Question about 2003 Acura 3.2TL
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to disconnect the antenna for the radio it's in the back of the radio DO NOT put the antenna back in until you put in the code i had the same problem :) i hope i resolved your issue
Posted on May 08, 2009
it's a wire from under the dash it usually burns out after awhile,i had the same problem email me at email@example.com for more info on the wire i forgot the name for it.
Posted on Jun 13, 2009
most new acuras have what you call an anti pinch sensors which means when there is an extra load on the power window motor, it is picked up by a controll module and makes the window go back down ie, you get your fingers cought between the window and the door frame. sometimes this happnes by its self because either the window is off track and not going up stright thus putting extra load on the motor. or, the window runner track its self (which is mostly rubber) is mislodged. causing the window not to fully rest in the full up position.
Posted on Jan 07, 2010
Below are the proper steps to removing your vehicle's fuel tank..
Disconnect the negative battery cable.
Relieve the fuel pressure
Remove the rear seat cushion.
Remove the plastic grommet from the floor pan.
Detach the fuel pump electrical harness.
Disconnect the fuel lines from the fuel pump by compressing the tabs on both sides of each nylon push connect fitting and easing the fuel line off of the fuel pump.
Raise and safely support the vehicle securely on jackstands.
Remove the muffler mount.
Remove the heat shields.
Remove the fuel tank cover.
Remove the drain plug and drain the gasoline into a approved container.
Disconnect the fuel lines and remove the fuel filter and base.
Loosen the fuel tank filler pipe clamp at the fuel tank.
Support the fuel tank using a hydraulic jack and a block of wood or other suitable device.
Remove the two fuel tank support strap bolts and position the straps out of the way.
Partially lower the fuel tank to access the fuel tank filler pipe vent tube and disconnect the vent tube and filler pipe from the tank.
Disconnect the fuel vapor tube from the tank.
Lower the tank from the vehicle.
Installation is the reverse of the removal procedure.
Posted on Apr 23, 2010
Tips for a great answer:
Aug 06, 2016 | 2003 Acura 3.2CL
Oct 10, 2012 | 2003 Acura 3.2TL
Feb 05, 2010 | 1996 Acura TL Series
Oct 19, 2009 | 2003 Acura 3.2TL
Sep 21, 2009 | 2003 Acura 3.2TL
Apr 10, 2009 | 2005 Acura TL
Dec 28, 2008 | 2003 Acura 3.2TL
Dec 27, 2008 | 2004 Acura TL
17 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: