Question about 1994 Toyota Pickup

1 Answer

Harmonic balancer bolt which way do you loosen the bolt on a 1994 toyota truck

Posted by on

  • randy waggoner
    randy waggoner Apr 21, 2014

    thank you very much, However I still couldn't free bolt. Use an impact wrench and 3/8 breakerbar

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 64 Answers

Turn the bolt counter clockwise. It is probably a very high torque bolt, p in excess of 200 foot pounds. A 1/2" breaker bar and a cheater pipe will break it loose.

Posted on Apr 18, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dnewcombe1
  • 1564 Answers

SOURCE: how do you remove/replace the harmonic balancer

One of my little tried and true methods is to take a 1/2 inch or 3/4 inch breaker bar, slide a piece of pipe over it and after choosing the correct size socket for the bolthead. Place the breaker bar and extension on the frame and have someone turn the engine over 2-3 times with the key and this will break the bolt loose.

Posted on Feb 28, 2010

  • 1146 Answers

SOURCE: 1994 toyota camry harmonic balancer bolt will not

Hi:
Those bolts can be extremely tight, and the hardest part is holding the engine from turning. You often need a impact gun, or breaker bar, and I have had good success holding the engine with a chain type wrench, and protected the outside of the damper pulley with a piece of old belt.

Posted on Jan 29, 2010

  • 1 Answer

SOURCE: cannot fit pwer steering belt toyota tercel 1994 with a/c

i got a reply from my post that helped me

thanks for your reply

Posted on May 12, 2009

c1apton15
  • 3400 Answers

SOURCE: Torque settings for water pump

18ft lbs for waterpump bolts & 80ft lbs for balancer bolt

Posted on Feb 21, 2011

  • 1212 Answers

SOURCE: how to change the harmonic balancer on a 3.0 toyota truck

The bolt is usually toqued to 150 foot pounds, or in the realm of 200 newton meters. torque and turns opposite engine rotation In your case counter clockwise (unless Toyota put an engine in that rotated counter clockwise- in which case the bolt would come off in a clockwise direction) If you do not have an impact wrench available, with care, locate a breaker bar on the frame rail of the truck with the socket engaged on the bolt and fully seated- bump the starter and it should loosen the bolt. You want to use great care as the wrench may pop off the bolt head with great force. This is why you want to locate the breaker bar carefully, so if it does fly off, damage to tool or truck will be minimal. In short- stand back and keep people away when you do this.

Once loose, remove the bolt and depending what type of puller you have- one that engages the threaded holes on the inner web of the balancer is best, you m ay need to install the bolt without washer to give the puller something to push against. An external jaw type is not going to do anything other than pull the outer ring off the web.

Posted on Jan 15, 2012

Testimonial: "Thank you for your help. My husband has broke several tools trying to get this bolt to break loose he dose't know if the people that owned the truck before us may have used lock tight on it can he put heat to the bolt to break it loose?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs for the harmonic balancer on a 1994 buick roadmaster


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Oct 18, 2016 | 1994 Buick Roadmaster

1 Answer

How to remove harmonic balancer on my 2000 toyota celica gt 1.8l


you need to loosen the alternator to get the belt off then undo the bolt on the harmonic balancer. If you can't remove the harmonic balancer with a few prys you'll need a puller. When putting it back on you'll need to line up the key with the groove in the crank. Once that's done put the belt back on push the alternator back and do up the bolts

Oct 12, 2016 | 2000 Toyota Celica

2 Answers

Torque spec for 1RZ harmonic balancer


how can i set a toyota 1rz engine on timing

Jul 19, 2012 | Cars & Trucks

1 Answer

Replace timing chain


remove radiator and hoses, remove enough accessory brackets to get to water pump, remove waterpump & harmonic balancer, take timing cover loose,loosen oil pan bolts(take about the first 3-4 completely out and loosen the rest), reinstall harmonic balancer bolt and line up timing marks. cylinder #1 at top dead center and valves for cylinder #1 closed. remove harmonic balancer bolt and remove cam gear bolts and crankshaft gear, install is reverse order..

