Question about 2005 Ford Ranger Regular

1 Answer

The truck dosen't go on passing gear what could be the problem

That pretty much it just does not go on the passing gear when you floor the pedal

Posted by on

  • 2 more comments 
  • mike guilbault Apr 20, 2014

    Hi Daniel , I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?

  • Daniel
    Daniel Apr 20, 2014

    Is bending the tin appropriate

  • mike guilbault Apr 20, 2014

    Obviously any part put on the truck by ford has a purpose. As long as it doesn't bind any moving parts afterwards it shouldn't be an issue. You might get a little noise eventually while shifting. Nothing serious though

  • Daniel
    Daniel Apr 20, 2014

    Thanks for your time i appreciate

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

V-6 or 4-cyl?

Posted on Apr 20, 2014

Testimonial: "i figured it out it had to do with the shift rod where the shift cable links. Its a v6 4.0L by the way the problem was quite simple, just a matter of bending the tin slightly it actually solved two problems before i did that it would not go into park as well. i guess the cable did not go far enough or to far but it works. still need your advice is bending the tin appropriate . thank you for your time."

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
aliensanity
  • 24 Answers

SOURCE: clutch pedal not returning to position

Under the dash look to see if there is a spring attached to the petal or maybe under the hood. Or you might have something getting in the was of the petal arm. Good Luck and PEACE

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the passing gear on a 2003 Mitsubishi Diamante


'Passing gear' is a term that means the transmission is down-shifted to a lower gear (e.g., from 5th gear to 4th gear) for improved acceleration to pass another vehicle. There is no physical component called a passing gear in the transmission.
To engage the 'passing gear' with an automatic transmission should require nothing more than pressing the accelerator pedal down firmly. The transmission should downshift automatically to the next lower gear (sometimes it will downshift two gear ratios, depending on your speed and how far you depress the accelerator pedal).

Aug 09, 2017 | Mitsubishi Cars & Trucks

2 Answers

No passing gear when pedal is pushed down to floor on 1970 f 250 ranger xlt


Hi, it sounds like you have to get your clutch bearing checked.

Jan 17, 2016 | Cars & Trucks

1 Answer

Losing power going up hills


sounds pretty normal. what speed do you try out the passing gear? anything above 35-45 mph and it will feel like neutral. Passing gear is actually only 1st gear. When you press down the pedal, it forces the transmisson to shift into low gear.

Dec 16, 2013 | Oldsmobile Alero Cars & Trucks

1 Answer

Loses power at about 55 mph


cattalatic converter is going bad

Apr 07, 2013 | 1991 Ford F150

1 Answer

The clutch pedal seems to be very flopy and is not going into gear easily


Can be broken spring on the cluch pedal in side the car, that hold the pedal all the way back for full amount of brake fluid to the slave cylender, can be checked by pulling the pedal all the way up before steping it to the floor and putting in to gear or just look up under the daschbord on the pedal. Can allso be to little brake fluid in container. To check the master cylender rubber, step on the pedal putt in gear with engine running and wait with pedal all the way to the floor, if the rubber is gone the car wil start to go after some time (1/2-1 min or less) To check the slave cylender rubber will be dune the same way and working same way but it will be leaking out and on the floor.

Jun 18, 2012 | 1999 SsangYong Korando

1 Answer

My clutch pedal used to be pretty stout and the clutch would engage at about the midway point to the floor. All of a sudden the clutch pedal is pretty free to the floor where the clutch now engages. what...


sounds to me like the clutch master cylinder might be bad usually this happens when the line or the clutch master cylinder leaks fluid and you lose pressure to your clutch pedal...you should have a hydraulic clutch on this truck...if its leaking it will need to be replaced its located under the truck usually on the drivers side mounted on the transmission bell housing...hopes this helps

Mar 21, 2011 | 1985 Toyota Pickup

1 Answer

My 87 Supra Turbo Clutch Pedal is sitting about 2 inches off of the floor board. The clutch itself appears to be working, I just hate that it's on the floor. I've put the clutch under heavy load while in...


I believe you have a hydraulic clutch. You may be low on fluid in the master cylinder for the clutch. If it is low, it takes regular DOT3 brake fluid. After you fill it, you might have to drive it a day or two for it to recover.

Feb 22, 2010 | 1987 Toyota Supra

1 Answer

No passing gear


My car did (past tense) the same thing. The service engine light is flashing until you let off the gas because raw fuel is being dumped into the catalytic converter. The transmission won't shift because the converter is plugged. When you push the pedal to the floor the transmission computer holds the transmission in gear. Meanwhile the engine computer is raising the rpms. It will seem like a transmission problem but it is more likely a plugged catalytic converter. I had converter changed. The engine has A LOT more power, great acceleration and the transmission shifts perfectly.

Jan 26, 2009 | 2002 Pontiac Grand Prix

2 Answers

Engine bog down


check for clogged catalytic converter

Oct 29, 2008 | 1999 GMC Sonoma

Not finding what you are looking for?
2005 Ford Ranger Regular Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...