Question about 1995 Lincoln Mark VIII

1 Answer

Fuel tank diagram

Where can I find a fuel pump with fuel tank gauge sending unit. Also what other vehicle would be compatible.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Contributor
  • 31 Answers

Posted on Mar 01, 2015

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: fuel gauge error

The best way is to use a gauge tester to vary the resistance to the dash gauge. You will need to unplug the harness back at the tank and connect there. It will either be a pink wire or a yellow wire to the gauge.

Posted on Aug 20, 2008

RJones1125
  • 373 Answers

SOURCE: gas tank sending unit for 1990 VII can i get

i have two units in my fuel tank. fuel pump AND tank level indicator. both items can be bought seperately.

Posted on Aug 03, 2009

SOURCE: Fuel pump/gas gauge issue? When gas gauge gets to half tank fuel pump light goes on and after a few miles engine backfires and runs out of gas. Is gas pump/gauge the problem?

Give use any codes you may have

I have a 2004 LS I will check my diagnostic
manuals for you

V6 or V8 ?

Posted on Sep 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel gauge malfunction fixes on a 2003 ford explorer?


The fuel level sending unit is integrated in the fuel pump, which is located in the tank. The age of your vehicle warrants replacement of the fuel pump as a unit. Never try to repair a sending unit Just make sure the float for the sending unit is free to swing when installing the fuel pump into the tank. Also empty water out of fuel pump well of the fuel tank

Jun 12, 2017 | Ford Cars & Trucks

Tip

Fuel Gauge 1999-2003 GM Vehicles


If your fuel gauge in your 1999-2002 GM vehicle is not working properly, the fault is most likely the fuel gauge sending unit in the tank. The fuel pump and sending unit are one unit so the entire assembly needs to be changed. The problem is almost never the actual gauge in the instrument cluster.

on Dec 01, 2009 | Chevrolet Silverado Cars & Trucks

1 Answer

Gas gauge staying at empty when tank is full


Spencer, Check all fuses ,plugs and grounding at the tank.The sending unit module, inside the GM's gas tanks were notorious for going bad in this err, when you changed it did you use a quality part? Also the fuel pump sending unit plug/wire harnesses were known issues, so much that replacement pumps would often come with replacement plug to splice into existing harness. Check the attached links,instruction and guides on how to trouble shoot fuel gauge/sending unit, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
General Motors Fuel Gauge Troubleshooting American Autowire
GM Defective Gas Gauge Leaves Owners Guessing
Fuel Gauge Tech How To Properly Diagnose Faulty Fuel Pump Sending Unit
GM Fuel Pump Level Sensor Diagnosis Testing

Aug 27, 2016 | 2000 Oldsmobile Alero

1 Answer

Fuel gauge Stuck


The most common way to find out is to test both components.
The sending unit in most vehicles grounds the gauge on the dash.
You would unplug the sending unit - pump harness at the tank and ground the sending unit wire. If the gauge climbs up to full the sending unit is at fault.
You could also measure resistance in the circuit in the tank when the tank is close to empty and after filling it up. The resistance should be different each time.

Mar 11, 2013 | Cars & Trucks

2 Answers

Where is the fuel gauge sending unit in a 2002 wrangler


The sending unit is located inside the fuel tank with the fuel pump module.

Aug 19, 2011 | 2002 Jeep Wrangler

3 Answers

I have to replace the fuel pump sock on a 1993 oldsmobile eighty eight,royal. wife has to work in the morning. it is 11 pm and i realy could use some advice. I have droped the exhaust pipe. and getting...


There should be under the seat an acess cover to remove hoses/wires from the assembly. IF not, then the tank should come down and then you can remove it.

You may be able to lower the tank, use a jack, and get in and remove the lines/wires then remove it completely.

Jun 09, 2011 | 1989 Oldsmobile Delta 88

1 Answer

1996 ford ranger fuel gauge stuck on empty


It's not really easy to tell, you need to test for power and ground at the sending unit at the fuel tank, while someone is watching the fuel gauge inside the vehicle. 90% of the time (especially on Ford's) it's a faulty sending unit in the fuel tank, which is usually sold with the fuel pump...if not, I would replace the pump while I had the tank out anyway just as a precautionary measure.
. the "float' is the part that of the sending unit that registers fuel level and sends that

Dec 13, 2010 | 1996 Ford Ranger SuperCab

1 Answer

Is there an access hatch in the floor of a 1996 gmc safari for the fuel pump


no, sorry. Here are the R&R instructions from autozone.com:

The following procedure requires the use of the GM Fuel Gauge Sending Unit Retaining Cam tool No. J-24187 or equivalent.


CAUTION Before removing any component of the fuel system, be sure to reduce the fuel pressure in the system. The pressure regulator contains an orifice in the fuel system; when the engine is turned Off, the pressure in the system will bleed down within a few minutes.

  1. If the fuel system has been in use, turn the ignition switch to OFF and allow the system time to reduce the fuel pressure.
  2. Disconnect the negative battery terminal from the battery.

Be sure to keep a Class B (dry chemical) fire extinguisher nearby.


CAUTION Due to the possibility of fire or explosion, never drain or store gasoline in an open container.

  1. Using a hand pump or a siphon hose, drain the gasoline into an approved container.
  2. Raise and support the vehicle on jackstands.
  3. Support the fuel tank and remove the fuel tank-to-vehicle straps.
  4. Lower the tank slightly, then remove the sender unit wires, the hoses and the ground strap.
  5. Remove the fuel tank from the vehicle.
  6. Using the GM Fuel Gauge Sending Unit Retaining Cam tool No. J-24187 (or equivalent) or a brass drift and a hammer, remove the cam locking ring (fuel sending unit) counterclockwise, then lift the sending unit from the fuel tank.
  7. Remove the fuel pump from the fuel sending unit, by performing the following procedures:
    1. Pull the fuel pump up into the mounting tube, while pulling outward (away) from the bottom support.


When removing the fuel pump from the sending unit, be careful not to damage the rubber insulator and the strainer.
    1. When the pump assembly is clear of the bottom support, pull it out of the rubber connector.


To install:
  1. Inspect the fuel pump hose and bottom sound insulator for signs of deterioration, then replace it, if necessary.
  2. Push the fuel pump onto the sending tube.
  3. Using a new sending unit-to-fuel tank O-ring, install the sending unit into the fuel tank.

When installing the sending unit, be careful not to fold or twist the fuel strainer, for it will restrict the fuel flow.
  1. Using the GM Fuel Gauge Sending Unit Retaining Cam tool No. J-24187 (or equivalent) or a brass drift and a hammer, turn the sending unit-to-fuel tank locking ring clockwise.
  2. Install the fuel tank, align the insulator strips and install the strap bolts. Torque the inner fuel tank strap-to-vehicle bolts to 26 ft. lbs. (35 Nm) and the outer fuel tank strap-to-vehicle nuts/bolts to 26 ft. lbs. (35 Nm).
  3. Connect the fuel lines.
  4. Connect the negative battery cable, start the engine and check for leaks.
  5. Lower the vehicle.

Sep 19, 2010 | 1996 GMC Safari

1 Answer

How to change a fuel pump on a 2005 Nissan


Nissan Car Altima & Sentra 1999-06 Repair Guide
Fuel Pump - Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Relieve the pressure from the fuel system.
  3. Remove or disconnect the following:
    NOTE When the fuel sending unit needs to be removed, pull the tab upwards. The tab is located on the sending unit, opposite the end of the float. After the tab is pulled, the sending unit will lift straight out of the tank bracket.
    Negative battery cable Rear seat and the access cover Fuel pump electrical connector Fuel lines from the fuel pump assembly Locking ring Fuel gauge assembly Fuel tube and connector from the fuel gauge
    Fuel pump by pinching the 2 locking tabs together. Lift the fuel pump assembly straight upward and out of fuel tank. O-ring and discard
  4. Place a clean rag in the hole to keep out dirt.
To install:
  1. Remove the rag
  2. Install or connect the following:
    NOTE Verify that the mark on the fuel tank and the components are aligned when installing the pump and fuel gauge sending unit.
    New O-ring and fuel pump Electrical connection and fuel tube to the fuel gauge sending unit Fuel sending unit into the tank
  3. If equipped with a threaded lock ring torque the ring to 22-26 ft. lbs. (30-35 Nm). If equipped with a lock ring held by six retaining screws, torque the screws to 18-22 inch lbs. (2-2.5 Nm).
    Fuel lines and fuel pump electrical connector. Always install new clamps on the fuel lines. Negative battery cable
  4. Start the engine, check for leaks and repair if necessary.
    Fuel pump access cover Rear seat

The fuel pump is located in the fuel tank on all vehicles. In-tank fuel pumps are accessible by lifting up the rear seat to gain access to the inspection cover.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:
    Negative battery cable Rear seat from the vehicle Inspection cover that is located under the rear seat Inlet and outlet fuel lines from the fuel pump assembly Fuel pump and gauge wiring connections 6 mounting bolts that secure the fuel pump assembly to the top of the fuel tank
  4. Raise up the fuel pump assembly and detach the fuel tubes and connector.
    Fuel gauge assembly Fuel pump with the fuel chamber
  5. Pull up the front of the fuel pump chamber and slide the chamber forward.
    Fuel pump from the chamber O-ring seal or gasket
To install:
  1. Install or connect the following:
    Fuel pump to the fuel pump chamber and slide chamber rearward Fuel pump with the fuel pump chamber Fuel gauge assembly using a new O-ring Fuel tubes and connector. Use new hoses and clamps. 6 mounting bolts to the top of the fuel gauge unit and torque the bolts to 18-22 inch lbs. (2-2.5 Nm) Fuel pump and gauge wiring connections New inlet and outlet fuel lines to the fuel pump assembly Negative battery cable
  2. Start the vehicle, check for leaks and repair if necessary. Inspection cover and the rear seat

Hope helps (remember comment and rates this).

Jul 07, 2010 | 2005 Nissan Sentra

1 Answer

Where is the fuel pump located and what does it look like (Mazda 94 Proceed)


I believe this is same truck as Ranger

Pump is in tank

Removal
NOTE: On some vehicles, fuel gauge sending unit is not available separately. On those vehicles, to replace sending unit, replace entire fuel pump .
  1. Remove fuel tank as described in this section.
Removal and Installation
NOTE: Make sure fuel tank is properly supported during removal and installation procedures.
  1. Drain fuel from fuel tank .
  1. Loosen fill pipe clamp.
  1. Remove bolts securing shield and bracket assembly to frame (5005) and remove assembly from vehicle.
  1. Remove fuel tank filler pipe from vehicle.
  1. Support fuel tank .
  1. Remove bolts and nuts from rear fuel tank support strap and remove rear fuel tank support strap .
  1. Remove bolt and nut from front fuel tank support strap and remove front fuel tank support strap .
  1. Lower fuel tank .
  1. Remove fuel feed hose at sender push connector.
  1. Remove fuel return hose at sender unit push connector.
  1. Disconnect sender and fuel pump electrical connector.
  1. Remove fuel vapor hose from fuel vapor valve .
  1. Lower fuel tank from vehicle
  1. Remove fuel tank to bench. Remove any dirt that has accumulated around the fuel pump attaching flange so that it will not enter the fuel tank during fuel pump removal.
  1. Turn the fuel tank sending unit locking retainer ring (9A307) counterclockwise with the Fuel Tank Lock Ring Wrench Tool T90T-9275-A or T86T-9275-A and remove fuel tank sending unit locking retainer ring .
  1. Remove the fuel pump and sender assembly.
  1. Remove fuel pump mounting gasket (9417) and discard.
  1. If necessary, disconnect spade connector and remove two screws and fuel gauge sending unit.

Jun 25, 2009 | 1994 Mazda 2WD B Series Pickup

Not finding what you are looking for?
1995 Lincoln Mark VIII Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...