having all 4 tires the same.

Posted on Apr 19, 2014

  • hotcahoona
    hotcahoona Apr 19, 2014

    tried all that but the tranfer case has neutralised auto and 4wd lever stuck coming out of 4LL.parking pin doesnt engage either because of it.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2926 Answers

SOURCE: Transfer case lever "jammed". 4

Try releasing the 4x4 lever on a slippery surface vs dry pavement. When it was realized the 4x4 would not disengage, was it while driving it in 4x4 on dry pavement?

Posted on Dec 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tranmisson on pajero io has got aproblem when engaged it blinks neutral whe you start to move


sounds like a problem either with the 4x4 switch or the linkage thinking the transfer case is in neutral.

May 02, 2014 | 2001 Mitsubishi Pajero 2.0

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

Grinding noise coming out of rear trasfer case were u joint. is there a bearing in front of the trasfer case that can go bad?


Need better info lots of parts in between rear transfer case also has axles in the cases

Nov 12, 2010 | 2004 Dodge Ram 1500

2 Answers

Can a 1998 4x4 S-10 blazer be dinghy towed?


Yes it can, just place your Transfer Case in Neutral position.
Shifting into NEUTRAL
To shift the transfer case to NEUTRAL do the following:

Make sure the vehicle is parked so that it will not roll.
Set the parking brake.
Start the vehicle or turn the ignition to RUN.
Connect the vehicle to the towing vehicle.
Put the transmission in NEUTRAL (N).
Shift the transfer case to 2HI.
Simultaneously press and hold the 2HI and 4LO buttons for 10 seconds. The red NEUTRAL light will come on when the transfer case shift to NEUTRAL is complete.
Shift the transmission to REVERSE (R) for one second, then shift the transmission to DRIVE (D) for one second, or FIRST (1) for vehicles equipped with a manual transmission.
Turn the ignition to LOCK.
Place the transmission shift lever in PARK (P), or FIRST (1) for vehicles with a manual transmission.
Release the parking brake prior to towing.

Shifting Out of NEUTRAL
To shift out of NEUTRAL:

Set the parking brake and apply the regular brake pedal.
Shift the transmission to NEUTRAL (N) and turn the ignition to RUN with the engine off.
Press the button for the desired transfer case shift position (2HI, 4HI, AUTO 4WD or 4LO).
After the transfer case has shifted out of NEUTRAL the red light will go out.
Release the parking brake.
You may start the engine and shift the transmission to the desired position.
Excessively shifting the transfer case into or out of the different modes may cause the transfer case to enter the shift protection mode. This will protect the transfer case from possible damage and will only allow the transfer case to respond to one shift per 10 seconds. The transfer case may stay in this mode for up to three minutes.

NEUTRAL: Shift the vehicle's transfer case to NEUTRAL only when towing your vehicle.
Good luck and hope this answers your question.

Jan 30, 2010 | 1998 Chevrolet Blazer

1 Answer

Pajero how to use 4wd gair


if your vehicle has manual locking front hubs then you need to turn them to lock first. then it's best to have the car on but not moving and perhaps in neutral gear put in the clutch and using the transfer lever select either low or high range. some vehicles need to go in reverse first before the transfer gears engage; that is usually hiluxes.Don't forget to do this procedure in reverse when returning to normal road driving as it is not good for the car to be driving on the road in 4x4

Oct 10, 2009 | 1999 Mitsubishi Montero

1 Answer

How do you you lock or unlock 4wd on a 2000 land rover discovery


The 1996 discovery is full time 4wd and can only be changed from high to low range using the transfer case shifter with the truck in neutral rolling between 1-5mph. you can also move the same lever left to right to engage the transfer case diff lock

Sep 04, 2009 | 1996 Land Rover Discovery

1 Answer

We were travelling at 70-80 kph in our Mitsubishi Pajero 2000 model Fieldmaster , automatic transmission when our grandaughter accidentally kicked the transmission lever from drive to neutral. The veh


no i do not think its your tran. it could be a dust shield or a heat sheld came lose. it happen to me befor .and the car was fine. ok have a nice day

May 04, 2009 | Mitsubishi Montero Cars & Trucks

3 Answers

Blinking Center Diff Light while vehicle on the move.


The pajero has a limp mode for when there is an issue with the 4x4 system. The ECU apparently limits the vehicles capabilities until the problem is fixed. By turning the car off and on again you are reseting the fail-safe until it again triggers. The fault may be that a part of the drive train, secondary transfer case or auto locking hubs is not working correctly. For my Pajero, the auto hubs were not disengaging. This was later found to be caused by sticking air solendoids. Each solenoids cost was about $200 and there are two for the hubs. I was able to free them up by soaking the solenoids in CRC/ WD40 and a bit inside the air tubes as well plus repeatedly engaging and disengaging the 4x4 lever to activate the hubs. The auto hubs may not be the issue in your case but its worth a try.

Apr 14, 2009 | 2000 Mitsubishi Montero

1 Answer

Pajero IO (auto) Super select 4WD-i problems


Check Linkage for the 4WD transfer case, between the shifter and the case. if it is a direct case mounted shifter, you may need to remove it and check for obstruction.

Have you tried to shift it to 4H while at a slow roll in N? Sometimes that used to work for me in my older floor mount 4WD truck. Give it try!

Feb 27, 2009 | 1999 Mitsubishi Montero

1 Answer

How to engage 4 wheel drive


to engage pull lever back in to 4H and move truck forward 5 or 6 feet then back up a hair the auto locking hubs on the 88-2000 are all like this for 4L put truck in neutral and push lever all the way forward then repeat the moving of the truck to disengage put back in 2H and back up 6- 10 feet and that should disengage going in and out of low range you must have the truck in neutral or you will damage the transfer case

Nov 15, 2008 | 1996 Chevrolet Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...