Question about 1999 Ford Taurus

2 Answers

Replace oil pan gasket on 1998 chevy s10 4.3L

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

I totally agree with jrk05a...I don't know why these other guys are mentioning things like bearing leaks and valve cover gaskets unless I didn't get the whole question!?...whenever you have an oil leak, always look for the highest point on the engine and the front of engine as any leak in the front part of engine will blow the oil backwards all over the engine and you'll never know where its coming from...look for any suspected oil leak at the highest part of engine stating in front...

Posted on Apr 22, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 31 Answers

I agree with rottweiler10 go with tat advice and you will be good

Posted on Apr 19, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 61 Answers

SOURCE: Oil Pan Gasket

Before removing the oil pan, drain all the oil from the car. You should be able to remove the pan with basic tools, not sure what socket size though. Once you have the pan off compare the new gasket with the new one to make sure it is the right one. Scrape off the old gasket and replace with the new using a high temp gasket sealant to attach the gasket. Bolt back on to the engine refilling with new oil and checking for leaks. NOTE: your oil pump is protected by your oil pan so be careful not to hurt while sliding in and out of place

Posted on May 09, 2009

  • 43 Answers

SOURCE: 1984 F150 302 Had oil pan gasket and both valve cover gaskets

If you have oil coming down between the transmission and the engine where they meet your problem is with the rear main seal. It seals the back of the crankshaft so no oil comes out. Over time it tends to leak especially if the oil changes haven't been done on time or you live on dirt roads. Where the transmission and engine meet there should be a metal shield but it may be already removed. Just pry that back and see if there is oil. Depending on the color tells your rear main seal for the engine or the front seal on the transmission. Hope that helps.

Posted on Jul 20, 2009

emissionwiz
  • 76109 Answers

SOURCE: 2000 ford focus oil leak

Sounds like the valve cover gasket, clean off all the oil on the engine with a pressure washer or a steam cleaner and then drive it and recheck for the leak, that way you can pin it down for sure.

Posted on Oct 19, 2009

  • 81 Answers

SOURCE: Can you replace an oil pan gasket on a 1995 Ford

my opinion is to do an oil change while you are at it to save some stress. draining the old oil will help from having to hold the pan full of oil and tipping it over, etc. then simply take off the bolts, which should be anywhere from8-12 or so. make sure you clean both sides of the pan. the lip and the side thats on the block. place the new gasket on the pan and put four nuts [corners are best] finger tight. then insert the rest of the bolts and make sure you dont over torque!!!

Posted on Oct 30, 2009

  • 54 Answers

SOURCE: Oil Pan Gasket Leak

you oil pan bolts of the bottom of the oil resivour the gaskit fits in between the surfaces where the pan meets it creating a seal witch in your case needs to be replaced this procedure replaces that gaskit to create a new seal

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing oil pan gasket 1998 chevy silverado 305 cu.in.


REMOVAL PROCEDURE
  1. Remove the oil level indicator tube.
  2. Raise the vehicle.
  3. Remove the engine oil and the engine oil filter.
  4. Remove the oil filter adapter.
  5. Remove the starter.
  6. Remove the flywheel inspection cover.
  7. Remove the engine mount through bolts.
  8. Raise and support the engine.




  1. Remove the oil pan nuts and bolts. Note the location of any studs to assist reassembly.
  2. Remove the engine oil pan and the gasket.
  3. Clean all sealing surfaces. Refer to Oil Pan Clean and Inspect under Engine Unit Repair.
INSTALLATION PROCEDURE


  1. Install the engine oil pan and a NEW gasket. Refer to Oil Pan Installation under Engine Unit Repair.
  2. Lower the engine onto the mounts.
  3. Install the engine mount through-bolts.
  4. Install the starter.
  5. Install the flywheel inspection cover.
  6. Install the engine oil filter and the engine oil.
  7. Install the oil filter adapter.
  8. Install the oil level indicator tube.

