Question about 1995 Toyota Camry
My 1995 camry engine cranks but does not start. all the fuses are good.fuel pump gives runing sound when i turn the key to start .Distributor coil is producing spark.battery is good.what else i need to check.
Check the fuel pressure. Then compression at the cylinders. My bet is fuel. Could be fuel pressure regulator and fuel filter.
Posted on Mar 27, 2015
First crankshaft sensor, also called engine speed sensor, next cam shaft sensor.
Posted on Apr 19, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 1995 camry has no ignition fire
I think for sure that the timing belt has jumped a tooth. This can happen if your water pump, or your idler pulley, which are driven by the timing belt, "locks up" for a second. Best advice: replace the timing belt (you should not "reuse" it, as once it slips a tooth, that tooth is now weakend. Also, check the feel of the water pump impeller-gear...if it feels gritty or does not spin freely, replace the water pump while you are in there. It's not much more work. Also check the IDLER pulley for the same feel. If it feels bad/does not spin free, replace it. One or the other caused your problem.
Let me know how it turen out.
Posted on Nov 29, 2008
I would definately check the fuel pump relay, should be located in power distribution box in your vehicle, you may be able to switch it out with a relay of the same type to see if it turns on the fuel pump, but you may need a new fuel pump if this doesn't fix it. Hope this helps.
Posted on Mar 10, 2009
there is no crank sensor on this vehicles 2.0L. If you have power to the coil, new coil, cap and rotor try this if not done yet>>>Unplug coil power first....Try pulling off the distributor cap, and make sure the rotor is spinning with the cam...If this fails to spin, inspect the entire distributor assembly. If it passes, Inspect all the power circuit and wiring to the dist assembly, if ok possible ecu. i recommend having a mechanic check it out!! Hopefully this helps...please rate...thanks
Posted on Aug 11, 2009
Along with the fuze, there is also a relay in the system. If the relay is defective you will not have any power to the pump. Best to check for current at the pump connector (near or at the fuel tank) with either a test light or volt meter. If you have power, the pump is bad. if not, check the relay and retest.
Hope this helps
Posted on Aug 21, 2009
Tips for a great answer:
Sep 24, 2014 | 1995 Toyota Camry
Apr 20, 2014 | 1996 Toyota Camry
Apr 18, 2014 | 1995 Toyota Camry
Sep 20, 2013 | Oldsmobile Cutlass Ciera Cars & Trucks
Oct 06, 2012 | Maserati Quattroporte Cars & Trucks
Feb 17, 2018 | 1995 Toyota Camry
Apr 23, 2011 | Mazda B2600 Cars & Trucks
Dec 16, 2010 | 1990 Toyota Camry
340 people viewed this question
Usually answered in minutes!