Question about 1996 Honda Civic del Sol
Do you know the motor that was in there before and do you have the y8 ecu?
Posted on Apr 27, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Anything that is OBD 1 or newer if you want it to be legal, here are the most common options and the basic requirements. 1. B16A2/3: Completely bolt-in Swap, VTEC needs to be wired, SIR II, Hasport shift linkage. Del Sol VTEC for the del sol 2. B18B: Completely bolt-in swap, SIR II, Hasport shift linkage. Del Sol VTEC for the del sol 3. B17A: Completely bolt-in swap, cable-hydro transmission kit(not recommended) or hydraulic b-series transmission, VTEC needs to be wired. 4. B18C1: Completely bolt-in swap, VTEC needs to be wired. 5. B18C5: Completely bolt-in swap, OBD conversion, VTEC needs to be wired. 6. B16B: Completely bolt-in swap, OBD conversion, VTEC needs to be wired. 7. H22A: Mount kit required, Hasport shift linkage, VTEC needs to be wired. 8. B16A: Not recommended! Too much work, more costly compared to B16A2/3's. 9. D16Z6: Completely bolt in, VTEC needs to be wired. 10. D16Y8: Completely bolt in, VTEC needs to be wired. If you want to know more check this out - http://hondaswap.com/swap-articles/en gine-swaps-101-a-29052/
Posted on May 18, 2008
SOURCE: engine lacks power
I have a similar problem. Engine light is on and I notices a lack of power by overcoming. I`ve tried to disconect battery and reconect after a half of minute. Result is, no lights again but still a lack of power.
Posted on Sep 17, 2009
Remove the door handle with one #2 phillips screw, push forward. Push the 2 plasic clips on the release handle and the lock rod by rotating them away from the open end of the clip (clockwise for drivers side, counterclockwise for passenger side). Pull the lock rod and relese out of the clips. Remove the phillips screw in the bottom of the door grab handle. Remove the small black plastic piece on the upper forward corner of the door panel. Remove door panel, should be aproximately 10-12 clips. Once off, you'll see the window motor. Remove the outer window trim. Yes, you WILL break all the clips. I've not had much sucess no matter how careful I am. Use a 10mm wrench or socket to remove the window from the window regulator. You'll see 2 white plastic wedges with 10mm head bolts in them. Pull the window out of the track. If needed, loosen or remove the rear guide track. There also are two 10mm bolts holding the guide rail in. Remove the windoe regulator and motor assembly with (I believe) 3 10mm bolts. Once on the bench, remove the motor from the regulator and reinstall!
Posted on Dec 10, 2009
Tips for a great answer:
Nov 03, 2015 | Cars & Trucks
Jan 03, 2014 | 1994 Honda Civic Del Sol
Nov 30, 2010 | 1994 Honda Civic Del Sol
Jul 28, 2010 | 1997 Honda Civic del Sol
Jul 13, 2010 | 1994 Honda Civic Del Sol
Apr 16, 2010 | 1997 Honda Civic
Feb 12, 2010 | 1994 Honda Civic
Nov 20, 2009 | 1991 Honda Accord
May 18, 2008 | 1995 Honda Civic del sol
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: