Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 18, 2014

Cod #P0641 GMC Yukon Denali 2008 - Yukon GMC Cars & Trucks

5 Related Answers

Anonymous

  • 375 Answers
  • Posted on May 18, 2008

SOURCE: '04 GMC Yukon Denali Check Engine Light

Did u put in fuel shortly before the light came on? I own 2 service centers & the most common situation with "Check Engine" lights are because the fuel cap wasn't re-installed or not tightened. When you refuel make sure it "clicks" when putting back on. We don't charge for a "Code Reading" but a dealer will, don't go there. Go, like the others suggested. If it is the fuel cap & you re-install it correctly, the light will go off after a short drive. Good Luck. PS-Don't panic when the "Check Engine" light comes on unless it blinks, if that happens don't drive. PSS-RE: Murray's, Auto-Zone.......If it's a "Code" (the reader will give a #) the code book will tell you the problem. PSSS-Some1 please have Troy W's Mommy & Daddy take away his keyboard. Just because you can put together a "Lego" car doesn't make you a master mechanic. You only repeated what we said except you have a "Napoleon" complex against any1 plugging something in to a vehicle. It's the same as plugging in a light @ home. In conjunction with "kinder" nine out of ten time in my experience it usually is the oxygen sensor(s) which would be about right with the year model

Ad

Anonymous

  • 1 Answer
  • Posted on Oct 20, 2008

SOURCE: location of fuse box/panel for 2004 yukon denali xl

There are 2 fuse panels in the Denali.
One is a panel on the drivers side, its on the dash but facing the door.

The ohter is under the dash and above the pedals, this one is much tougher to access.

Your Owner's Manual should tell you where the fuses are that you need to access.

Anonymous

  • 94 Answers
  • Posted on Mar 16, 2009

SOURCE: 2005 gmc yukon xl denali service ride control

it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you

Anonymous

  • 57 Answers
  • Posted on Jun 14, 2009

SOURCE: lost reverse on GMC Yukon Denali vortex drives

WOW sorry to hear that.

this is a common problem with the 4l60e transmission, what has happend is the gear has sheared off the back of the sun shell, you should have lost reverse and if you will watch your tachometer the next time you drive you will notice you allso lost forth gear.

you will nedd to have the transmission removed and disassembled for the new sun shell, make sure you get the hardened sun shell, this is not a rebuild but simply a repair. you can get a stock sun shell for about $65.00 or a heavy duty one for about $100.00, make sure you find a good tranny guy to provide the labor, oh the transmission paper rubber kit "reseal kit" shouldnt be more than about $80.00

good luck

[email protected]

Anonymous

  • 10 Answers
  • Posted on Dec 11, 2009

SOURCE: Heated seats won't stay on in 2004 GMC Yukon Denali

See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they don't work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and mesing up the seat module which controls the heaters too. My 05 Suburban had the same issue

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Does anyone have pinout diagram E38

You don't say a pinout of WHAT?

https://www.google.com/search?q=pinout+diagram+E38

Denali Radio?

GMC Yukon Denali 2014 - SYSTEM WIRING DIAGRAMS

https://portal-diagnostov.com > 2020/04/13 > radio-gm...

Apr 13, 2020 - RADIO - GMC Yukon Denali 2014 - SYSTEM WIRING DIAGRAMS Dual DVD Headrest Wiring Diagram. Get Access all wiring diagrams car. Radio Wiring ...

GMC Yukon XL pinouts - PinoutGuide.com

https://pinoutguide.com > dev > GMC > Yukon+XL
Here are pinouts for GMC Yukon XL devices. ... There are 6 pinouts found for GMC Yukon XL . The pinout (pin-out) ... The pin outs diagrams are listed below.

..
0helpful
1answer

Sounds like a sprocket in my 2008 Yukon denali striped out. Goes in reverse but not forward

Could be a valve body problem, a shift solenoid problem or the transmission control module causing this.
0helpful
1answer

Everytime I start up my 2010 Yukon Denali, the clock on the panel reads 1 hour more? I reset it and the next time that I start it, it changes again.

Weird, are you resetting the clock and finishing the setting as per your manual. Your navigation zone could be throwing it off, make sure you have correct zone for where you are. press the helpful button, and check video link below.

How to Set Clock and Search Area on 2010 and 2011 GMC full size Navigation

How to Set the Clock on GMC Yukon 2007 2013 2008 GMC Yukon Denali 6 2L V8
0helpful
1answer

LOW OIL PRESSSURE 2008 GMC YUKON DENALI

2008, I would start with replacing the oil pressure sending unit. Or maybe adding oil.
0helpful
1answer

My 2008 gmc yukon denali middle row windows don't roll down all the way? child safety for sure, but can the "safety" be unlocked?

This is normal operation for these windows, there is no way to get around it as the tracks in the door are onyl long enough to allow them halfway.
0helpful
1answer

2008 GMC Yukon Denali XL. Just turned on the car and no audio

This is an electronics issue.

See all the fuses.

Cheers.
13helpful
1answer

What the normal transmission temp Yukon Denali XL 2008

TRANSMISSION FLUID NORMAL TEMPERATURE IS 200 DEGREES.
Not finding what you are looking for?

185 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...