Question about Acura Legend
Check to see if anything is around wheel that could be touching wheel while driving. Make sure rim and wheel fender are clean of debris. Possible cv joint failure, but that makes a clicking noise.
If you need further help, reach me via phone at https://www.6ya.com/expert/frankie_091f536560a54e12
Posted on Apr 19, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Grinding noise in the left
grinding on front wheel is caused by 2 things.
a bad or loose wheel bearing,or worn out brakes, have them both checked
You might also want to check the level of fluid in the power steering reservoir - low or lack of fluid will also cause a noise (although more of a whining than a grinding).
Posted on Jul 29, 2008
You have a hub/wheel bearing going out. You need to jack up the vehicle on each side. Grab the top and bottom of the wheel and try to move it in/out at the top and bottom. If this does not work then roll the wheel as fast as you can and see if you can hear which one it is. Good Luck.
Posted on May 13, 2009
That's a hub bearing. Replace the one that's doing it. I'm assuming this 'roar' is coming from the front, NOT the rear.
Posted on Jun 28, 2009
Have you checked the metal clips that olds the brake pads in the front galiper bracket. They usualy rust, break loose and come in contact whit the disc, creating a squeaking noise. Those should be replace since they are needed for the brakes to work properly
Posted on Oct 24, 2009
Tips for a great answer:
Jun 26, 2015 | 2011 Jeep Patriot Latitude
Sep 18, 2014 | 2009 Chevrolet Cobalt
Jan 27, 2011 | 2005 Chevrolet Uplander
Dec 21, 2010 | 2005 Ford F-150
Sep 22, 2010 | Ford Mustang Cars & Trucks
Feb 13, 2010 | 2000 Dodge Neon
Jul 31, 2009 | 2002 Pontiac Aztek
Mar 05, 2009 | 2008 Hyundai Elantra
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: