Question about 2002 Ford E350

1 Answer

I want to disable the abs on my 2004 ford E450

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Not sure why you'd want to do that, but it is a fairly simple thing to do. All you need to do is unplug one of the wheel sensors. Usually the plug is just inboard of the wheelwell. Follow the wire from the hub back and you should find it. ABS systems have self-diagnostics and if they sense a problem (which unplugging the sensor will certainly create), the system reverts to a limp-home mode, which basically bypasses the ABS function. The dash light should come on steady, indicating the "problem", but the brakes will operate normally, less the anti-lock function.

Posted on Apr 18, 2014

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 518 Answers

SOURCE: 2002 ford E450 abs light stays on after replacing

On OBD2 vehicles,1996 & up, You need to disconnect battery for an hour or two to discharge memory in computer. Let it sit disconnected for 2 hours. If you cured the problem it will be out & stay out. If it is on there still is an abs problem. Make sure all abs sensors are connected properly & no broken or crimped wires in their harness.

Posted on Jun 13, 2010

  • 1 Answer

SOURCE: 2004 e450 ford truck -

did you check to see if you had batteries in it???

Posted on Oct 15, 2010

  • 3 Answers

SOURCE: 2004 Ford E450 sd linkage

Give me some more information about this problem. May be i can help.

Posted on Jul 15, 2011

jaysonemanme
  • 500 Answers

SOURCE: what transmision oil to put in 2004 ford e450 super duty

Mercon SP

Posted on Mar 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to find a wire that provides power only when the key is on for a 2004 ford e450.


usually you can piggyback a circuit right at the fuse block. you need a volt meter to tell if it is a circuit on or off with the key only

Apr 23, 2015 | 2004 Ford Super Duty F 450

1 Answer

Why is my abs light on


Most likely an ABS brake sensor on either the front or rear brake calipers. This is a common failure. Tire store can check and replace. I don't recommend tinkering with this yourself for safety reasons. Also be advised that if ABS light is on ABS system is probably disabled meaning the wheels will lock up rather than pulse or anti lock if you jam on the brakes possibly causing loss of control. You should have any ABS problems fixed ASAP.

Jul 08, 2014 | 2004 Ford Explorer

1 Answer

2004 e450 ford truck - no power to radio.


did you check to see if you had batteries in it???

Oct 15, 2010 | 2004 Ford E Series

1 Answer

2002 ford E450 abs light stays on after replacing Front rotors & hub assy. I disconnected neg. battery treminal with no luck to reset. Can you help? troubled


On OBD2 vehicles,1996 & up, You need to disconnect battery for an hour or two to discharge memory in computer. Let it sit disconnected for 2 hours. If you cured the problem it will be out & stay out. If it is on there still is an abs problem. Make sure all abs sensors are connected properly & no broken or crimped wires in their harness.

Jun 13, 2010 | 2002 Ford Super Duty F 450

2 Answers

My abs light stays on on my ford focus


when the ABS light stays on it means there is a fault present in the ABS system and the ABS has been disabled, as long as the light is on u just have regular brakes with no ABS, there are many thinbgs that can turn the light on, most common is one of the wheel speed sensors is defective, since these sensors are about $75-100 each and there are 4 of them guessing is a poor idea, so what u need to do is have the ABS systwem tested, there will be a fault code present to help narrow down the defective part or wiring.

Dec 28, 2009 | 2004 Ford Focus

1 Answer

The ABS light is on. Which fuse position controls this?


Be sure to check fluid level in brake master cylinder, this also trips that light. you really do not want to disabl the abs,do you?

Sep 18, 2009 | 2004 Ford Explorer

1 Answer

Motorhome swaying


I installed Bilsteins on my 2004 E450 based Class C and they helped reduce sway noticeably. However, the most significant improvement came after replacing the OEM sway bars with Hellwigs. The coach now rides essentially flat.

May 23, 2009 | Ford E-Series Cars & Trucks

Not finding what you are looking for?
2002 Ford E350 Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...