May 04, 2015 | 1998 Chevrolet Chevrolet silverado

1 Answer

1998 chevy s10 ****** pan depth


there is only one pan casket 2.2 or 4.3 is still the same for the transmission for the oil pan( os34300c felpro )

Apr 19, 2013 | 1998 Chevrolet S-10 Pickup

3 Answers

Need to replace oil pan gasket for 1996 Ford F-150 2wd, I-6


Yes you can do it yourself.
Its not very easy,but with basic Auto repair tools the task can be easily completed.

=========
There are few help links with solutions to complete these task.
I suggest you to refer these links and view its procedure.

-------
Click the link below:----
------------
How to Replace an Oil Pan Gasket?
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pan-gasket.html
-----------

KIA Sportage leaking oil from oil pan?

Go to Newly Launched

FREE Car repair gu
obyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html" http://howtobyme.blogspot.com/2011/11/kia-sportage-leaking-oil-from-oil-pan.html
----------------
Oil pan Gasket on 1998
Toyota Tercel?
http://howtobyme.blogspot.com/2011/11/oil-pan-gasket-on-1998-toyota-tercel.html

-------------
VALVE COVER GASKET REMOVAL GUIDE http://technoanswers.blogspot.in/2012/06/valve-cover-gasket-removal-guide.html
--------- Car oil leaks from valve cover gasket? http://schematicsdiagram.blogspot.com/2011/12/car-oil-leaks-from-valve-cover-gasket.html

------------
How to replace Oil Pan on 2008 Honda Odyssey?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pan-on-2008-honda.html

-----------
How to replace Oil Pressure Sensor on 2008 Honda Odyssey?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-oil-pressure-sensor-on.html

------------
2004 Chevrolet Express Van: Oil pressure sending unit replacing? http://whoisbyme.blogspot.in/2012/06/2004-chevrolet-express-van-oil-pressure.html
-------------
HOW TO REPLACE AN OIL PUMP
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pump.html
-------------
HOW TO CHANGE ENGINE OIL AND FILTER
http://schematicsdiagram.blogspot.com/2011/07/how-to-change-engine-oil-and-filter.html
--------------
HOW TO REPLACE AN OIL PRESSURE SWITCH (SENSOR)
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pressure-switch.html


-------------

How to Check Differential Oil Leaks and Replace Oil
http://schematicsdiagram.blogspot.com/2011/07/how-to-check-differential-oil-leaks-and.html
-----------
HOW TO PERFORM A BASIC ENGINE TUNE UP-OIL CHANGE
http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up-oil.html

----------
HOW TO RESET OIL CHANGE INDICATOR? http://whoisbyme.blogspot.in/2012/07/how-to-reset-oil-change-indicator.html

------------
These details will help.
Thanks.

Nov 25, 2012 | Cars & Trucks

2 Answers

I have no oil pressure on the gauge on the dash board and it is leaking oil under neath the engine what could it be. 97 chevy silverado 2500 4by4


Could be a broken oil pressure sending line or something worse.... Hole in oil pan, broken/missing (blown-off) oil filter.

Sep 27, 2010 | Chevrolet Silverado 2500 Cars & Trucks

3 Answers

How much will it cost for a mechanic to change oil pan gasket on my 1998 chevy blazer 4wd big v6 engine?


Gasket = $35 (permatex rubber)
Labor - my manual says 3 hours.
You'll have to be responsible for figuring out the labor price per hour depending on where you are located.
In MI, a garage is about $50/hr, and dealership = $85/hr
CA might be $95/$150/hr.

Parts are minimal on the job - its all labor.
Figure in about $20 for shop supplies... gasket remover, sealant, rags, etc.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Jun 02, 2009 | 1998 Chevrolet Blazer

2 Answers

Oil leak in my 98 mazda protege


Could be a rear main seal.

Apr 02, 2009 | 1998 Mazda Protege

1 Answer

Oil pan gasket replacement


It shouldn't be hard on that car as the oil pan is exposed. Unplug the oil plug and drain the oil. Then unbolt the oil pan, clean off the old gasket and replace. Make sure you scrape both the pan and the block clean thoroughly and then bolt back up. Don't forgot to replug the drain plug.

Mar 12, 2009 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
1999 Ford Taurus Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...