- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the output speed sensor is located on the transmission. while standing in front of the vehicle and looking down at the transmission you will see two rubber hoses. under those hoses you will see the input speed sensor. if you look to the right of that sensor, and you may have to look from underneath the vehicle you will see another sensor that is identical to the input speed sensor. That is the output speed sensor. The output speed sensor is the one that shows how fast you are moving on the speedometer.
There are two speed sensors, one is called an input shaft speed sensor and the other an output speed sensor. both control transmission but the out put also controls speedometer,
To replace any of these is not hard, they are bolted on the outside of transmission, you will remove the bolt holding them in and then they slide out, the input shaft speed sensor is located on the front left side of the transmission. the output speed sensor is located on the left side of the transfer case. good day
hi , their is two different speed sensors on your vehicle one is the input speed sensor which is inside the transmission and the transmission will have to be removed to replace it the other one s the output speed sensor is located directly above the passenger side trans-axle shaft. your input sensor is the sensor which tells the transmission when to shift and the output speed sensor tells the speedometer what it should display and both those parts are fairly cheap they are around 15-25 dollars but just remember if your input speed sensor is bad it is gonna cost you a minimum of 1000 dollars to have a mechanic fix as the transmission needs to be removed hope this is what you needed
THE INPUT SPEED SENSOR IS LOCATED JUST TO THE LEFT OF THE OUTPUT SENSOR..ABOUT 2-3 INCHES AWAY..SAME IDEA..2 WIRE PLUG AND IT UNSCREWS FROM TRANSMISSION..YOU WILL PROBABLY HAVE TO REMOVE THE TRANS CONTROLLER AND BRACKET FOR ACCESS..I HOPE THIS HELPS
The speed sensor is on the tailshaft of the transmission,on the passenger side of the car,it has 3 wires. The output sensors are located on the front of the transmission about mid-way up the housing & only have 2 wires. Note the output sensors are not responsible for vehicle speed. Only the output shaft speed is recorded. They are for finding the correct cvi(clutch volume index) only. If you have a cvi issue,the transmission is toast.
I had the same problem, I first replace the output speed sensor, no fix, then the input sensor. Both located under air filter box. Easier to get to all the screws if you remove the battery. Input sensor is facing forward towards the frond end. The output sensor is under the cables linkage, which is directly under the air box facing the firewall.