Question about 2005 Chevrolet SSR

1 Answer

Would not turn over

Car would not turn over and I could not get the key out of the ignition and when I jumped it the key would come out when I shut it off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 45,620 Answers

Have a load test done on the battery as it may have a dead cell. It is probably why you could get the key out when you used a jump battery.

Posted on Apr 21, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 jeep wrangler alarm(avital) goes off and


try resetting alarm lower drivers side window and take out keys,disconnect battery and fully charge it , when you reconnect battery alarm will go off ,put key in drivers side door and turn key all the way open and all the locked 3 times then remove key that should reset alarm.

Oct 08, 2014 | Cars & Trucks

1 Answer

1994 Buick Park Avenue: will not start with out jumping, Replaced the battery, problem remains. Can jump start the car and drive it but when shut down for a few minutes it will not restart using battery...


QUESTION: Without a jump, does the motor crank when you turn the key to "START"?

...

If you can jump start it, then you know you have spark, fuel and compression; you know your starter and ignition are fine.

My guess is a loose/missing connection at the positive battery terminal for your starter.

Feb 10, 2014 | 1994 Buick Park Avenue

4 Answers

My car wont start but has Power


DOES YOUR CAR CRANKS OR IS COMPLETELY DEAD ONLY LIGHTS? IF IT CRANKS AND DOESN'T ENGINE RUN THEN IT IS EITHER THE ALARM ( IMMOBILIZER )SYSTEM ACTIVATED,OR THE IGNITION KEY FAILURE. IF YOU HAVE A SPARE IGNITION KEY TRY AGAIN ( THE KEY TO BE THE ONE WITH CHIP INSIDE ).IF IT IS COMPLETELY DEAD THEN YOU NEED THE ASSISTANCE OF A QUALIFIED PERSON TO DIS ACTIVATE THE ALARM AND CHECK ALSO YOUR SMART KEY AS WELL .

Sep 02, 2012 | 2002 Chrysler PT Cruiser

2 Answers

We bought the car today from a private seller. We test drove the car and shut it off several times in our 30 min test drive. We shut it off at the store and now it will not start. We tried jumping the...


It could be corrosion on the battery terminals. Otherwise, you sometimes can't get a car with a dead cell in the batty to jump start at all. I would call the seller and politely ask their advice.
Treat them with respect, and they will probably be very helpful. Don't start accusing them of things. That just never ever helps.

May 08, 2011 | 1997 Oldsmobile Aurora

1 Answer

Ignition switch does not turn starter on but after replacing celinoid and jumping across celinoid the truck starts right up and shuts off with ignition key how do i replace ignition in column or is that...


That sounds like the ignition in the column. Buy a new ignition and take the column apart. take out the old one and replace with the new. It's a pretty easy job if you're decenty inclined.. let me know of other ??. Or find the hot before the switch and the lead to the starter in the column and put in a push button start. Though then anyone can start the car without a key

Jul 01, 2010 | Cars & Trucks

2 Answers

I have a 1995 bonnneville pontiac, when you turn


did you leave the key in the run possition? if you did not then try again with the key in run. if it stays running then you have problem with ignition fuse, ignition swith or neutral safety swith.
if the car will not stay running then you may have a problem with anti-theft system. to tell if you have that feature, just look at the key to see if there is a little chip on the key near the handle.
if it is then more likely the transponder in the ignition lock cylinder is bad. there are two little wires that broke all the times.

Feb 28, 2010 | 1995 Pontiac Bonneville

2 Answers

Engine starts for 3 seconds and then shuts down, radio,locks,trunk release,interior lights do not work, clock/radio display shows time but nothing from radio


Hi,
This could be a tricky one - so just go through the options methodically untill you effect a repair.

If it has an immobiliser fitted - try using another key. Sometims the chip in the key fails.

If you did anything prior to this problem - jetwashing, using a mobile phone near the steering column, serious work etc - try these areas first.

Check alternator function.
Check fuses.
Check fuel level.
Look for leaks.
Check belts condition.

It is behaving like a major electrical fault. Check the BIG fuses in the engine bay fusebox. After this - check that the ignition switch is supplying a switched live feed when in the "on" position.
It could be a faulty switch contact. Possible if you have uprated lights somewhere.

Sep 30, 2009 | 2001 Chevrolet Malibu

2 Answers

2001 Monte Carlo Turn key on won't turn over, evertything else wo


Is there a security light on, if it is then you have the anti theft working thinking someone is trying to steal the car. If you have the second ignition key's with you try it.  If not try this, it takes about 30 min to do. 30-Minute Learn Procedure 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. 6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password. 7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. Without a scan tool you may have momentary starter interruptions while history clears itself. Good luck and hope this helps, keep me posted, be glad to help

Jun 28, 2009 | 2001 Chevrolet Monte Carlo

1 Answer

Engaging the Starter


Check to make sure that when you turn on ignition switch the solenoid is receiving power to engage the pinion gear and feed power to the starter motor. It is new so I suspect it is not receiving juice. U may have some bad connection causing the intermittent issue. PIA.

Mar 23, 2017 | 1998 Buick Riviera

Not finding what you are looking for?
2005 Chevrolet SSR Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...