Question about 2005 Ford Ranger Regular

Open Question

Ford Ranger 2005 does not go into passing gear

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 315 Answers

SOURCE: diableing 2005 Ford Ranger back up warning device

A big hammer. :P

Posted on Aug 14, 2009

Ad
  • 291 Answers

SOURCE: no heat in cab in ford ranger 2005 tied heater

check if both heater hoses going into firewall are hot.. if only one is hot then your heater core is stopped up..you can take both lines loose and take a water hose and back flush,,, force hose on one inlet of heater core for a minute and then the other.. keep going to you get a good flow...make sure heater valve is open, not just valve position take loose and confirm clear..last make sure your thermostat is not stuck open keeping engine from comming up to temperature

Posted on Jan 04, 2010

  • 1 Answer

SOURCE: 2005 ford ranger very noisey differential sounds

I've come across the same problem with mine it also rattles when coasting. i pulled the diff cover off and found lots of metal shavings inside i had the rear end off the ground so i could spin the wheels. theres a shaft that the planetary gears ride on i nothiced that wiggles when i turn the wheels.... that shaft has been getting worn down, perhaps this is the same issue you have...

Posted on Jul 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a 2005 Ford Ranger Diesel that will splutter and run rough when you try and pass another vechile. It only happens when going up a hill or you try and pass


Does the transmission downshift at the right time? Look for a cracked vacuum line from the pump down to the transmission. If you get a lot of smoke when trying to pass, the injectors could be dirty. Try an injector cleaner in the fuel tank first. If it doesn't clear up then an injector service is likely.

Apr 15, 2017 | Ford Ranger Cars & Trucks

1 Answer

Passing gear


My father has a Ford Ranger when when time comes to pass another vehicle it does not drop on the passing gear everything else i normal, what could cause the passing gear to not engage

Jan 04, 2014 | Nissan Pathfinder Cars & Trucks

2 Answers

How much does a 2005 Ford Ranger fuel pump cost?


hi go to this site it seems to be reasonable for parts for ford rangers...hope this helps please vote thanks...just click link below
http://www.partstrain.com/ShopByDepartment/Fuel_Pump/FORD/RANGER

Jun 09, 2010 | 2005 Ford Ranger

1 Answer

2004 Ford Ranger Automatic - While highway driving if I give my truck too much gas when trying to pass it slips into natural. If I let up on the petal, it will go back into gear.


This is typical of the transmissioin or motor mounts being busted or loose & as the drivetrain shifts position from the load change, so does the shift position causing the change from one to the other. good luck.

Jan 31, 2010 | 2004 Ford Ranger

1 Answer

2005 ford ranger very noisey differential sounds like ring gear pinion on pull side noise comes in at 40mphg thru about 50mph


I've come across the same problem with mine it also rattles when coasting. i pulled the diff cover off and found lots of metal shavings inside i had the rear end off the ground so i could spin the wheels. theres a shaft that the planetary gears ride on i nothiced that wiggles when i turn the wheels.... that shaft has been getting worn down, perhaps this is the same issue you have...

Jan 28, 2010 | 2005 Ford Ranger

1 Answer

2005 ford ranger 4L 4x4 overdrive does not engage when button on shifter is pushed. I also do not see the light on the cluster on


If you have it in 4 LOW, you would never need overdrive. Overdrive is a road high gear that you would use only in 4 HIGH (or 4H) on your shifter. 4L (or 4 Low) would only be used in a very slow speed hill climb. You would NEVER use 4 Low on the road.

Oct 25, 2009 | 2005 Ford Ranger

1 Answer

None of the gears will engage


it sounds like something broke inside the transmission

Jun 16, 2009 | Ford Ranger Cars & Trucks

1 Answer

2005 ford ranger 4wd front driveshaft


NO when in 2wd the front tires will not turn. I have the same truck

Mar 24, 2009 | 2005 Ford Ranger

Not finding what you are looking for?
2005 Ford Ranger Regular Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...