Question about 2000 Mazda MPV

Open Question

MY CONTROL IS NOT WORKING HOW I TURN OFF THE ALARM

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem is: Truseal model car alarm system TS2 - doors not locking, LED light not flashing on dash. how is this fixed


does alarm turn on off? sounds like several relays in alarm controller are not working, might be able to get new controller or have to replace it. if no clicks relays are gone

Jun 09, 2012 | Cars & Trucks

1 Answer

Alarm set


this is a factory alarm, the problem is the alarm is active, you will need to use the door locks to turn alarm off, insert key in driversdoor and lock and then unlock door this will turn alarm off, if that doesnt work then use pass/side door, the lock has a built in switch that knows when the door is locked or opened, the driversdoor may have a bad switch so inturn the computer thinks the door was forced opened without key and it is turning alarm on, so again use the key to unlock door try the pass/side if driversdoor doesnt work. good day

Nov 24, 2011 | 1998 Plymouth Voyager

1 Answer

My alarm keeps goin off when i connect my battery on my corsa sport r reg


When yo disconnected the battery, it set the alarm. If you have a remote control key fob, go ahead and connect the battery. Using the key fob, turn the alarm on then off. If that doesn't work, use the ignition key in the drivers door lock, turn the key all the way to the left, then all the way to the right. This should shut the alarm off. If it still won't go off, look for a reset button under the driver side dash. Hold the button down until the alarm beeps once. If you can't find a reset button, and nothing you've tried will turn the alarm off, you will need to seek help from a dealership, or a shop that specializes in alarms.

Feb 10, 2011 | Ford Escort Cars & Trucks

1 Answer

Neither key fob is working to open the car with


open door. when alarm goes off put key in ignition and turn it on start car. this should disarm the factory alarm.

Feb 08, 2010 | 2005 Chrysler Crossfire

2 Answers

98 Jeep how do you disengage alarm. Only have one remote


there is no way to do that being that the factory alarm is controled by the BCM (body control module) your only option is to go to the dealer and buy two new remotes and have them set to the frequency of your vehicle.

Sep 09, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Just had a lot of rain. Water was leaking into


You'll probably find that the alarm control unit got wet - it is sometimes located under the drivers or passengers seat, or under the kickpanels/dash - You may find that it dries up and works OK, or never works right again - I'd recommend fixing the leak first, then moving on to the alarm system... I'd be cautious with introducing H20 to the alarm control unit, as they can disable the vehicle from starting or running...

Aug 30, 2009 | 2003 Acura 3.2TL

1 Answer

Does any body know how to reset the ML350 alarm??....The remote control doesn't work after i replaced a new battery to the remote control. I couldn't even use the remote to lock/unlock the car. I was


SOME OF THE REMOTES REQUIRE THAT THE KEY BE IN THE IGNITION, IN THE ON POSITION. TAKE THE BATTERY OUT AND WAIT 10 MINUTES. THEN PUT THE KEY IN THE IGNITION AND INSTALL THE BATTERY WHILE THE KEY IS TURNED TO THE ON POSITION. HOPE THIS HELPS YOU. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

May 18, 2009 | 2007 Mercedes-Benz ML350

1 Answer

How to turn off the alarm manually without any use of a remote control


If the alarm is a "factory" alarm, cycle the key in the ignition from off to on (where the dash indicators light up), 5 times. This is the reset proceedure for the "factory" alarm.

Nov 04, 2008 | 1995 Toyota Camry

2 Answers

Alarm wont let me start the car


you need the remote control of the alarm to turn the alarm off.

you may need to change the battery of the remote in case it would no longer control the alarm or if you have a valet switch to turn off the alarm, then use it.

the immobilizer is working that is why you can not start the car.

tnx 4 using fixya,

drcool

Sep 13, 2008 | 1994 Nissan Maxima

Not finding what you are looking for?
2000 Mazda MPV Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...