Question about 2000 Ford Focus

1 Answer

Truck u bolts torque setting

Just replaced bushing took diff out require torque settings

Posted by on

  • dan lincoln May 08, 2014

    Hi Ivan Sokolich, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box? bolt torque is available free at the public library tell the library you want car database time, look it up there

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,100 Answers

I do not know the exact torque, but your dealer does, it is critical. Too loose is better than too tight. If it is too tight, you will be walking home. I hope this helps.

Posted on May 08, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: torque settings

Torque Specifications Description Nm lb-ft Brake caliper retaining bolts 28 21 Brake hose to brake caliper union 15 11 Brake caliper anchor plate retaining bolts — 2.0L Duratec ST 133 98

Posted on Mar 15, 2009

c17hydro
  • 2984 Answers

SOURCE: torque settings for a 1989 ford escort, 1.9L

The answer is tighten the bolts to 17-22 ft lb

Posted on Mar 17, 2009

alicantecoli
  • 22095 Answers

SOURCE: require ford escort rs 2000 1976 torque settings head bolts

2lt overhead cam with them horrible tappet adjusters,cast iron head but valves dont hit the head if the timing belt breaks ,but it does on the 1600 .called a pinto in america .Remember the assembly line well ,have many a fond memory of working on it and the staff canteen on night shift ,what lovely grub we got.Head bolt torque is about 80lbs because i used to pull them down to check them after the machine had tightened them up

Posted on Apr 24, 2009

tneubauer
  • 437 Answers

SOURCE: Torque settings on a 1999

There are 2 different tranmissions in this vehicle. Make sure you know which one you have when selecting the torque settings. Do notice the 5R55E pan bolts are tightened in inch pounds. 4R70W Torque convert drain plug. 21-22 ftlb Pan bolts 9-11 ftlb 5R55E Pan bolts 115-133 inlb Ford Rear end Pan bolts 33 ftlb

Posted on Jun 05, 2009

  • 134 Answers

SOURCE: need the torque spec on the rear diff. cover bolts - 2005 F-150

just tighten them down you dont need to torque them its not nessary.

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the torque setting for the bolts in the radius arm on a toyota landcruiser


10 would be the grade of the bolt. google tensions for diameter and thread pitch of your bolt

May 04, 2014 | 2007 Ford Sport Trac Limited

1 Answer

Retorque specicifications for head


Hi Moz, Make sure to use replacement bolts or if reusing, make sure none have stretched. The torque settings for the "A" series engine is 27 NM. After tightening to that torque, paint a dot of white paint onto each bolt head facing directly forward. Further torque settings use angle settings. Continue tightening a further 90 degrees. When all bolt have been tightened a further 90 degrees, continue an additional 90 degrees, (180 degrees) until painted dots on each bolt head face backwards. No re-torquing is required. Regards John

Feb 15, 2013 | 1994 Toyota Corolla

1 Answer

I took my 97 Intrepid to a mechanic and was told I need sub frame bushings replaced. The will charge me about $900. Is ir possible for me to do the work myself. I do some smaller work on my autos myself....


Hi Derek,

My God...Sure is a terrible thing to be charged such a rediculous outragous price!

Yes, you can do this cheaper, by doing it yourself. But,..It isn't an easy task and you have to be very careful!

Compare prices between Auto Zone & Advanced Auto, they both price match. Also, they both rent out tools relatively cheap and the Bushing's for your vehicle costs about $57.99 each.

You will need all (4) bushings required for your vehicle, a jack and jack stands for the front part of car to rest on. Not too mention tools!

Basically it is a (4) bolt cross pattern under your motor, which requires your motor to held with a jack itself, so you have to be careful that you don't damage your engine, Once you get the bushings changed out, you will have to set and torque each one.

There isn't instructions in the Manual on how to do this...but both stores I mentioned can guide you through the process and can give you the torque settings.

I don't know how you are set up on tools or money etc,. so,.. If I was you Derek, I would get some more quotes on prices to have it fixed by a mechanic, that way, you are covered under a warranty!

The parts alone are going to put you over the $200.00 mark! I would rather have the headache searching for quotes with different mechanics, than worrying about damaging my motor, or risk having the motor fall on you and hurting you!

Best of luck to you, I'll give you tip you could try? Since school is back in session, you might see if a local High School (SHOP CLASS) will do the labor for you and you purchase the parts? You'd be surprised! They have licensed technicians over-seeing the students!

Kind Regards!

Martie

Sep 10, 2011 | Dodge Intrepid Cars & Trucks

1 Answer

I have a mk2 Cortina with a vibration in or around the rear of the drivesaft and or diff. I removed the driveshaft yesterday to find the diff flange nut loose. The cause of the problem or a result of the...


make sure you use sunray washers on all the bolts on the diff flange,as far as torque settings are concerned,two 8"spanners,one on each end with max hand pressure is enough.the vibration is a different kettle of fish,have you checked the long tube that comes out of the gearbox for the support bush,commonly missed.
had a 1600E for years,upgraded it to 1650 with a cosworth 16v head and twin webber 45s.went like s.. of a shovel.....then wrote it off.

Aug 15, 2010 | Ford Escort Cars & Trucks

1 Answer

Torque settings on a 1999


There are 2 different tranmissions in this vehicle. Make sure you know which one you have when selecting the torque settings. Do notice the 5R55E pan bolts are tightened in inch pounds. 4R70W Torque convert drain plug. 21-22 ftlb Pan bolts 9-11 ftlb 5R55E Pan bolts 115-133 inlb Ford Rear end Pan bolts 33 ftlb

Apr 05, 2009 | 1999 Ford Explorer

1 Answer

Differential Torque settings for 2003 Town Car


New cylinder head bolts are required and an angle guage,or you can make one up with card and a set square. Head bolt torque is 25Nm(newton metres)+60degrees + 60deg + 60 deg so it's a four step process.Con.rod bolts(big-end)28Nm,Inlet manifold 28Nm,Exhaust manifold 25Nm, Crank pulley 40Nm,Sump 5Nm and use locking compound (loctite)Timing cover 6Nm. Valve clearance,set inlets to .006" and ehausts to .010"(set approx.when cold then re-adjust while warmed engine is idling.

Feb 20, 2009 | 2003 Lincoln Town Car

1 Answer

Want to replace springs


Replacing springs requires new U Bolts also
Raise and Jack stand Body then use floor jack at diff to raise rear diff and remove U Bolts Easy wat torch or Die grinder w/cutoff wheel then remove the shackle or Bushing Bolts 2 each side yank out old reverse procedure to Install 1&1/2 to 3 hours

Jan 13, 2009 | 1987 Ford Ranger

2 Answers

1995 Land Rover Defender 130 300TDi settings


Check your side shafts first,wear on the drive splines are the most likely cause.Adjustingthe rear diff is quite a tricky procedure and you need to use a dial gauge to measure freeplay on the crownwheel.See what your nearest transmission specialist can do for you , he may give you a warranty on his repair and this will be cheaper in the long run.

Nov 18, 2008 | 1995 Land Rover Defender

4 Answers

Torque wrench settings


please understand there are a lot of items on a car that require torque settings every thing from the lug nuts to every engine bolt, and transbolt. please be more specific

Jul 03, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...