Nov 28, 2011 | 1984 Oldsmobile Delta 88

1 Answer

I need the location of the harmonic balancer on my 2.2l Ecotec engine. Car is 2004 Chevrolet Cavalier LS.


CRANKSHAFT PULLEY IS THE HARMONIC BALANCER.YOU NEED THESE TOOLS TO REMOVE HARMONIC BALANCER, YOU NEED HARMONIC BALANCER REMOVER AND INSTALLER TOOL.YOU NEED A LARGE PIN SPANNER WRENCH TO HOLD HARMONIC BALANCER IN PLACE WHILE LOOSEN THE HARMONIC BALANCER BOLT.

May 21, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

How do i remove harmonic balancer & replace


YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY WHEEL HOLES TO KEEP ENGINE FROM TURNING WHEN YOU LOOSEN THE HARMONIC BALANCE BOLT. ALSO SCREW DRIVER AND PUNCH CAN KEEP ENGINE FROM TURNING WHEN REMOVER THE HARMONIC BALANCER. YOU WILL NEED A HELPER TO HOLD PUNCH OR SCREW DRIVER WHILE YOU LOOSEN THE BOLT. YOU CAN GO TO SEARS OR ANY AUTO PARTS STORE AND BUY HARMONIC BALANCER PULLER.TORQUE HARMONIC BALANCER BOLT TO 76 FT LBS.

Apr 23, 2011 | 2003 Pontiac Montana

2 Answers

Need to replace the harmonic balancer in a 1994 isuzu rodeo. ( rwd, 3.2 ltr v.6 ). no success so far. is the main bolt reverse threaded? so far i have been attempting to turn it toward the passenger side,...


No, the bolt is not left handed. You do need to turn it counter-clockwise to loosen it. You're probably just spinning the engine when trying to loosen it. I use a 6" c-clamp and attach it behind the balancer in a way that the threaded shaft can lodge up against something so the engine can't turn. Then I use a 3 lb rubber mallet and hit the 1/2" drive rachet on the handle, or put a breaker bar on the end of it and work it loose that way. Once you get the bolt off, you will need to use a pulley puller to get the balancer off.

Mar 19, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

I need a how to to change harmonic balancer for 1995 nissan maxima. step by step


First remove right front tire and support vehicle with a jack stand. Remove splash guard lower portion near the harmonic balancer. Remove all drive belts. First remove the A/C alternator belt. Loosen the 14mm bolt at the front of the belt tenioner and then loosen the tensioner bolt (it is the one that stands out, you use a socket on it.). The power steering adjuster bolt with be gained from the bottom. It has a 12mm bolt head on it. You will break the jamb bolt loose first and then loosen the adjusting bolt. Pull down on the belt the help move it after you've loosened it some.Then remove harmonic balancer bolt (19mm).If the harmonic balancer will not slide off the crankshaft then use a two finger gear puller. Place the harmonic balancer bolt back in the crankshaft but do not tighten it. Leave it about a half inch from being all the way in. Next place the puller onto the harmonic balancer (one finger on each side securely press into the belt groove. The center puller bolt will rest against the harmonic balancer bolt head. Tighten the puller bolt and make sure the harmonice balancer bolt does not turn. The balancer should come off at this point.

Aug 26, 2009 | Nissan Maxima Cars & Trucks

1 Answer

Lost bolt for harmonic balancer what size is it? Why did it come off?


I have seen this and you can be glad if the balancer didn't move and damage the crank or t-belt area. Get another bolt and torque it correctly.

Jun 06, 2009 | 1994 Toyota Pickup

2 Answers

Harmonic balancer


what are the steps to removing a harmonic balancers

Oct 18, 2008 | 1997 Chevrolet Corvette

Not finding what you are looking for?
1994 Toyota Pickup Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...