Question about 1992 Dodge Daytona
Cant figure out how to replace the tail light
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 dodge neon tail lights inop
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.
Posted on Dec 31, 2008
There are 3 machine bolts that hold the big white part of the head light to the truck. These bolts are black and I think 7/16 but not completely sure, maybe 12mm or so. You'll need sockets, ratchet and a really long extension. Two regular extensions won't reach the bottom one. You get to all three of them from the front of the truck straight in. Once those are out, the head light assembly pulls forward and can dangle from about 10-12 inches of extra wire. This is attached to the bulb harness. 1/3 of a turn and the wire and bulb come out of the head light. Pop the new bulb back in WITH GLOVES, do not touch those halogens. And put it back together. You can use peanut butter in a deep well or regular socket to hold the screws in to get them started, or the rag thing.
It took me 14,607 hours to find these bolts and about 10 minutes to do the job! Hope it helps out!
Posted on Feb 25, 2009
popohead, if people thought it was easy, they wouldn't be here asking. Your reply is useless.
To remove the pins, look a them closely. Notice that there's two little notches cut into the cup that holds the pin. Use a flathead on each side to leveredge them out a little. If that doesn't work at all, you can use a pair of pliers to firmly grip the head of the pin and pull straight out. Quick firm pull.
Once the first pin comes out, the second pin should easily come out. At that point, firmly grip your taillight housing, and pull straight back: Don't try to wiggle it out, and don't try to lift it to one side or the other like a trunk or door. Just pull it firmly straight back like you would a dresser drawer.
Once it's out, the little wiring harnesses come out of the taillight housing with about a 1/4 turn, and the bulbs just slide straight out of those.
Posted on Nov 01, 2009
Open hatch. Remove the 2 push bolts with trim tool or small screwdriver. Rotate the taillight housing to the outside of van. Don't brake tab off of housing. Squeeze connector to remove blub. There is a fuse for each taillight also, under the hood.
Posted on Jan 20, 2010
Tips for a great answer:
Apr 18, 2016 | Dodge Cars & Trucks
Feb 25, 2016 | 2006 Dodge Durango
Oct 16, 2015 | Dodge Cars & Trucks
Apr 19, 2014 | 1992 Dodge Daytona
Apr 15, 2010 | 1986 Chevrolet Camaro
Mar 11, 2010 | 2004 Dodge Dakota
Oct 18, 2009 | 1988 Dodge Daytona
Apr 09, 2009 | 1991 Dodge Dynasty
Jan 17, 2009 | 2001 Dodge Ram 2500 Truck
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: