Question about 2002 Jeep Liberty

Open Question

How to remove k crossmember cradle from nissan sentra

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove frontseat from a nissan sentra 2003?


here is a copy of the factory service manual for your 2003 nissan sentra

http://www.nicoclub.com/FSM/Sentra/2003_Sentra/se.pdf

goto page 3 for the diagram and where to unbolt the 4 bolts

Apr 16, 2015 | 2003 Nissan Sentra

1 Answer

I have nissan sentra 99 motor 2.0 timing belt


Assuming that is a motor out of a 1999 Nissan Sentra this link should be a link to a Timing Belt Diagram. There is insufficient space to explain everything involved in removing the old one and all the parts that have to be pulled, if you need those directions I highly recommend you get the Haynes Repair Manual on a 1999 Nissan Sentra for those instructions.

http://www.2carpros.com/diagrams/nissan/sentra/1999

Aug 28, 2011 | 2002 Nissan Sentra

1 Answer

Remove back speaker nissan sentra se-r


I recommend trying to access from the trunk first, There should be 4 screws there to remove. If not, then the grille on top of the speaker should be able to be pulled off and then remove 4 speaker screws from there.

Nov 10, 2009 | 2003 Nissan Sentra

1 Answer

Need to know how to replace lower control arm


LOWER CONTROL ARM

REMOVAL
1) Raise and support vehicle. 3) Remove the steering knuckle.
Remove the bolts fastening the power steering cooler to the front suspension cradle crossmember reinforcement (Fig. 21). 5) Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing. NOTE: The bolts fastening the cradle crossmember reinforcement are of three different thread sizes. Note the location of the various sizes.

6) Remove the bolts attaching the cradle crossmember reinforcement to the front suspension cradle crossmember (Fig. 22). Remove the 2 bolts fastening the reinforcement and rear of cradle crossmember to the body of the vehicle. Remove the reinforcement. 7) Remove the pivot bolt attaching the front bushing of the lower control arm to the front suspension cradle crossmember. 8) Remove the lower control arm.

Sep 25, 2009 | 2006 Dodge Caravan

2 Answers

Alternator


1996 Nissan/Datsun Sentra 1.6L SFI DOHC 4cyl

Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide
The alternators for Pulsar and Sentra have not changed much over the years. However, the 1987-88 alternators for Pulsar and Sentra have a different internal diode assembly.
  1. Disconnect the negative battery terminal.
  2. Disconnect the 2 lead wires and connector from the alternator.
  3. Loosen the drive belt adjusting bolt and remove the belt.
  4. Unscrew the alternator attaching bolts and remove the alternator from the vehicle.
To install:
  1. Install the alternator and retaining bolts loosely.
  2. Install the belt and connect the wiring.
  3. Adjust the belt as outlined in . Torque the retaining bolts to 25 ft. lbs. (34 Nm).

I hope help you with this (rated this help).

Sep 11, 2009 | 1996 Nissan Sentra

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...