Question about 1987 Toyota Camry

Open Question

How to replace ac expansion valve on a 1987 camry

Am looking for help changing to 134A system.replacing expansion valve and drier on a 1987 toyota camry.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 1997 Camry Valve Cover Gasket Replacement

Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.

Posted on Dec 15, 2008

michigan man
  • 3533 Answers

SOURCE: Replace the A/C exansion valve

i am not really sure on this but try these websites fix & troubleshoot heating & A/C its www.automedia.com and the other one is car A/c repair www.directgardening.com if you have a autozone near you there you can rent the special tools you will need take them back and get your money back try www.autozone.com

Posted on May 25, 2009

  • 240 Answers

SOURCE: Where is the expansion valve on a 95 Lexus es300

It is attached to the back wall of evaporator. You have to remove the glove compartment, blower unit and evaporator to get access to the expansion valve.

Posted on Jul 04, 2009

  • 1861 Answers

SOURCE: where is the A/C expansion valve located in 94

The expansion valve is located on the AC piping which is in the evaporator box , under the dashboard. The entire evaporator box must be removed to gaiun access to the expansion valve. This is not an 'easy' job.

Posted on Oct 01, 2009

  • 160 Answers

SOURCE: where is a/c expansion valve on a 1995 toyota

in the center of dash you can acess it by removing theglove box, blower housing,ecu,then using a 5mm allen head socket

Posted on May 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the drier receiver on a 2006 Toyota Highlander


Yes, the cartridge is on the side of the condenser. It can be replaced without replacing the condenser. The expansion valve is on the firewall where the lines go to the evaporator.

Nov 01, 2014 | 2006 Toyota Highlander

1 Answer

Is the TX valve the same as an expansion valve for a Toyota Camry 1994?


Yes, Thermal Xpansion valve. Failure can certainly involve sticking shut. Locations shown here, p8 and p53. The receiver drier would be routinely replaced if the TX valve had failed that way.

http://www.turboninjas.com/camry/ac.pdf


http://www.freeasestudyguides.com/ac-receiver-drier.html

Dec 16, 2012 | 1994 Toyota Camry

2 Answers

Where is the expansion valve located on the 2004 KIA Sedona


Kia Sedona expansion FRONT valve located under dash, behind glove box, fan and coil. Evacuate freon first. Disconnect Freon lines from firewall., Lay right front seat back to flat horizontal position and lay on top or totally remove the seat for easier working access. Remove under dash cover, fan, glove box, coil housing, remove coil mounting bolts, remove old expansion valve. (Inspect old valve, if debris inside, blow out coil before installing new valve. If visible debris best to consider replacing REAR expansion valve and DRIER/FILTER in front of radiator too and blow out all lines and coils while servicing.) Use compressor oil to lubricate "O" rings on new FRONT or REAR expansion valve, install valve bolts, reinstall coil bolts to FRONT firewall or REAR frame, reconnect freon lines to firewall in engine compartment. Evacuate AC system, install freon (35 1/2 ounces, nominal 3 pounds), check system for leaks, check for proper operation, enjoy.

Sep 12, 2012 | 2004 Kia Sedona

1 Answer

How much does it cost to replace a expansion valve on 2000 camry


I think It costs $45 plus to replace a expansion valve. Here you can find more quality expansive
valve http://www.carpartswarehouse.com/part/ac-expansion-valve.html

Aug 16, 2011 | 2000 Toyota Camry

4 Answers

What type of freon is in GMC trucks of 1987?


R12.... In 1994 R134a was required, but some changed earlier. Yours may have been converted. If the service ports are threaded it still has R12. Hope this helps.

Jul 05, 2011 | 1987 GMC R1500

1 Answer

Where is the a/c expansion valve located on the 87 toyota camry?


It is inside the blower box with the expansion valve

Aug 04, 2010 | 1987 Toyota Camry

1 Answer

1987 TOYOTA CAMRY AC AMOUNT FROM R 12 TO R134


The best way is to use the amount that was for 12 as a guild and use the pressure gauge as the test the low side should be just high enough to keep the compresser running with the engine reved up ( highway speed constant) it will be right at the low end of the blue end of the gauge and it should stay below the high end of the blue at idel. if it goes too high it won't cool very well or not at all. The more freon after youhit staying on the less cooling you'll get so try to put in as little as possible just to keep it on and it'll be as cool as it will get. ( not very good ) The old cars don't cool very well on 134A. A new compressor and a comdenser for 134A and the expansion valve too and they still doen't do very well. Make sure everything is as clean as you can get it ( raditor, condenser, Grill, Fan, (running fast). and it might get cool enough that you'll drive with the windows closed ( it's that bad). The cars too old to go though changing all the parts too the sizes that work good in the 93 and newer Camery. And the fitting of these sizes of parts may not really work.

Jul 23, 2010 | 1987 Toyota Camry

2 Answers

99 Toyota Tacoma a/c reads high pressure on low pressure side


Does the compressor run?
Low side could be high without a running compressor.

A running compressor?
The expansion valve itself is about $50 and bolts in.
You will have to remove the 134a gas before installing a replacement expansion valve and vacuum the system before recharging.

Sep 07, 2009 | 1999 Toyota Tacoma PreRunner

2 Answers

Xespansion valve


Proper spelling is expansion valve and they are typically on the ac compressor

Jul 24, 2009 | 1995 Toyota Camry

2 Answers

Replace the A/C exansion valve


The expansion valve is located in the thin ac line which is the liquid line. The location on your car to me is unknown for I never worked on one

May 25, 2009 | 1995 Toyota Camry

Not finding what you are looking for?
1987 Toyota Camry Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...